nighstalker

3x ic model cars for sale i no longer use them. The orange one is for spares of repair as i have never had it running and no transmitter.. They come with spear wheels for different surfaces and gearbox oils and shock oils and starter box and some other bits. (( They do need batteries for the transmitters and the cars and glow clip for the glow plug and fuel)) will not split and no offers 1) £150 collection from Rushden Northamptonshire. can not add pictures as max size allowed is 1mb!! But happy to email them or add them to page if i can

Just saw the Bashfest did not know about this looks like fun so may go

Sounds interested thanks will keep checking this post for next time you meetup at the local place and pop along, I would also like to get some areal footage

where is your meet? moved to rushden so be good to meet up with fellow bashers for a laugh

Can get them cheaper if you go for the 2D gimbal Rcheliguru Showing not in stock but is due in this week coming, I know the owner cheap and service http://rcheliguru.co.uk/DJI-PHANTOM-VISION-phantom-2 Fast lads again will have stock this week, http://www.fast-lad.co.uk/store/product_info.php?cPath=21_645_670&products_id=27391

sold

For Sale TREX 600N Pro complete bind n fly. comes with: All as new Os50 Hyper (not even a full gallon use) Align 3GX Align 2in1 & Lipo Align DS610 servos on cyclic Align DS650 tail servo Torsion Main blades Align Tail blades Align Exhaust (some transport scratches) Flys on rails and never been crashed, rotor head upgraded to DFC.perfect condition. If you have a DX8 i can transfer the settings Pick is preferred but can post at buyers cost and would require dismantling

Bump

TTT

If you still have your heli dont give up yet mate, if your stuck drop me a message happy to help,

For sale is a GAUI GU-INS with GPS Return to home, I have used this a couple of times and removed in perfect condition with all instructions and cables never crashed. Good bit of kit and does not require a PC to setup and can be installed and up and running in minutes. Features: GAUI GU-INS supports X-type flying Quad-copter. Onboard USB interface connector for firmware updates. Interface provided to connect with standard receiver and JR satellite receiver. Easy to install and setup, no need of software on PC for adjustment. All functions can be setup & confirmed by LED lights indication. All in one design (combined inertial measurement unit and main controller) with simple cable wiring. Specifications: 1. Dimensions:Main controller: 53.5 x 38.5 x 12mm GPS antenna: 42 x 34 x 15mm Weight:Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable) 2. Frequency: 400Hz output to ESC 3. Operating temperature: -20~80

SFS Price drop

Hi All I have hpi Mt2 .15 engine for sale, I dont know the history of this car and i brought it on a wim but i enjoy my 1/8th more, Iv cleaned it and had the engine running in the garden and checked the radio gear. It comes with a 27mhz radio gear but needs RX batteries, and both servos work fine with glow clip and charger and charger for starter battery and a small tub of spares It would be a great basher for anyone. The starter motor did work till the switch failed but i have tested the motor and it works fine just needs a new push switch from Maplins will be fine

Depends what your looking for but might be worth becoming a member of Rcheliaddicts they have a good sale/wanted/swap pages, also BMFA ads http://www.rcheliaddict.co.uk/forums.php

You cant change the RX on them you can only use there provided TX

Old trick used to be is take the head off and try screwing the glow plug in from the other side, sometimes this might straighten the thread out enough to work,

I brought the ERGAL mounts that are lower, had to take the pull start box off and put a standard back plate on, now works perfect on the starter box, starts every time, If you need help with locating parts give me a shout i try find the shop I brought my parts from

That was a 450 size heli, and the plank pilot did call "low pass" at 1:08 so the heli guy should have moved, it is a big shame so see any plane go in because of someone else`s actions

I might be free sunday will let you know friday mate

If your a keen modeller you should have millions of tiny screws lol

ok i might be able to do either sat or sunday lol

Just drill a very small hole on the part left inside don't go in to far, then drill hole all the way through on the part that come off and the put a small screw through the bit that come off then into the main part, will be very easy to do

Im on the south coast this weekend but might be free to meet next sunday?

Depends how bad it is you could get some Autosol very good stuff get from Halfords http://www.qpaints.co.uk/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/A/u/Autosol-Chrome-Polish-and-Metal-Polish.jpg