racespecs

Hi All, selling my Sworkz Be1 EU Edition just been rebuilt with 773 oils and 450 all round in shocks. Fitted with Mugen shocks comes with spare set of Hong nor shocks. Optional bracket to fit Esc further back battery trays designed to lay down. Comes with 2 shells and enough parts to build another car any questions feel free. Looking to sell quickly can post or collection from Derby. Price: £150 P+P £10 Collection: Free

All the best guys!

The RC10TC6.2 Factory Team kit builds on the very successful R.O.A.R. and B.R.C.A. national championship-winning TC6 platform and adds many performance-enhancing upgrades which take the chassis to the next level of performance. New for the TC6.2 is the updated bulkhead, top plate, and chassis configuration that allow flex to be optimized by disconnecting the drivetrain bulkheads and suspension mounting systems. This new arrangement allows a predictable flex through the entire length of chassis, giving maximum grip on any track surface. At only 88mm wide and 2.25mm thick, the new TC6.2 carbon fiber chassis remains very narrow, resulting in reduced drag during the hardest cornering. The independent arm mount system features interchangeable toe inserts and pivot ball joints, allowing the racer to dial-in the suspension on an even more granular level. Optimized ballstud positions are connected with eyelet ball cups and blue titanium turnbuckles, adding up to an easier-to-tune platform with even more precise suspension adjustments than before. The TC6.2 incorporates a new floating servo mount that not only improves steering control but also offers an increased area for mounting the ESC and receiver. The floating servo ties directly into a new dual bellcrank steering system with optimized Ackermann and steering speed. The TC6.2 retains the H.D.R.C. (High Definition Roll Control) system. Roll stiffness is controlled and adjusted by the two wires that mount into the sides of an aluminum center member and link to the suspension arms. The aluminum center member rolls on a bearing surface to reduce friction and provides ultra-precise movement. Link: RC4ME

The RC10, the most classic design in R/C history has been reintroduced to the public and available options parts are in high demand. JConcepts is spot on with the release of the new vehicle with a Carbon Fiber option for the front shock tower. The stock vehicle comes standard with a fiberglass unit which carries all the original geometry; however, it lacks the pizzazz, strength and appearance that Carbon Fiber can provide. The new shock tower maintains the classic geometry but includes detailed reinforced areas adding strength in key areas as well as the improvement in material creates a more rigid feel, increasing the response in the front-end. Replace the fiberglass and go with authentic 2.5mm Carbon Fiber by JConcepts. Link: RC4ME

This is a Yeah Racing Aluminum Conversion Kit For Tamiya TT02. This kit consists everything you need to upgrade your TT02 and unleash its full potential! Despite the stock Tamiya TT02 use an extensive amount of plastic parts, Yeah Racing has found that the TT02 is actually a touring kit that has heaps of potential to offer. Yeah Racing exquisitely use the premium quality of material coupled with precise CNC cutting to manufacture all the parts in the conversion kit. The result is an astonishing performance and durability upgrade due to the minimum friction and flex between moving parts and joints. A Premium grade of bearings is also included to replace all the plastic bearings on the stock TT02 for exceptional driving smoothness and power efficiency. Link: RC4ME

Since its introduction as Team Durango

The new Avenger E-body is a more cab-forward design, which has improved steering, downforce and jump feel, compared to the very popular original E-Cobra body. The steeper frontal section will give more steering, the cuts across the roof will add to straightline stability and cornering, and the smooth rear section behind the cab, will lead the airflow better to the low Serpent rear wing. The body is made from high quality and very clear 1mm light polycarbonate, has a protective foil on the outside to avoid damage in transport, comes with white masking sheet for the windows, and very clear cutting lines. Semi-painted and fully painted and precut bodies in above scheme will become available soon too. 600664 Body 1/8 buggy E-Avenger clear 170317 Body 1/8 buggy E-Avenger semipainted 170318 Body 1/8 buggy E-Avenger orange 170319 Body 1/8 buggy E-Avenger red 170320 Body 1/8 buggy E-Avenger blue 170321 Body 1/8 buggy E-Avenger green Link: RC4ME

LRP releases new high-value option parts for your LRP S10 Twister Buggy, Truggy and Short Course. These ultra lightweight parts are machined from carbon fibre material (CFC). The LRP S10 Twister option parts significantly increase the stability of the car

Precision machined titanium front axle set for the RB6. Nearly as strong as steel but almost half the weight! Uses the stock RB6 spacer set. Link: RC4ME

Back in May we showed you a video of a 1/3rd scale rc truck

JConcepts, Finnishing off the C4.2, debuts new body design for Centro conversion. The JConcepts design team has spent many hours in development with leading team drivers to develop a hot, new style body, specifically for the latest mid-motor 2wd buggy vehicles. The Finnisher for the C4.2 is a completely tightened design, slimming the overall look of the popular conversion kit for the Team Associated B4.2 vehicle. JConcepts knows 1/10th off-road, and coming off the recent success of the Finnisher bodies, the designers adapted elements from the current fleet to create the ultimate high-grip mid-motor body design. Link: RC4ME

Carbon fiber esc tray for the B4.2 and similar. Made in the USA of premium carbon fiber for lightness and durability. Large enough to securely mount larger esc

M.E.D.T. RC Tire Changer Easy to remove and insert for 1/10 RC cars wheels/tires. Supports all RC cars tire 1/10 1.9 standard size and 2.2 size RC Tires. The tire changer is made of high grade aluminum with anodize color finished. Uniquely styled and high quality the spindle made from solid brass for long life performance. www.youtube.com/embed/zq3b-oxXiV0 Special design with light weight and easy to removeable and setup. The remove plate is free from the spindle during perform, as its will not make any scratches on the wheel rims RC Tires changer. This product will be relaesed on 25 October 2013 Available in 3 colors red, black and chrome and has a Net weight of 340g. Link: RC4ME

RPM front A-arms for the Associated ProLite 4

XRAY precision-molded spur gear. Molded from the all-new special lightweight and extra-strong graphite material which gives the gears an optimum balance of hardness, toughness, and flexibility to provide long life, minimal wear, and minimizing breakage or teeth stripping. The graphite gears are also lighter which results in increased drivetrain efficiency. The spur gear was strategically lightened to reduce rotating mass. The special material will withstand even the most extreme racing conditions which impart high tension on the spur gears. A