gary.mck

would this resolve my issues? https://www.modelsport.co.uk/absima-sr2s-2-channel-2-4ghz-radio-control-system-stick-radio/rc-car-products/407387 providing the stock steering servo and trackstar brushless motor connections will work this this receiver? cheers Gaz

Hi Sorry to bump this old thread but i've just dug out the mini inferno and i'm looking to finally finish off the conversion 🙂 i just need a 2 channel 27MHZ receiver that will accept the connection from the stock steering servo and the new one i got as part of the Trackstar 1/18 scale brushless power system https://hobbyking.com/en_us/trackstar-1-18th-scale-14t-brushless-power-system-4300kv.html Cheers Gaz

Is that £50 for the lot? Sent from my SM-G935F using Tapatalk

Sold please close thank you Sent from my SM-G935F using Tapatalk

Bump Sent from my SM-G935F using Tapatalk

Bump Sent from my SM-G935F using Tapatalk

There you go mate. I know very weird, everything I've had before had at least 2 channels. Which is why I was confused ? Sent from my SM-G935F using Tapatalk

sorry, i mean i think i need a new receiver, as it's only got space for 1 channel from the looks of it.

Hi, I think I've found the issue... The tx rx that was originally fitted was kyosho ra-11 so I'll need to get a new tx and rx won't I to be able to connect this up? Sent from my SM-G935F using Tapatalk

nice one thanks for getting back to me about this completely lost track of this so i'll pick it up tonight and see if i can get it sorted thank you

Hi I've got a F1 2015 Steam key that obviously hasn't been redeemed, i bought it from Amazon, but not long after got an xbox one with F1 2015, so i don't need the pc version. Open To Offers. The code will be emailed through as soon as the payment is received. ta Gaz

I think I need a new servo but the guys at hobbyking said everything I had is all I'd need... any ideas?

ok I've got the battery connected ???? when I turn the car on it makes a space Invaders sound, followed by two beeps but then the led just keeps flashing

hi I've just bought the trackstar 6100kv kit from hobbyking, I've removed the old motor and fitted the brushless, I'm a bit confused with the wiring though. how do I connect the lipo? the old battery connector went into a little black block, so I took that off and put the red and black wires from the esc into this proper confused and the instructions that came with the motor are pants please help before I end up blowing the car up ????

I'm after a replacement air filter for my ancient 1/10 scale kyosho. preferably pre run in so I don't have to set it all up. cheers gaz

Hi would the following be all i need then to get my inferno sorted?

so that one from hobbyking should be fine?

would this work better with the inferno? http://www.msuk-forum.co.uk/topic/197129-losi-mini-8ight-t-motor-and-esc-free-battery-and-charger/

will all that fit within the inferno? would that battery pack be better than the stock one with the inferno? also is the motor a 380?

Hi, i'm after a brushless motor, ESC and lipo that's compatible with the mini inferno 1/18. i've seen the bundle on hobbeyking but going off what i've read on here the esc would melt under load from the motor..so ideally i'm after something that isn't going to turn my kyosho into a puddle of plastic cheers gaz

not the best start for me thinking "i'll find everything myself" they do a combi-pack 7.5t but i searched here and saw that they put a motor in with an esc that can't actually handle it. ***EDIT*** this is the bit that i mentioned above about the motor & esc not being compatible in the bundle they offer: ESC Specification: Cont. Current: 18A Burst Current: 25A Car Size: 1/18th Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX L-BEC: 5V / 1A Output Motor Type: Sensorless Brushless Size: 30 x 26.1 x 13.8mm Weight: 26g (Including wires) Motor Plugs: 3.5mm Bullet type Battery Plug: Required On/Off Switch: Yes Reverse: Yes Motor Specifications: Turns: 7.5T KV value: 6100KV Poles: 4 Diameter: 21.5mm Motor length: 37mm Extend shaft diameter: 2mm Length of extend shaft: 11

Hi, I've just picked up a mini inferno, i'm wondering if all i need to get it running faster as brushless would be the following: Motor: http://www.hobbyking.co.uk/hobbyking/store/__15184__S2030_6570_Brushless_Inrunner_6560kv_7T_.html ESC: http://www.hobbyking.co.uk/hobbyking/store/__28715__Turnigy_TrackStar_25A_1_18th_Scale_Brushless_Car_ESC_UK_Warehouse_.html Lipo: http://www.hobbyking.co.uk/hobbyking/store/uh_viewItem.asp?idProduct=20998 Any help/advice is greatly appreciated, thank you

*sold to moi*

sounds good to me mate

would you take