fasi

first pic is the spur with stock pinion and second is with the pinions i bought which are good for nothing... http://www.msuk-forum.co.uk/gallery/image/27378-/ http://www.msuk-forum.co.uk/gallery/image/27379-/

okay, i got a FS Racing 4wd 10th scale truck, its got a 62t middle spur and 22t stock pinion, which makes my 4000kv 4pole a quite hot on speed runs, so first i ordered 48pitch 19t 20t 21t pinion which was not the right fit for the spur,so then i ordered 32pitch 19t 20t 21t pinion, which don't fit the stock 62t spur either.. very confused now, what could be the solution to my problem?? cheers guyz...

ok guys just installed my v1 rx on my old v2 frame and motors and took a small flight and it is sweet as suger, sorry for no video as youtube is blocked in our country for some political reason.. few pics for u lot...cheers http://www.msuk-forum.co.uk/gallery/image/26717-/ http://www.msuk-forum.co.uk/gallery/image/26718-/

okay guys just received my 13t mod1 pinion from h-k for my mt4g3, will do the pinion swap from 12t stock to 13t and 2000kv stock ripper motor to 2000kv hobbywing 4pole motor. will let u guys know the outcome soon. cheers

i am wondering why this baja's clutch didn't engage itself on such a high idle, must be really good compression....cheers for the clip.

ok guys, short circuit my v2 few dayz ago and decided to upgrade this v2 3axis rx to 6axis so, ordered a v1 6axis rx from h-k for 35$ as i already have devo 4 tx from previous purchase of v2. will assemble it today and post some pics for my fellow hobbyists later today.. cheers.

aah, i get it, its the tx rx u r using brov, and by the way which one u r using? i had the same problem when i was using h-k-300 tx rx, they r quite ****y for long haul.. try a different tx rx and see what happens...

brov, by just looking at the car, my heart says go for a 150a hobbywing wsc and a 2000kv motor, and throw a 4s pack in it, and see it fly...

oh ok, i didn't know that, so a copy of a copy would not be good idea to go for right...

guys i have just confirmed from the seeler of this chinese high copy of rcmk product, when i asked him if the engine is the product of rcmk brand, so his reply was, RCMK ENGINE? so guys the seller doesn'et even know the original company brand they r using to sell their high copy ****... cheers .

cheers mate.

there is only one wire that comes out of the esc along with the on/off switch wire u know...the one usually goes in rx as throttle wire plug. what do u mean r46, like take out the fan plug and use that port using an extension lead , is that what u r saying,oh that two way lead that came with the esc in the box right... like connect one end to the fan port and other to the box right...?

guys i bought earlier a hobbywing 150a sd exerun esc with a led programing card and now i bought another hobbywing exrun 120a sd esc few dayz ago without led programing card, the problem i m facing is the programing card of 150a esc doen't work with 120a esc, whereas the hobbywing website says the exrun series program card works with all esc models... any help would be nice. thanks.

just make sure u smooth out the edges before sticking ur lipos in otherwise those sharp edges can give ur lipo a sharp bite...cheers

okay guys, today i went out and bought myself a bag of 4mm by 200mm zip ties containing 100pcs in it as the bag says, but i don't think so, anyway i didn't go into counting them out, and then i made a 'KYLE TARPLEY' style ar drone landing gear, and checked the level of all four on flat surface with an iphone app 'iHANDY LEVEL' and it was giving me 0.01, so i think its good. also cut out 4 foam pieces to cover the bottom ends of the motors as i realized when i took drone out first time in open field last weekend, it collected dust like magnet collecting particles in sand, here some pics for the sour eyes... cheers... http://www.msuk-forum.co.uk/gallery/image/26039-/ http://www.msuk-forum.co.uk/gallery/image/26038-/

i got a sandmaster too, upgrades are, 120a hobbyking sensored esc, 3400kv 4pole sl hobbywing motor, steel-head ace-rc steering servo, rear oil-filled shock, front stock 2s 4000mah lipo fits like a glove in the bottom tra.. cheers.,

my opinion is , she must be flooded, take the exhaust pipe off, plug off,cut the fuel supply and bend her over, put a dry piece of cloth infront of her exhaust hole and pull the starter like good 5 or 6 times see if she cough some fuel out of its exhaust hole,after that close h and l needle and do default needle setting on ur carb,stick the dry plug and then give her a go see if she speaks ur language. cheers.

okay guys, today i went out to have some fun with my fg, but after few mins of running the engine died on me, so i thought might just change the plug right, tried like 5 different plugs but to no avail, then i realized that the air-filter unit is soaked with fuel mixture??? any help would be highly appreciated.

well thanks skuzzy, for me tbs is like a 1 year old kid asking for a super bike,u know what i mean, yeah about dji vision, i myself was having second thoughts for looking for something else in that price range.. cheers for sharing all the details of ur setup.. happy flying.

well the thing is, i had a nimh pack lyiing around doing nothing,so i thought why not try it, and about getting a real quad copter, well u said it, but first need to fully understand the fpv usage before i plunge into it, u know like dji vision stuff... cheers.

ok guys, some updates, bought a new range extender tplink wr830e for about 35$, set it up with my ar drone using ar free flight app and powered by 8cell nimh 4200mah , and today i went fpv first time, thought it was just around my house in the safety and comfort of low altitude mode, i think every hobbyist should try fpv for once in their life, and yes the range extender does work, alot cheaper and better than rc radio mod or miru mod, cheers guys,

there r no reverse or brake function on flying transmittes, so u got to go with the surface tx rx...

oh yeah, the head looks awsome bro...

simply awsome bro... i m also prepping my Ar drone v1.0 for some fpv fun which i just bought, but before i step out i would like to go 2.4ghz by macdrones or mirumod and them taste the true meaning of fpv fun...cheers

well, u certainly know what u r talkin about.. thanks for that head up.. will give this method ago, and let my fellow hobbyist know... cheers