[SOLD Axial SCX24 Jeep JLU CRC RTR - price reduced 15.04]

24 minutes ago, 83alan83 said:

Hi Dave is the scx14 still available ? 

Still available - its an SCX24 just to note  

[DJI Mavic Mini v1 Fly More Combo - reduced 20.04]

Bump!!

 

Offers considered and can only say no....

[The Traxxas trx4m owners thread]

1 hour ago, Lone-wolf said:

Gonna order the Traxxas 4m Ford F-150 end of month, as im waiting on a bodyshell to come in stock, do i get Brown, Blue or Black, will be removing the roll bar as i dont think it looks right, also i would like to remove the front super white lights and go with warm white but i gue ss i wont be able to do that

 

If the LEDs in the F150 are similar to the Defender its a doddle (if you can solder). Bought plenty of 12v 3 and 5mm LEDs to replace the stock ones on most of my rigs

[SOLD - HPI Micro RS4 Ken Block Fiesta + extras - reduced 20.04]

Price reduced and last bump

[SOLD Axial SCX24 Jeep JLU CRC RTR - price reduced 15.04]

Reduced to £70 and last reduction before closing thread 

[DJI Mavic Mini v1 Fly More Combo - reduced 20.04]

[DJI Mavic Mini v1 Fly More Combo - reduced 20.04]

[DJI Mavic Mini v1 Fly More Combo - reduced 20.04]

DJI Mavic Mini v1 Fly More Combo

 

Purchased brand new approx 2019

In very good condition, never crashed

Full working order 

Includes:

DJI Mavic mini v1 drone

DJI controller 

2 x USB-C cables

Charging Dock

2 x DJI batteries

Carry case

Mains charger and cable

Prop guards

3 packets 2 x spare props

Original box & packaging

Can upload a video of flying if required

 

 

 

 

More pics to follow

 

Price £210  £190 including fees and postage,

offers considered, I can only say no

[SOLD - HPI Micro RS4 Ken Block Fiesta + extras - reduced 20.04]

HPI Micro RS4 Ken Block Fiesta

Excellent condition and minimal use

Drift tyres fitted

Spektrum SR210 2ch receiver

HPI EN-2 esc with EC3 connector 

Lipo alarm

4 additional body shells

5 additional sets of wheels 

2 additional sets of tyres, 1 drift 1 smooth rubber 

 

 

 

 

 

 

 

 

 

 

Price £170 £140  £120 £100 Inc fees and postage 

 

NOW SOLD

[Tamiya Scania R620 Highline 6x4 BNIB]

Price reduced 14/03/24

 

[SOLD - GT Power container truck light and sound module BNIB]

For sale  GT Power container truck light and sound module

Brand new & boxed, never fitted to a build

 

Brand: G.T.POWER

• Working voltage: 7.4-12V (2S-3S Lipo)
  Maximum power current: 2000mA
  Length of light cable: 500mm
  Vibration motor: 50 * 40 * 61mm
  Control board size: 88 * 45 * 20mm
  
  Contents

• 1 * Control Module
  1 * Stereo Voice Box
  1 * Vibration Motor
  4 * ESC Connect Cable
  2 * Power Supply Connect Cable
  6 * 5mm White Light
  2 * 3mm White Light
  2 * 5mm Red Light
  1 * 3mm Red Light
  4 * 3mm Yellow Light
  1 * Operation Manual

•  

 

 

 

Price £40 inc fees and postage SOLD

 

[Tamiya Scania R620 Highline 6x4 BNIB]

For sale BNIB Tamiya Scania R620 6x4

Purchased and sat in box and unbuilt

Comes with additional bearing seat

 

Scania R620 6x4  features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck.

The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model.
About the Model

• 1/14 scale electric R/C assembly kit of the Scania R620 Highline.
• Aerodynamic body is precisely reproduced and front grill features mesh material for realistic look.
• Faithfully reproduced cabin tilts forward separately from fenders, just like on the full-size truck.
• LEDs accurately recreate the trucks front and rear lights (not included)
• Fender interiors and exteriors are fully depicted for the ultimate in accuracy and realism.
• Durable ladder frame chassis consists of aluminum channel and resin cross member.
• Kit-included coupler enables use of any of Tamiyas currently available 1/14 scale trailers.
• Includes 3-speed transmission.
• Use of separately available 4-channel transmitter allows gear shifting during running.
• Front and rear suspension consists of metal leaf springs and coil spring dampers.
• Durable die-cast metal front axle is float mounted on leaf spring and damper.
• Resin rear axle features differential gear.
• Propeller shaft transmits power from front mounted motor to rear wheels.
• Pin type propeller shaft joint reduces friction loss.
• Type 540 motor included.

