fasi

the intake fuel line should be the tanks length on the inside, and the overflow line should be few inches inside of tank would be fine.

awesome-attic... really nice brov, just don't get it dirty plze... cheers.

love the detail u provide corbs, can u tell me what those pipes are for at both ends of rare suspension filled with some sort of fluid in them??? cheers...

what happened to me was i took stock 6000rpm clutch shoes out and installed 8k rpm shoes and could not figure out for long time what was making the clutch engage all the time even on idle. finally after a long long hours of staring at my fg stadium truck 26cc if i may add,with fg tune pipe, the 8k rpm clutch shoes require 9mm bolts and not the stock 8mm clutch bolts which caused the clutch to stick to one side of clutch bell and not come back to its original spot... cheers guys have a good one.,

check the h needle to me she sounds like she needs more air my friend.

first thing first my friend, a dino pipe for this 2wd lady...

true that.

very sorry to jump into somebody's thread like that, hope u and the guy who opened this thread will forgive me for this silly mistake, and thanks for ur opinion, means a lot. cheers.

dear nitroholic i got a question for u, i just ordered a race ported 34mm big bore kit to use in my 26cc stock zenoah in my stadium 2wd truck, will it be okay to go for it to get a little extra power out of my engine?? kindly checkout the links if these r the right items for my stadium truck 2wd 26cc. cheers, http://www.davesmotors.com/race-ported-zenoah-25_4cc-34mm-big-bore-kit.html http://www.davesmotors.com/fg-06103-05-alloy-front-uprights-1_6.html http://www.davesmotors.com/fg-06250-07-tuning-disk-front-brake-set-monster-2wd-baja-4wd.html

??

get a fg stadium truck 2wd a neat one if u can trust me u wont regret it.. cheers.

well u won't believe i ran into a 5b onroad, both on full throttle like good 500 feet away and everyone around were like oooooooooooooooooooooooh, went to the scene and found just a little crack on one of three hardcase i had on and the on/off switch was squished...thats all... mt4-g3 is a beast in terms of taking a hit... nothing really happened to the 5b just minor scratches because of the tumble she took.

i have 4 packs of 2s hard case genace 5000mah roar approved 65c discharge rate, and to be honest i have short circuit them quite a few times and broke ones case aswell but they are still there doing there job. true value for the money my friend.

now thats what i call ......................................................................................oh ****....................................................................

patiently waiting on the finished product video.

ok cheers guyz...

i just installed 12 led setup on my mt4g3 , it works fine and everthing, 4 on the front with throttle and 4 on the back with brake and indicators front and back with steering when turning left and right, but i need to know if i take it out using 6s or usual 4s, do i need to use external bec or my hobbywing 150a esc's builtin bec is adequate to supply the power my mt4g3 needs? cheers, guys

or check ur tx throttle neutral settings...

u know the answers of ur problems sir, i don't put my mt4 g3 under 6s even though the tt guys recommend 6s but i do 4s with a tooth on the higher side on my pinion to satisfy my crave for speed...this way the diffs stay cool and my pocket happy... cheers.

i charge my 2 packs of 5cell 4200mah each with parallel wires on 1a and the life on the cells seems okay...

my friend welcome to mt4-g3 club, and about ballooning, try to use 100k in centre diff, this will sort out ur ballooning on the front end and some silky smooth long ass wheelies u will enjoy..my friend..

yep i m using this esc on my mt4 g3...mostly 4s but a very responsive esc indeed...cheers

okay guyz, i am using 22t pinion with 62t spur both stock on my recently purchased used f.s racing ymad 4wd 10scale truck, motor i m using is 4pole 3656 hobbywing, and 120a h-w esc sensored, was wondering if the setup seems okay especially gearing wise.,.to all u guyz... cheers...

after looking at the website scott34 sent, i think mod 0.8 or mod 0.6 is what i need...

pics for u to see brov.