ASF72

Limited Edition Hot Bodies D8 Hara, big spec RC car ready to race, big upgrades inc hub mod, front and rear aluminium supports, centre drive shafts mods to keep them from jumping out, RB WS7 III .21 Race engine with matching RB 2045 race exhaust, nitro fuel cooler.. probably forgot loads as I built this and never really ran it, the engine has been run in but not really used, also fitted is Spektrum DS3S with spare sensors in the box which I never fitted.. I also had the body shells painted professionally by Jon Miller, there is one fitted and a brand new spare still with outer coating on, all the race modifications were done by Graham Alsop aka "sloppy" who raced these cars professionally and still is a works driver for hot bodies. If you're ready to race this is the car to do it with. £350 Sent from my SM-G950F using Tapatalk

Dremel out with a sanding disc on, make it fit!!!! had to do this on nearly every shell ive had.

I would like to sell it TBH but i would need quite alot for it as its hopped up to the nines with mega engine, servos and radio gear....Interested????? Spare shell an all.

Its been a while since i was on here but...look...Boom!!!! Its still nearly as clean, just the rear shocker whats dirty from the exhaust and engine still needs a good run really, its had its run in procedure but thats about it(RB WS7 III now not the engine whats in the pictures, thought id treat it) Nino

Are you talking about running water/meth injection??? I would run higher boost but I'm a little worried about the con rods......... There standard see lol, when I built the engine con rods where like a million quid to buy not like these days where they can be had for around a grand, it has forged pistons but the rods are only supposed to take approx 400bhp, I'm over that see, bit of a time bomb lol.

Only a small one, it was when i had a few erratic boost problems due to the external wastegate, it was recalled and fixed so since this vid its had a straighter exhaust in the middle of the car and a bigger screamer pipe which is bigger than some exhausts, basically alot quicker now.............. here's the short vid, turn up the volume!!!!!!!!!!!

Ive been waiting for that quote....lol 105bhp.......yes...........PER CYLINDER!!!!!!!!!!!!!!!!!!! So 105 X 4 = 420bhp @ only 1.55bar of boost.

Has your ST just got plastic shock towers at the minute?????? i think yours are built into the gearbox casings but long time since ive really had a good look. Also Pro chassis have milled out parts on them .

This is mine with RB WS7III engine ace servos and some tricky chassis, has full pro bits and more.

It's not really been used since I built it, still sat in my garage on the starter box, new engine has not seen that much work other than sat on tick over to run in a bit.

Here's mine, had an engine change to brand new Rbws7 III, king headz bits and custom drive shaft mods

Err just slightly, its a bit like the wife...... High maintenance lol

Little ickle turbo sat on a bunch of bananas lol

Here are some of my little brum brum All 105bhp of her lol

Hi Guys, Since building my D8 Hara ive not used it, may have run it up and down my drive and had it on the starter box running it in but its sat in my garage doing nothing, so thinking of selling it, it has Spektrum DS3, Ace servos and a brand new RB WS7 III and RB fuel cooler plus lots of other goodies including two John Miller Shells and SMD starter box and other upgrades, please check this thread and im sure you know whats gone into it..... http://www.msuk-foru...8-hara-edition/ Serious offers only as i dont know how much to put it on for, i will include the wheels in the pics but does have a different and better engine in now with matched tuned pipe. PM me for more details or offers please.

If you think Brillo pads is funny listen to this, someone i know is a complete maniac, he has built a VW old Caddy pick up with a VR6 Turbo engine which is now 4wd, prop shaft made from a lamp post and was in balance by 0.5grams, he is a complete nutter, if you ask him it cant be done he does it just to prove ya wrong...what im getting at is that he made his own exhaust for it which is monster 4" side exit and its the best sounding pipe i have ever heard, the silencer is packed with nappies, yes nappies.

Hotbodies D8 Hara Edition.

+2 for Group B couldn't afford an S4 so went for an 8v Integrale which is now over 400bhp with lots of modern technology put in it, scares me sensless.

I only use .21 engines in my ST pro and it fly's.

Yes i think you should...

Comes undone when heated, use to use this on golf clubs and never came loose, only way to change the shafts was to heat them then glue use to melt and shafts came out...might be an idea to try it, at least they wont come undone, lots of vibration on them 1/5th scale things. Try it onsomething what you done use, the use a soldering iron or something to see if it will undo with normal tools or small gas torch.

One word.......Araldite....lolol

One word.......Threadlock!!!!