harjun

wow on sale from

hi guys will these rear hubs fit the trophy http://www.hotbodiesonline.com/kit.php?lang=en&partNo=66785 just scroll down to the up close section. i reckon they will fit but will the stock trophy axle and bearings work on that hub

Very well spotted

Nothing in the clearance corner The edit ones are like

I think I downgraded in term of quality and reliability of components But this trophy does jump and handle flipping awesomely Way better than the lsp ever did

I though my old lsp2 pro was bloody way better than this trophy lol Ok so just to confirm, the rear hub carriers will fit?

BLOODY REAR RIGHT HUB IS STRESSING ME OUT!!!!! i cant source a better quality one

mate it looks like the hole on that chassis brace is too big. Been tightening it up too hard? Try stick a washer between that allen bolt and it wont pop out (bodge) or you're gonna need a new one by the looks of it

wow, very nice truggy you have there mate. Guys, ive just broken my rear hub , the bottom of it has snapped where it should join onto the rear suspension arm. Does this usually happen? On my LSP they were a purple aluminium which never broke.... not really too happy about the strength of this. Any idea where i can purchase some after market ones to replace all four ? Cheers guys.

Seems like your engine is too small for your buggy Has it ever been changed?

Your current setuP is wrong Your engine should be on engine mounts Search on google for engine mounts specific to your buggy

Those 4 silver screw you have circles... Is that how the engine is mounted on the chassis

Ok cool because I think that it may be what's the problem

Seems like it Any chance of getting some pics so we can see how the engine is mounted? Cheers

May be your clutch springs or your clutch Is engaged or jammed on

Tried leaning it out?

Normally the 14t clutch elks are all the same size so you should be fine there Does your engine sit on engine mounts and does the engine mount sit on a separate mount on the chass? Because it's pretty weird that you can't adjust the lateral position of your engine

Take the air filter off the engine Turn all of your radio gear ON Look into that hole on the engine where u removed the air filter from. There should be a shiny silver thing there, and a 1mm gap between that and the edge of the engine Now, when you hold down the throttle on your transmitter controller, does that silver shiny thing move, and that original 1pm gap get wider? If it does not... Tell us what happens Sounds like aknackered steering servo or a lean LSN

Tbh it really doesn't need much rpm to start an rc Neither does it need much torque Its only a small engine with barely any compression

No prob mate Just an idea.. In a video I once saw a guy holding some small handheld device which was essentially a spinning rubber disc Whilst the device was spinning, he made contact with the rotating disc and the flywheel, and the engine started However, the hole in your chassis which makes space for the flywheel would have to be large enough I think to occupy the spinning disc Also, it may be hard lifting up the car whist trying to unite the device with flywheel especially if it's a truggy or a truck!

wow 20k revs? thats a lot i'd imagine about 1k revs ought to do it mate.

Awesome Will do mate!

ended up getting a hpi trophy 4.6

Looks awesome but cheapest UK dealer i could find was £380 which is a bit too pricey for me Otherwise, all American places its $320 which is ~£200 Anyone know any UK dealers for this truggy? Looks very nice.