m0th

Hi everyone, I've just found my micro-t after not seeing it kicking about for a year or 2 and i need a new power switch for it that will fit in the chassis slot, anyone know where i can get one? cheers. Wayne

couple of flat fields. there used to be a bmx track in howden but i'm not certain if it's still there. there's a half decent bmx track in tow law but it'll probably be heaving.

i dusted my revo off at the weekend and it starts and moves. will probably be taking it out somewhere in or around crook next weekend if anyone would like to join me? can't really go further afield as i don't drive. m0th.

i was looking at that last night. i meant to do a bit of research and find out if parts from the new petrol model were interchangeable. i like the idea of a forward only, in fact i'm sure that's the reason my tranny was out in the first place. cheers mate.

anyone got a spare transmission? like basically everything including the slipper assembly. i've just had a look at my trucks for the first time since moving and it ain't there. devastated.

bump

bump

hi, just listed these. thought i'd share them here Hobao Hyper 8 - Argus Engine, SMD Evo Box, Savox 1256tg Steering + Extras - http://www.ebay.co.uk/itm/281318922509?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Hobao Hyper 7 - Novarossi Engine, RB Exhaust, Starter Box, Carrycase - http://www.ebay.co.uk/itm/281318882302?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Traxxas Trx 3.3 Engine + Carb - Never Started - http://www.ebay.co.uk/itm/281318865717?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

not yet, it turned out to be unrelated to the crunching noise. i've got a spare tranny kicking about that i put a forward only conversion in ages ago i'm going to put that in tomorrow once i sort a few problems out with it, then i'll have a look at the other tranny.

anyone put a forward only in their truck? i've got a tranny that i put one in ages ago but it got shelved because it doesn't turn smoothly when everything's in place. well, it turns it just has a bit of resistance unlike the stock tranny that i think i've just stripped a gear in i still have the 4 shims that came with it but i have no idea where to put them. individually all of the shafts and gears spin as they should but when i put them all in it's not fluid. has anyone else had this problem or know how i can fix it? cheers m0th

i think the grub screw that holds the front centre shaft on to the transmission was loose. i screwed it back in and it literally went all the way through. taking the transmission out now to see what the craic is? m0th

hi guys, well i've just decided to get all my rc's running again after the winter and i decided to start with my lst2, got it going after about a minute which was a good sign. got it tuned and had it flying about in no time but then disaster struck after i stuck it in reverse and then back in forwards. it's making a crunching noise when i accelerate. i'm not sure from where as it doesn't do it when the wheels are off the ground. i've checked the spurs and there are no missing teeth, it doesn't do it when i roll it and the wheels are spinning freely nor when i pin the wheels and try and roll it/turn the spurs. any help would be appreciated as i don't really know where to start looking. m0th

doesn't the traxxas big block mount fit the picco 26 max? they're cheap if you order from america. i'm sure i read somewhere that it gives you a little more clearance between the spur and the air filter. i was thinking about ordering one myself to see if i could use my motorsaver with my picco. i'd do that or stick with the original, once you suss it it's not too bad. m0th

i don't think so dude.

bin the 3.3 and get the picco banged in. you'll want to be ordering a 17t clutch bell and a 36t spur gear next and then you will never go back to a traxxas engine ever