Jump to content

bbadger

Members
  • Posts

    793
  • Joined

  • Last visited

Everything posted by bbadger

  1. bbadger

    bearings

    +1 --- Bearings should last, as long as they are lubricated and not being subjected to a load other than what they are designed for.
  2. WOW, I was thinking I was getting to many with 7 cars, 2 Heli's and a Boat....... EDIT - Bugger forgot one of the cars == make that 8 2 1
  3. Found out that loosing a rear dogbone can be painful......... If it hits you in the face!
  4. How often do you have "bash" meets?
  5. +1 easy to carry around, and just poke it in the top of the engine to get the temp..
  6. you could use the lead, but you will need to put resistors in to the circuit with led's, as even the extra bright ones tend to be a max of 3.6v
  7. Looks to me like the servo is too far away from the axle, the steering linkage is loosing a lot of the travel moving backwards and forwards instead of left and right - hence less steering
  8. Cheers Guys, Looks like I am going to have to strip the motor, the drive mechanism on the car all moves freely with no tight spots, so it is definatly the motor. I will strip it later (and clean with some switch cleaner)
  9. i have blown it through with some wd40, and then spun it up - no differance. I did remove it from the car, and it still needs a nudge to start turning, might give it a go with some GT5 later. Thanks though, Suppose the next step is to "carefully" open it up and check it is clean. It must be said, for a rally car the motor is not in the best place, I think I will need to build a sheild for it, as it is open to the underside of the car. there is plenty of space in the shell for airflow so should not overheat.
  10. I have recently obtained a new Carisma M40s with the audi quattro body. I have used it about 5 times and a problem has occured. The motor will not start without a slight nudge. Tapping the can also makes it start. At first I thought it may have been the esc, but even the slightest tap sets the motor running at even low revs, and as log as it does not stop it responds to any changes in throttle as I would expect. Any ideas?
  11. I knew this year was going to be good for Rally cars!!! Looks Like I have something else for the wish list now.
  12. hopefully I will be able to make on day of the two, have to work at some point over easter.
  13. You can have mine, as long as you promise not to return her.....
  14. I put "zip" ties on the body pins so they are easier to handle. I use velcro strips as Cable ties though as they are easier to undo to move cables around.......
  15. http://www.scriptasylum.com/rc_speed/oil_mixer.html Any use? You can mix oils to get differant thickness' from the stock ones you can buy.
  16. Hey all. If this becomes a regular bash I will make the effort to get there - 30 miles for me, so want it to be worthwhile.
  17. Nice Vid. Hopefully I will be able to get to a snetterton bash in the not to distant future, although I will have to race this....
  18. Bugger all in the manual, just about manges to tell you how to set up the esc, with a few errors in translation.
  19. I have been looking at that, however there is no way to attach them, but the smaller one is the right size. So definitely no left filangi... which could be a disaster if I ever get to make a re-make of Friends.... It is however a doodar, for the whatamacalllit
  20. Does not realy work as a stand, especially as one of them has an angled bottom/top... Think I may e-mail the manufacturer and see if i get a response.
  21. Ah, the serious and informed answers I was hoping for..... :whistling: bugging me now, they must have some use.
  22. Just got the Carisma Audi Quattro, as I fancied a rally car. Comes with a number of extra bits and pieces, like Plastic disks for making a course. Also in a separate plastic bag was this... I am stumped as to what it is, Initially I thought it could be a 2 part stand, or possiby some form of cover for internals. It seems to be 2 seperat things, as there is a mould line down the middle that looks as if you are supposed to seperate the 2 shapes... am I missing something obvious? They went to the trouble of bagging it and including it, so it must have some use...
  23. Just got this - always wanted a Quattro like this when I was a kid, finally got one..... will sort some of my other cars soon
×
×
  • Create New...