capri-boy Posted November 27, 2014 Share Posted November 27, 2014 (edited) Need the space and funds so this has got to go also. FTX Vantage Pro roller, lightly used, as stock bar a velcro batt strap rather than CF retainer. If buyer prefers I can swap it back. As you can see from the pics it's in excellent condition, shell and wing are unused and ready for painting. Sat on mini pins (glued) which look to have around 90% tread. Not sure on value here, cannot find a single used one sold, there's a seller breaks new ones on the bay and sells for more than the sum of there parts new, and new its around Edited January 31, 2015 by capri-boy Link to comment Share on other sites More sharing options...
Devin Posted January 22, 2015 Share Posted January 22, 2015 how much mate Link to comment Share on other sites More sharing options...
capri-boy Posted January 22, 2015 Author Share Posted January 22, 2015 how much mate Price is in opening post - I have fitted a combo to this last week mind, although bar a test run on the street I haven't used it yet due to work. Link to comment Share on other sites More sharing options...
Devin Posted January 22, 2015 Share Posted January 22, 2015 Ahh I don't mind if you leave the combo out just interested in the roller to be honest how much do you for the roller? Link to comment Share on other sites More sharing options...
capri-boy Posted January 22, 2015 Author Share Posted January 22, 2015 (edited) Ahh I don't mind if you leave the combo out just interested in the roller to be honest how much do you for the roller? Was looking for around Edited January 22, 2015 by capri-boy Link to comment Share on other sites More sharing options...
Devin Posted January 22, 2015 Share Posted January 22, 2015 Do you have a image of the etc at all Link to comment Share on other sites More sharing options...
capri-boy Posted January 22, 2015 Author Share Posted January 22, 2015 Do you have a image of the etc at all One min. Link to comment Share on other sites More sharing options...
capri-boy Posted January 22, 2015 Author Share Posted January 22, 2015 (edited) Shell is still unpainted, I've a rtr vantage shell I used to test. Pictured rtr with spekky tx/rx and mg steering servo (think it's a Savox but can't remember without looking). Edited January 22, 2015 by capri-boy Link to comment Share on other sites More sharing options...
Devin Posted January 23, 2015 Share Posted January 23, 2015 Um see I don't use those connectors is my only issue sorry for the late reply my top talk didn't update Link to comment Share on other sites More sharing options...
capri-boy Posted January 23, 2015 Author Share Posted January 23, 2015 (edited) Um see I don't use those connectors is my only issue sorry for the late reply my top talk didn't update Ditto - been at work. I can change the esc connectors over to anything I've got no problem - you'll see I've left the esc / motor wires the stock length - it's not very tidy but this was never meant to be a long term thing - just to see if I liked 1/10 on carpet any better than my 1/14. Edited January 23, 2015 by capri-boy Link to comment Share on other sites More sharing options...
Devin Posted January 23, 2015 Share Posted January 23, 2015 Ahh okay well I run dean's connectors how much would it be altogether then 130? And how would I pay Link to comment Share on other sites More sharing options...
capri-boy Posted January 23, 2015 Author Share Posted January 23, 2015 (edited) Ahh okay well I run dean's connectors how much would it be altogether then 130? And how would I pay Paypal - just to clarify - you want the Pro roller, with esc and servo fitted - no Tx/Rx and the esc swapped over to deans? What shell do you want? The unpainted / cut one or a RTR shell? Oh if you PM me I'll see replies quicker too. Edited January 23, 2015 by capri-boy Link to comment Share on other sites More sharing options...
Devin Posted January 23, 2015 Share Posted January 23, 2015 Ahh okay what about motor? And I don't the rx etc and yeah the connectors to dean's and the clear shell and wing obviously how do I pay by PayPal I have never done it on here before haha Link to comment Share on other sites More sharing options...
capri-boy Posted January 23, 2015 Author Share Posted January 23, 2015 Sold to Devin and partial payment received - will get the esc connector swapped over tonight and hopefully post tomorrow. 1 Link to comment Share on other sites More sharing options...
capri-boy Posted January 31, 2015 Author Share Posted January 31, 2015 Full payment received, Thanks Devin. Link to comment Share on other sites More sharing options...
Recommended Posts