GYU HOBBY RC

HiIt's been a while since I bashed the HPI SAVAGE FLUX XL.A powerful bash to live up to its reputation.

AXIAL SCX10 III JEEP WRANGLER RUBICON JLU This is a video of high-speed driving and low-speed driving. I hope you enjoy your hobbies. Tansmitter and receiver : FlySky FS-GT5 2.4G 6CH Servo : DS3230-180 6.8V 34.5Kg / 0.2Sec ESC : Hobbywing QuicRun WP 1080 Crawler Brushed ESC Motor : Holmes Hobbies TrailMaster SPORT 550 27T Brushed Motor Micro servo : SPMSSX107 SX107 Micro Metal Gear Servo 6.0V / 3Kg / 0.08Sec X2 Battery : DXF 6750mah 100c 3s

Hi.~~ ARRMA KRATON EXB 6S.!!! Just ran... The clothes were full of dust.

Hi TAMIYA MONSTER BEETLE Bashing Sand storm... Cute.

XMAXX MAX6 + 5687 1100kv upgrade bashing.!!!It's an upgraded huge power.good.!!!!! 👍️ https://youtu.be/vNcQTPkThe4

Hello. X-Max I did a sandstorm driving in a wide area. There was a lot of sand and dust, but the stress was relieved and it felt good. Traxxas X-Maxx 8s ESC : Hobbywing EzRun MAX6 Motor : Hobbywing EzRun 4985 SL 1650KV brushless motor Servo : POWER HD WH 65KG Digital Servo Metal Gear Tire : Pro-Line Racing Badlands MX43 Battery : DXF 8400mah 120c 4s X 2 Body : Pro-Line Racing Pre-Cut Brute Bash Armor Body (White) Gear : 20/50 Spring : Pro-Line Racing Dual Rate Spring Assortment Motor mount : JH Racing CNC aluminum alloy motor fixing bracket Tie Rod : NEW ENRON Aluminum 46MM Servo Steering Linkage Tie Rod - PART - RPM 80662 Oversized Front Axle Carriers RPM 81732 Oversized Rear Axle Carriers

Hello X-Maxx gravel or frequent jumping often causes bearing failure. Lately I've been having frequent bearing problems on the front wheels. So, I'm going to try and upgrade the front wheel bearings. Larger than conventional bearings. Durability is three times that of conventional bearings. - PART - RPM 80662 Oversized Front Axle Carriers

It is a jumping video with a slow screen. That's great.

Hello. Arrma Big rock 4S Freestyle Bash On a hot day, the ESC overheats. I'll have to play with it slowly. Arrma Big rock crew cab V3 -Part upgrade- ESC : Hobbywing EZRUN MAX10 SCT 120A Motor : Hobbywing EZRUN 3660SL G2 Brushless motor 3200KV Tire : Pro-Line Racing Trencher HP 2.8" All Terrain BELTED Truck Tires Mounted, AP6336 6x30 to 17mm Hex Adapters Battery : DXF 8400mah 120c 4s Gear : 32DP Motor Pinions Gear for 5mm shaft - 15T Shock : GPM Aluminum rear heavy-duty adjustable damper (front 102MM, rear 115MM) Whee Nuts : Aluminum Wheel hubs 17mm Hex Nuts

We call it Mad Dog Savage Flux XL BMX Freestyle Bash The taste is also exhilarating. HPI Savage Flux XL ESC : EZRUN MAX8-V3 150A Motor : EzRun 4274-2200KV Battery : DXF 6750mah 100c 3s X2 Tire : Badlands MX38 3.8" All Terrain Tires Mounted (10127-10) Servo : BLS-HV7146MG JX Waterproof Body : Ram 1500 clear body (3427-00) Drivetrain : Center differential apply

Arrma kraton extreme bash (EXB) 6s ESC : EzRun MAX8-V3 150A Motor : EzRun 4274-2200KV Battery : Varcs 7000mah 140c 3s X2 Servo : Power HD D-25V2 Torque(6.0V): 20.0 kg-cm Tansmitter and receiver : FlySky FS-GT5 2.4G 6CH Option Parts : Hot Racing Aluminum Wing Mount (Black)

Hello. I did a power drive in the valley to keep you cool in the hot summer. It runs well in the water without slipping. Have a healthy summer. AXIAL SCX10 III JEEP WRANGLER RUBICON JLU Tansmitter and receiver : FlySky FS-GT5 2.4G 6CH Servo : DS3230-180 6.8V 34.5Kg / 0.2Sec ESC : Hobbywing QuicRun WP 1080 Crawler Brushed ESC Motor : Holmes Hobbies TrailMaster SPORT 550 27T Brushed Motor Micro servo : SPMSSX107 SX107 Micro Metal Gear Servo 6.0V / 3Kg / 0.08Sec X2 Battery : DXF 6750mah 100c 3s https://youtu.be/K8TPLyYVB2U

Hello I jumped in the park with the TAMIYA MONSTER BEETLE. The video footage is better than the real thing. The sound is strange after the last jump. There seems to be a problem.

