t1000

Will consider splitting if there is enough interest Truck inc esc,motor and servo and spares £220 Batteries £30 per pair Ts4g controller £30 Overlander charger inc paraboard £35 Lipo bags £5 each

Bump

At the moment I want to sell as one lot cheers!

Hi I have a Hobao Hyper MTe for sale in the classified if your interested. Im localish to you as well.

Hi Yes added had to post first as I was having problems linking them can you see them ok?

Hi Up for sale is my Hyper MTe Monster Truck. In great condition hardly used though the shell could do with replacing at some point. Spec as follows Hobbywing EZ Run 150A with programmer 2000KV Brushless Motor Savox SW 0231mg Servo Wheelie Bar Turnigy Trackstar TS4G Controller A few spares Overlander RC6 VSP Charger and Paraboard Batteries are Matched pair of Zippy 3S 30C 5000mah Matched pair of Turnighy 2S 30/40C 5000mah Two fire Lipo Bags for safe charging. Includes harness to run in batteries in parallel or serial All cells read good. This is a very fast and capable truck everybit as good as a savage imho. Collection prefered, will consider posting at cost. All ready to run. Looking for £330 ono SOLD Read less

Interesting read if you hadn't seen it http://www.competitionx.com/news-feed/review-hobao-hyper-mt-sport-plus-monster-truck/

WILDBILL69 let us know how you got on. I'm not that far from there

There is a west midlands bashing group on facebook. They regularly bash in Bilston and most own 1/5 petrols. Hopefully this link will work https://www.facebook.com/groups/641420032659480/

Has anyone seen the Louise wheels/tyres from hobbyking. They look decent value http://www.hobbyking.com/hobbyking/store/__82259__LOUISE_MT_CYCLONE_1_8_Scale_Traxxas_Style_Bead_3_8_34_Monster_Truck_SPORT_Compound_EU_Warehouse_.html

Yeah I tried a adhesive pad from Halford's that is used for mounting your rear view mirror but that failed. Tie wraps is a good idea!

I took mine for a quick bash over the local bmx track yesterday and I lost a wheel, luckily I found the nut. Im really impressed with this truck its tough as old boots, not broken a thing yet and its had a fair few crashes when my daughter has took control (honest!) Only problem Im having is getting the steering straight and keeping the ESC fixed, gonna try silicone sealant for the ESC next as d/s tape doesn't cut it.

Cheers going down this route with the connection outside the box so I can easily unplug and plug in the programmer.

Hi chaps Just a quick one, is there a way I can alter the receiver box so I can quickly access the esc lead so I can programme it quickly reason being when out with my daughter I run 3s and when with my mates want to run 5s so want to switch quickly is there an extension lead I can run so I have the connector outside the box or anything else? Cheers had a search but it's difficult to find anything. Hope that makes sense.

@mydoddy69 How you getting with your new lipos? Im looking to get some combinations like you just wondered what combo worked best. Ive found 3s too slow and 6s insane.

Cheers got it now!

Oh got mixed up I thought it was the opposite. Basically I want to run 5s on my truck I've got two 3s at the moment but 6s is a bit uncontrollable.

Hi Sorry for this newbie question but googling just beings up loads of conflicting info. So if I run 2 X 3s I get 6s I understand that if I wish to run 5s can I run a 2s and 3s together and if so do they need to be the same discharge rate?

No mate swapped for a 2000kv

I managed to go for a quick run but it wasn't very successful, when running on 3s the throttle would turn stop after running for a few minutes and then I decided to try 6s which worked fine but I think the rear diff has stripped as it had no drive then. Oh well strip down required!

Bump

Hi I have this for sale

Hi up for sale this motor good condition and fully working. £25.00 plus post

Pmd you Capri-boy

Ok, Here are some pics. standard apart from my dodgy diy chassis brace made from a U section of Ali i had lying around also did the slop removal as per your great you tube video. Took picture of the small motor, can you recommend a reasonable motor to run for reasonable money?