ASF72

Limited Edition Hot Bodies D8 Hara, big spec RC car ready to race, big upgrades inc hub mod, front and rear aluminium supports, centre drive shafts mods to keep them from jumping out, RB WS7 III .21 Race engine with matching RB 2045 race exhaust, nitro fuel cooler.. probably forgot loads as I built this and never really ran it, the engine has been run in but not really used, also fitted is Spektrum DS3S with spare sensors in the box which I never fitted.. I also had the body shells painted professionally by Jon Miller, there is one fitted and a brand new spare still with outer coating on, all the race modifications were done by Graham Alsop aka "sloppy" who raced these cars professionally and still is a works driver for hot bodies. If you're ready to race this is the car to do it with. £350 Sent from my SM-G950F using Tapatalk

Dremel out with a sanding disc on, make it fit!!!! had to do this on nearly every shell ive had.

I would like to sell it TBH but i would need quite alot for it as its hopped up to the nines with mega engine, servos and radio gear....Interested????? Spare shell an all.

Its been a while since i was on here but...look...Boom!!!! Its still nearly as clean, just the rear shocker whats dirty from the exhaust and engine still needs a good run really, its had its run in procedure but thats about it(RB WS7 III now not the engine whats in the pictures, thought id treat it) Nino

Are you talking about running water/meth injection??? I would run higher boost but I'm a little worried about the con rods......... There standard see lol, when I built the engine con rods where like a million quid to buy not like these days where they can be had for around a grand, it has forged pistons but the rods are only supposed to take approx 400bhp, I'm over that see, bit of a time bomb lol.

Only a small one, it was when i had a few erratic boost problems due to the external wastegate, it was recalled and fixed so since this vid its had a straighter exhaust in the middle of the car and a bigger screamer pipe which is bigger than some exhausts, basically alot quicker now.............. here's the short vid, turn up the volume!!!!!!!!!!!

Ive been waiting for that quote....lol 105bhp.......yes...........PER CYLINDER!!!!!!!!!!!!!!!!!!! So 105 X 4 = 420bhp @ only 1.55bar of boost.

Has your ST just got plastic shock towers at the minute?????? i think yours are built into the gearbox casings but long time since ive really had a good look. Also Pro chassis have milled out parts on them .

This is mine with RB WS7III engine ace servos and some tricky chassis, has full pro bits and more.

It's not really been used since I built it, still sat in my garage on the starter box, new engine has not seen that much work other than sat on tick over to run in a bit.

Here's mine, had an engine change to brand new Rbws7 III, king headz bits and custom drive shaft mods

Err just slightly, its a bit like the wife...... High maintenance lol

Little ickle turbo sat on a bunch of bananas lol

Here are some of my little brum brum All 105bhp of her lol