CandiCane91 Posted May 21, 2016 Share Posted May 21, 2016 Well I've had to change my order again as the Hyper 7 .28 Mach is being dicountued so there's a new one now Hyper 7 TQ2 .28 Mach Turbo engine so now have a new toy to play with next week Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 21, 2016 Share Posted May 21, 2016 I could be wrong but I think you will find it is the same car and engine, the only difference is that the one you have ordered has a turbo style glow plug rather than the standard type glow plug as in the other. Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 21, 2016 Share Posted May 21, 2016 No I think your right to be honest just got a some new spec to it about it though Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 21, 2016 Share Posted May 21, 2016 I have the .21 version and am loving it!!! Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 21, 2016 Share Posted May 21, 2016 I just can't wait to finally have my car been waiting far to long now! 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted May 21, 2016 Share Posted May 21, 2016 (edited) On 20/05/2016 at 16:52, CandiCane91 said: Cant run it yet sillys got to wait to get it first ?! I have found loads of sites for parts if I break anything got that covered. But does anyone know any good sites on how to replace things when they break like guides here........u tube vids help lots Edited May 21, 2016 by evssv Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 21, 2016 Share Posted May 21, 2016 7 minutes ago, CandiCane91 said: I just can't wait to finally have my car been waiting far to long now! just take ya time bedding the engine in!! Oh and make sure the needle settings are correct from factory before it gets it first start up or you kill engine in no time!! Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 21, 2016 Share Posted May 21, 2016 I'll make sure I do everything from the manual first before doing anything Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 21, 2016 Share Posted May 21, 2016 my manual didn't say anything about the factory needles settings, just incase yours is the same I set my lsn at 3.5 turns out from closed and the hsn I set to 4 turns out from closed. Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 21, 2016 Share Posted May 21, 2016 What's lsn and Hsn? Haven't a clue! I have a lot to learn Quote Link to comment Share on other sites More sharing options...
Jumper Posted May 21, 2016 Share Posted May 21, 2016 Low speed needle and high speed needle on the card of the engine. Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 22, 2016 Share Posted May 22, 2016 I should of really guessed that. How do you know which one is which does it say? Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 22, 2016 Share Posted May 22, 2016 (edited) hopefully pic is attached to explain the hsn and lsn!!! below the high speed needle is another screw on carb body DON'T touch this as it the fuel spray bar setting and touching this if you don't know what you are doing can get you in serious trouble!! Edited May 22, 2016 by firestorm01 added info 1 Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 22, 2016 Share Posted May 22, 2016 Ok so low 3.5 turns, high 4 turns and not not touch idle speed got it Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 22, 2016 Share Posted May 22, 2016 set idle gap to 1mm as you look down into the carb air intake. Quote Link to comment Share on other sites More sharing options...
firestorm01 Posted May 22, 2016 Share Posted May 22, 2016 on your carb there are four settings: high speed needle low speed needle idle gap mid range fuel spray bar The top three (as shown in pic above) are the ONLY three you need to adjust AFTER bedding in the engine. Quote Link to comment Share on other sites More sharing options...
CandiCane91 Posted May 22, 2016 Share Posted May 22, 2016 Ok so only do all that settings once I've bedding in the engine, got it. Thanks for your help with this wouldn't of had a clue about it Quote Link to comment Share on other sites More sharing options...
AndyFergo Posted June 1, 2016 Share Posted June 1, 2016 On 5/18/2016 at 09:53, CandiCane91 said: Hi, I'm still waiting on mine to be delivered but bought the HoBao Hyper 7 .28 Mach. Can't wait to try it out as totally new to all this. Just have a question if anyone could help that runs the same what glow plugs should I get and where's best to get from? Ow and from Bristol OS P3/P4 (or the cheaper bullit p3/p4 its the same plug) have worked very well for me and Alpha glow plugs work good too, You can get them from Bolton model mart since you are new i would like to give you this link http://www.rctech.net/forum/onroad-nitro-engine-zone/295490-tuning-bible.html. I probably would have quit the hobby if i didnt find this thread. Tells you everything about breaking in/tuning and engine Quote Link to comment Share on other sites More sharing options...
AndyFergo Posted June 1, 2016 Share Posted June 1, 2016 The thing with buying a new car without doing research is not having the nerve to learn everything before going and using it. I did about 2 years old pure research before finally getting mine half a year ago and im very glad i did learn before buying. Just take a couple hours every night watching or researching tuning videos and setups. One guy i cant recommend enough is Nitro RC Nerds on youtube, He has a hyper 7 too. About servos, Dont go cheap. Just go full out best servos you can, Its better buying 2 durable servos which are expensive but last many years than getting 2 for half the price which last serveral runs, Something i learnt very recently. Quote Link to comment Share on other sites More sharing options...
Little B Posted June 9, 2016 Share Posted June 9, 2016 hi all I bought a hyper 7 a few weeks back and the engine has bit the dust on me the pin that holds to piston broke its housing and snapped the bottom part of the piston gutted but more to the point what engine would I be best putting in it at a reasonable price the one that was in it was a xtm 28. cheers Quote Link to comment Share on other sites More sharing options...
Hyper7tq Posted July 31, 2016 Share Posted July 31, 2016 (edited) I've just got a hyper 7 my first nitro I would upload a pic every time I try it says I can only upload 194 kbs or something lol and I got a clue how to change so I can upload I hate tech Edited July 31, 2016 by Hyper7tq Explaining why can't upload pic Quote Link to comment Share on other sites More sharing options...
Hyper7tq Posted July 31, 2016 Share Posted July 31, 2016 Just a quick newbie 1 for ya my car seems to be running rich throws loads of fuel out the exhaust how can this be stopped it's a hyper 7tq also I'm after a clear shell and clear wing if any body knows of any that will fit cheers Jonny from Leicester Quote Link to comment Share on other sites More sharing options...
GT1 Posted July 31, 2016 Share Posted July 31, 2016 (edited) 33 minutes ago, Hyper7tq said: Just a quick newbie 1 for ya my car seems to be running rich throws loads of fuel out the exhaust how can this be stopped it's a hyper 7tq also I'm after a clear shell and clear wing if any body knows of any that will fit cheers Jonny from Leicester As it runs in it gets a better fit, becomes more efficient and will need leaned in, following proper break in procedure of course. Edited July 31, 2016 by GT1 Quote Link to comment Share on other sites More sharing options...
Hyper7tq Posted July 31, 2016 Share Posted July 31, 2016 Just now, GT1 said: As it runs in it gets a better fit, becomes more efficient and will need leaned in, following proper break in procedure of course. I brought it second hand mate was used as a basher Quote Link to comment Share on other sites More sharing options...
GT1 Posted July 31, 2016 Share Posted July 31, 2016 Just now, Hyper7tq said: I brought it second hand mate was used as a basher It could just be the weather then(atmospheric pressure), or different fuel, plug, lines, tank etcc, there are a few variables. Mostly just the weather will require a reset. The fun of nitro. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.