Rcjim11

Ok thanks, what diameter are stock self tappers? How did you mod the gearbox lip? cheers

Just did the diff oil in front and rear, and when reassembling managed to strip the screws that secure the front assy to the chassis. The screws seem to have made a new thread - fracturing the inside of the diff case! Where can these screws be obtained? Cheers Jim

I'm currently sorting out the differentials in my truggy flux... What is the best method of cleaning grease off? Cheers Jim

Hi, Where do the droop screws locate? Cheers

Probs the Hobbywing one from GS

You can change the lvc and other cool brake thingies with the nifty little program card that md69 recommends!

You can make or buy a conversion piece from deans to 4mm bullet red connectors. I use 2x2s 45C and 65C. I can't tell the difference between those two But it may be a different story comparing 20C and 45C.

Great Thanks!

So, what parameters does it have for setting up the brake?

My flux has an extremely hard brake, (ie. from half to dead stop with the slightest touch of the brake) is this what the esc is preset as from the factory? Without releasing the button, it goes straight from braking to reverse... is this right also? Help much appreciated! Cheers Jim

The Led light that is supposed to flash when programming the esc in the manual. Just making it clearer! Thanks again Jim

I just tried plugging in the battery to the car and no led lights were present. Where do they originate from please??????? Cheers

Gear mesh need setting up? Cheers