[Nitro Engine Factory Needle Settings List]

Any one know the Sh .25 p5 factory Lsn setting?

its the engine with my hong nor x1x-cr

[X1XCR SH 25 BREAK IN HELP]

hi guys,

just a quick update.

ran tank 5 at half throttle.

tank 6 at 3/4 throttle

then tank 7 touching wot for 2 secs at a time

tank 8 i ran at 3 second bursts of wot

i think im done

but sounds silly.

how will i know when its broke in ??

[X1XCR SH 25 BREAK IN HELP]

excellent cheers guys :-)

al start off tank 5 to 1/2 throttle

tank 6 to 3/4

tank 7 to 1/4,1/2, 3/4

then tank 8 to full throttle

then the joys of tuning :-)

the fuel and smoke are still flying out of the exhaust so its running very rich :-)

had to reset the hsn , factory was set to 2, 1/2 turns. so i reset it to 3 turns

[X1XCR SH 25 BREAK IN HELP]

hi folks started breaking in my x1xcr buggy in yesterday

wondering if i am doing this right?

any help would be appreciated.

HSN 3 turns out

LSN 3 turns out

idle : 1mm

Yesterday

1. heat the engine up to 60 degrees c with a hair dryer then ran tank 1 at idle and temp never went above 70 degrees c
   
2. let it cool at BDC
   
3. ran tank 2 at 0-1/4 throttle watching the temp it never went above 90 degrees c , had to turn the Lsn is 1/8th of a turn clockwise as it was cutting out when touching the throttle. tested at end of tank by pinching the fuel line and the engine revs went up a little then cut off.
   
4. let it cool at BDC and put some after run oil in.
   

Today

1. ran tank 3 let the engine heat up then ran at 0-1/4 throttle and the temp went up to 110 degrees c.
   
2. let it cool at BDC.
   
3. ran tank 4 ran at 0-1/2 throttle and kept the temp up at 90-110 degrees degrees c
   
4. let it cool at BDC and put some after run oil in.
   

had to head home because of the rain :-(

when i come off the throttle the temp drops down slowly ..

am i on the right track?

[Show us your Buggy!]

Heres my new hong nor x1x-cr :-)

[Beginners FAQ]

ave always just stuck with os.8 glow plugs mate.

a stay in cold & wet scotland tho lol

[hyper 7 .28 or x1x-cr ?]

[Nitro Engine Factory Needle Settings List]

Deleted Sussed it found the break in guide hidden in the box Doh

sh21 - Sh28 hsn is 3 turns out from closed..

got the sh21-sh28 break in guide with my x1xcr and its got a sh25 engine.

could send it to you if you want mate.

[hyper 7 .28 or x1x-cr ?]

after breaking it in

defo

got a venom temp monitor so that i can do the break in and tuning to perfection :-)

got 2 days off this week so thinkin il be breaking it in then. prob just use the old school method.. any views on break in ?

[hyper 7 .28 or x1x-cr ?]

its defo the same as mine.

Tho the one i got from modelsport came with the 2.4Ghz digital radio gear and a load of modelsport/msuk-forum decals

Not sure if the one on jespares is an older model or not

should contact jespares

[Hong Nor x1x-cr failsafe?]

tested the radio gear and it has a failsafe built in :-)

[hyper 7 .28 or x1x-cr ?]

just now in scotland its raining 24/7 and its about 5 degrees .

soon as the dry weather returns am hitting the local motocross track with it for some serious bashing ..

[X1X CRT RTR - BIts in the box?]

excellent cheers Bez

[hyper 7 .28 or x1x-cr ?]

Excellent advice folks . it arrived and boy am over the moon, its already hopped up compared to what my savage was like ,

most parts are aluminium :-)

plus it came with 2.4Ghz radio gear with in built failsafe

heres a pic :-)

[X1X CRT RTR - BIts in the box?]

any ideas what these parts are. i took 2 pics , 1 zoomed in on the 3 bags.

from what i can see. the top left bag is spare servo parts and the top right bag is spare screws. its just the other bag i cant figure out what its for.

cheers guys

[X1X CRT RTR - BIts in the box?]

my hong nor x1x-cr was the same, just had to drill 2 holes on the wing. I defo think they are just spares but the crt could be different.

ill post some pics of the parts a received later when i get home to see if they are the same....

[Hong Nor x1x-cr failsafe?]

cool cheers buddy just realised it has no glow plug with it :-(

looks like a drive to my local hobby store in the morning

[Hong Nor x1x-cr failsafe?]

Hi guys ,

got my x1x-cr and noticed its a 2.4ghz receiver and transmitter.

i purchased a failsafe with the buggy but will i need to install this or will it not be needed as its 2.4Ghz radio gear??

[hyper 7 .28 or x1x-cr ?]

[hyper 7 .28 or x1x-cr ?]

thanks for all the help guys just ordered a blue hong nor x1x-cr from modelsport :-)

ill post some pics one it arrives :-)

[hyper 7 .28 or x1x-cr ?]

Turned this into a poll folks..

[hyper 7 .28 or x1x-cr ?]

ahh cool a checked jespares and most parts were for the x1x-crt

many thanks for the links buddy.

a sound like a proper noob but been out of rc for 10 years lol

[hyper 7 .28 or x1x-cr ?]

Hong nor to me seems a better car .. just looking for web sites for upgrades and spare parts.

any websites would be appreciated.

just been stung in the past with buying an rc car then cant get parts for it..

[hyper 7 .28 or x1x-cr ?]

kl no probs spoke to modelsport he advised to go with the hobao for parts availability etc...

what uk web sites are good for x1x-cr parts ? had a look on jespares and it seems to be x1x-crt parts ...

[hyper 7 .28 or x1x-cr ?]

Modelsport have the tq 2012 model is this the same as the pic above????????

If you get the Hyper you will be better off waiting a little while, the new upgraded version is out in January: