Ruhel

PM'd

Truthfully the only way unless you convert a few to the dark side.

I know what you mean. A couple of time people have approached me in the park just to talk about the car but one time when I was with my missis and kids 4 quite big lads approached me and one just asked me to hand over the controller. Just looked at him till 3 of them got uneasy and walked off. Then the 4th on left too. Went home to change my pants after that. But they still not gonna stop me having fun. Just keep a few friends on speed dial now just in case.

Bump

Bump

They shouldn't have cosmetic damage on them as far as I know. Mainly people that have returned their phones within the cancellation period or faults had developed. Thats what the 3 CS told me when I enquired about a refurbished phone bout 2 years ago.

Bought and payed for! Thanks for the bump. I completely forgot

Very good. But why are they chasing it?

Ha ha

+1

Yeah I spent a good deal of time searching but it seems admiral muliticar was the cheapest by far. Nearly

I have one spare with brand new rebuild kit. Will let it go for the right price

Why are bullets better than deans? Higher contact area? Less resistance? Cheers

Use 2 servos with a Y splitter from the throttle channel on the RX. Easiest way IMO

Just realised also that you are still using the Ansmann 3065kv Brushless Motor. Them motors have a tendency to just pull massive current for no apparent reason blowing the ESC's sky high. I went through 2 an while testing my LHS went through another 2 very expensive ESC's. Just a warning to keep an eye on it. Think I might have said before and recommended the CC2200kv which is a beast.

The amps will slowly go down as the lipo charges. Also the balance plug should just plug into a slot on the side? Or you might have a balance board that you plug into the charger and the lipo to the board Going by this you have the correct ports on the side.

That's a 2 cell lipo so set to that in the charger. Then set to balance charge and plug white connector to the charger. Also the main batter charge cable needs to be connected via supplied cable to charger. Red from charger to positive and black to negative. The charge rate stops at 5amps because your charger can't go higher. No problem just a bit slower

Don't know regarding price but bald tyres are prob from running car on Tarmac. Edit: Guess.

I'll second that. My force 28 clutchbell screw came loose and pretty much mashed the clutch teeth and the spur. Both were metal hardened.

I use deans on everything. From my brushed Tamiya BlackFoot to my Kryptonite V2 with MMM and CC2200kv motor. 11.1v 6amp lipo. Full throttle runs and nothing gets warm. Not even the wires.

I'm sure you've read it but here is a link to Monster Max setting guide by SuicideNeil http://robotwars.00server.com/newcastlelink.html

Got my punch set at 50%. The higher it is the more gentle the acceleration from quick full throttle. My lipo cutoff is set to 3.5v. Will post other setting when I can load them on my computer.

IMO I would strip it down and repair it. You'll make it your own then, instead on some RTR rc. Alot of it does sound like minor probs. Post some pics of the condition of the rc if you can.

All the reviews I've read and watched talk about how far the range is but I've never had this. The failsafe keeps kicking in when it's approx 100m away. But like I said before I was using some panasinic batteries that only cost 99p so will see how it goes tomorrow.