Hello I've been crazy bashing with LMT at the beach. Upgrades are powerful. It runs without hesitation with 4-cell powerful power and a metal axle. Real traditional monster trucks are a lot of fun.

you are not wrong I already tested with the MAX5 56113 The problem is that it's too heavy. When landing after jumping, even the slightest mistake will damage the parts. Due to the heavy weight, it cannot perform the role of a shock properly.

Hello I drove the valley coolly on a rainy day with the TRX4 Defender. It's new to filming while it's raining. The valley water was adequate and we had a lot of fun. I ran on the water with the last speed. Traxxas TRX-4 Defender ESC : Stock Motor : Stock Battery : DXF 6750mah 100c 3s

Hello~~ This is the XMaxx EzRun 4985 1650KV upgrade video. This video is made for people like me, so please refer to it. In the case of Big Servo, it has been upgraded with a modification. The servo force was so strong that the tie rod (plastic) was bent. Please refer to the method of changing to an aluminum tie rod. Currently, after changing the big servo, it is in use without any trouble even after numerous jumps and powerful driving. Motor mount : JH Racing CNC aluminum alloy motor fixing bracket Tie Rod : NEW ENRON Aluminum 46MM Servo Steering Linkage Tie Rod

You should know that the current speed is too fast. I am currently testing the motor. There is heat, but this seems to be solved to some extent by lowering the gear ratio. A cooling fan is also required.

I have a tire weight problem. However, considering the durability of the tire, it is a good tire. If you lower the gear ratio and install a cooling fan, it is a good motor. 6s use, but 8s use is ok too.

Your current speed is too fast. If you lower the gear ratio and install a cooling fan, it is a good motor. 6s use, but 8s use is ok too.

Hello~~ I upgraded to XMaxx 8S EzRun 4985 SL 1650KV. The gear ratio is 18/50 M1. First off, it's very fast. ^^; I get a lot of heat. ;; I need to install a cooling fan. Jumping and high-speed driving seem to be the best. The motor mount used JH Racing CNC aluminum. Like the genuine parts, the gear ratio can be adjusted with dowel pins. Of course, the existing genuine gear M1 is used and the gear cover is also assembled. And after replacing the big servo, the servo force was too strong, so the tie rod (plastic) connecting the servo horn was bent, so I replaced it with NEW ENRON aluminum. The steering ability is definitely working. Satisfied!!! Traxxas X-Maxx 8s ESC : Hobbywing EzRun MAX6 Motor : Hobbywing EzRun 4985 SL 1650KV brushless motor Servo : POWER HD WH 65KG Digital Servo Metal Gear Tire : Pro-Line Racing Badlands MX43 Battery : DXF 8400mah 120c 4s X 2 Body : Pro-Line Racing Pre-Cut Brute Bash Armor Body (White) Gear : 18/50 Spring : Pro-Line Racing Dual Rate Spring Assortment Motor mount : JH Racing CNC aluminum alloy motor fixing bracket Tie Rod : NEW ENRON Aluminum 46MM Servo Steering Linkage Tie Rod - PART - RPM 81732 Oversized Rear Axle Carriers

Hello. ^^ KRATON 8S EXB strongly bashed the beach Battery 8-cell 56113 Gear ratio of 30/39 is the strongest. It feels good when something heavy is flying. Arrma Kraton 1/5 4WD extreme bash 8s ESC : Hobbywing EZRUN Max5 200A Motor : Hobbywing EZRUN Brushless 56113 SL 800KV Motor Servo : Power HD WH-65KG metal gear servo high torque Battery : DXF 14.8V 4S 8400mah 120C HardCase Lipo battery X 2 Tansmitter and receiver : FlySky FS-GT5 2.4G 6CH Gear : 30/39

Hello. It's been a while since I ran a little Notorious. The variety of performances makes it a really suitable Rc Car. I also did a cool jump.

Hello~~ After upgrading the LMT Lower Link Ba, I tested the last drive. It's also made of metal, so it's very sturdy. I should have done this earlier. It's good that it's so strong. It is the best effect in an inexpensive way. 8 aluminum metal rod and ball joint CW & CCW 8 M4 nuts 16 M4 spring washers

Hello! The low link bar was damaged while driving the LMT. ㅜㅜ I found a way to upgrade the low link bar with good cost. It is convenient to purchase a metal link bar, but it is expensive. The cost of repairs alone is in the mid-$10s. Note please. Aluminum Metal Rod & Ball Joint CW & CCW 8EA M4 Nut 8EA M4 spring washer 16EA