adefirestorm

Just to add the ESC is 120A and battery's are 4S

SOLD

Bump

I will be running my rc8.2 in electric class, the one in my avatar. There was only 5 on last race, running lecy. Hopping the weather will be nice and a bit warmer then last time.

Do you guys going for next race??? if yes I will see your there

Bump

Open to offers

No longer available

Well I got some arrowmax tips, they great nice and lot stronger then fastrax tips, when you undoing locked screw you can feel in you hand as you put tension on screw is got type of spring feel to it. No wonder I had problem with this, had to put bit heat to one side

It looks like everything in slow motion some how. I wander how they get the power to last all them laps or are the laps lot shorter?

Electric F1 cars on ITV4 right now is only highlights didn't even know they made them, it looks wrong with the whine from them motors. Anyone seen them Ade

Well if you import parts let's just say from USA anything under

Ah also the kyosho you listed they lot different car I belive, mp9 tk13 vs mp9e tki3 hence the price. Been honest is all down to individual which you get.

If you planing on racing in near future you be better of getting mugen mbx6r 2nd hand better then any of them above cars someone I know just picked one up for

Happy to help

looking on another thread core rc is part of HISKY look bit down in thread http://www.tamiyaclub.com/forum/index.php?showtopic=68976 looking at this website x-3s transmitter should work http://www.chiyuan.net/enproducts.asp?bigclass=Radio+controller

Hi I'm not clued up on this to much I would like to think that if you have FHSS receivers and any steering wheel system that run FHSS would work, have a live chat with this lot they maybe able to help http://www.hobbyking.co.uk/hobbyking/store/__24905__Turnigy_3XS_FHSS_2_4GHz_3_Channel_Radio_System.html

well after it dried it come back to life but like you said is not calibrated well 0.2v out compare to ordinary volt meter, so the rise in volts was down to moisture, is not well protected so I think I just put hot glue around the board to stop water getting in to once I get new one.

Can't help with price as 2nd hand staff varies in price if you want stick on ebay and put reserve what you think is worth if it reaches then happy days if not then this may give your indication what is worth to folks out there, to you maybe

this I have fitted http://www.hobbyking.co.uk/hobbyking/store/uh_viewItem.asp?idProduct=40906

that took long time to split the car apart, not going there until dries up a bit lol

None taken mate just split the car for cleaning and found esc wire to rx cut it looks like must have trapped under battery tray or something, also taken look at that volt meter/display thing it don't look on main board so will order new one , I think the odd glich on tthrottle is down to expose negative wire so will fix that and see what happens. Can anyone recommend on board volt display???

Hi everyone I have Led voltage Indicator/display fitted on my car, and is doing strange things, it should display the voltage as is drooping but instead it shows higher value then fully charged lipo, example 16.8 when plug fully charged lipo then few min later as the battery drops voltage the indicator shows 17.6 what could be the problem??? put normal volt meter on lipo and is showing 15.10, is not connected to receiver is wired straight to pos/neg on esc. Could be just water??? Also been getting few glitches where there was no throttle response until I let the car go to stop then start running again. Anyone can help Ade

Managed to replace my bend shock shaft, and fixed my bashing shell

The battery you listed you can o charge at 1c which means: Battery capacity 5400mah:1000= 5.4a The charger you listed is single output so only one battery at the time, also don't forget the lipo won't be flat before you charge it as you would keep in in storage mode.