 

 

 

Price £300 £275 inc fees and postage

 

Any questions please get in touch

 

 

[FMS FCX24 owners thread "Blazer,Powerwagon,smasher and Unimog"]

On 06/01/2024 at 09:55, Lone-wolf said:

Might be tempted to perform this mod, what spec LED`s did you use and did you join rear light wires into front wires

 

LEDs are red 3mm 12v from ebay - only a few quid for 5

 

I joined the 2 rear LEDs together and ran to the front  to join front LED supply

[SOLD Axial SCX24 Jeep JLU CRC RTR - price reduced 15.04]

Price drop to £85.00 all in 

[SOLD Axial SCX24 Jeep JLU CRC RTR - price reduced 15.04]

Another one to be released for sale

 

Axial SCX24 Jeep JLU CRC

 

Modified with some 3D printed parts and accessories as shown in pics

 

Excellent condition, barely used approx 3 batteries through it.

 

Ready to run complete with transmitter, charge lead and Zippy 350mAh lipo (original one failed)

 

Includes original box/packaging

 

 

 

 

 

 

 

 

Price inc. fees and postage £95.00 £85.00  £70.00

 

 

[Tamiya CC01 Land Rover Discovery LR3 ver3.5 updated]

17 hours ago, Lr3 mad man said:

Hi @Davy Crockett

 

where did you get that shell? And what scale is it? It looks amazing and I own a lr3 and wanted to make a rc version. 
 

really hope you can help.

 

thanks in advance Gaz 

 

Hi Gaz

 

The shell is from a New Bright Discovery RC car, few pop up on ebay from time to time. 

 

Chucked the 'toy' chassis and used the shell on a CC01 chassis.

 

Its been painted yellow since these pics but wasn't that happy with it and got another shell few months ago.

 

Let me know if its of any interest if you can't source one and I'll root it out loft

[The Traxxas trx4m owners thread]

Had a visit to the bodyshop.... 

 

 

 

[Lego fanatics]

20 hours ago, Gaz! said:

Wow, thats a beauty!! 

 

are you going to do a running video for it mate??

 

14 hours ago, wolfie1 said:

I really hope there is 1 too, really want to watch it unfold pop up lift something slew round drop it and then fold up again

 

Not sure about a running video.

 

The kit isn't the same quality as true Lego and motor power/gearing gives limited movement. 

 

Since everything has been put together, the boom extending and slewing doesn't work but it's something I may try to remedy

 

 

[**** SOLD **** Kyosho ReRe Turbo Optima ****SOLD****]

Pm'd

[Lego fanatics]

Construction complete, just have to configure motors in the control app.

 

Think it'll end up being a static display piece  😊

 

 

[The Traxxas trx4m owners thread]

20 minutes ago, Gaz! said:

 

Would love to see some pics of your wooden obstacles and outdoor track,

I’ve  been in the building a outdoor track for a while now, we changed it from being a 10 gate 1/10th course to a 1/18 adventure playground but my health has declined somewhat this year so unable to do much, using mostly stone and some kerb edges, old fashioned ridge caps even got some waste drain pipe off cuts to make a couple of tunnels, i will try to get a picture of it so far.

as for the indoor folding course, its still in my head at the moment but i might sketch it out if possible and take a pic. 

 

 

Yeah that would be the main worry, i could make each obstacle difficult to overcome, finishing the track with 0 points would be a perfect drive, that should help keep interest for a bit longer, could always try to be able to move the some of the obstacles moveable to be able to create more tracks, that maybe the way to go but i would definitely need my thinking cap, cup of tea and a pencil/paper lol. Doable though…..

 

i will get the original outer bit down on a drawing, post that then have a look at what obstacles i can make with what ive got or can get. 

 

@Gaz! here's an idea for indoor course, can be arranged and put away easily.

 

Also done one for outside on an old table - will take some pics when I get home

 

 

 

[Lego fanatics]

Slow progress, mainly due to mediocre instructions and having to pull apart and redo

 

Tough part ahead, getting 3 control modules to power 12 motors with a chinese app 🤪🙈

 

 

 

 

 

[Lego fanatics]

Not much to show for 5 hours building.  Two thirds through book 1

 

 

 

[Lego fanatics]

16 hours ago, H1q said:

Woah! That’s a BEAST! 👍

I imagine you haven’t thought about where you’re gonna put it once built! 😂

 

 

 

No, its a minor detail and more interested in the build!!  

 

Corner of  front room with jib fully extended and a light on top, tell mrs its her new lamp

 

15 hours ago, Stormbringer said:

Wow thats quite a kit 

 

I had same thought when I picked it up!

 

2 pics before I disassembled it.... 😮 😮 

 

 

[Lego fanatics]

Been thinking about another technic build for a while and nothing much has caught my eye of late.

 

Feb22 I was looking at either the Liebherr face shovel or Cat D11, earthmoving and plant is my job and the dozer won.  Still look at the Liebherr and whilst browsing ebay I spotted and inadvertently won this! the kit and not just the book!!

 

 

Was 90% built but I've since dismantled to a million pieces and commenced complete rebuild.... should keep me occupied for a bit!!!!! 👍