[Team Associated Rival MT10 owners.]

Useful video, thanks.  Can I ask what fan that is attached to the engine?  I don't have one, is it essential or just a nice to have?

[Recommendations for brushless off-road RTR truck sub £250]

I understand you have a budget to stick to, fair enough but my 2p's worth...  I have a v1 Associated MT10 and love it.  Havn't broken anything yet although I drive it with a degree of mechanical sympathy e.g. not launching it into space in skateparks!   Great fun on 2S and nuts on 3S bashing round a woodland trail with jumps etc.  My nephew has an FTX Carnage and when we ran them together there didn't seem much in it  handling-wise etc.  Both good fun bashers.  Personally would recommend the MT10 though.

[Team Associated Rival MT10 owners.]

Failsafe is mentioned on page 5, hope this helps XP120_DVC_Manual_OUTLINED.indd (associatedelectrics.com)

 

[Team Associated Rival MT10 owners.]

So the FTX shell fits OK does it?  Just have to drill different holes for the body posts I assume?

[Team Associated Rival MT10 owners.]

On 05/03/2023 at 18:47, psyklone6 said:

Welcome to the club! Hope you enjoy the truck. I do like that new body style.

 

In my opinion... Don't be tempted by the steel CVDs upgrade. I found the drive cups ended up wrecked really fast. For the price of the whole CVD kit, if you break the plastic ones just replace like for like. I'd be interested to know if anyone else had better luck?

(I've never broken a plastic one tbf.)

 

I've heard good things about the upgraded shocks. But to be fair the stock ones are still fine for me. I don't bash TOO abusively but I don't baby it, either.

 

I've got the alloy upgraded shocks on mine and apart from the fact that they look cool, I would say it handles landings better with them fitted...

[Team Associated Rival MT10 owners.]

Can't offer any practical help I'm afraid as mine has worked fine out of the box.  Do you have a local model shop you could go to for help?

[Team Associated Rival MT10 owners.]

Take a look at page 2 of this manual...  Reedy_ESC_SC600BL_Manual.indd (associatedelectrics.com)

 

[Team Associated Rival MT10 owners.]

Been a bit quiet here so a few pics from the weekend - went out with my nephew for a quick bash...  Was impressed with the Carnage, it seemed to fly well although my lack of throttle control probably has something to do with a few hard landings for the MT10!

 

[Team Associated Rival MT10 owners.]

Check the motor pinion is meshing correctly - there's a section in the manual about it I think.

[Team Associated Rival MT10 owners.]

I use blue threadlock on the wheel nuts - seems to help (having stripped a hex before!)  What's the benefit of venting the tyres?  Do you just make a small hole in the sidewall somewhere?

[Team Associated Rival MT10 owners.]

So how did it go?  Improvement over the standard set-up?

[Goodwood Festival of Speed and the TRAXXAS stand]

So, went to the FoS for the weekend and had a great time.  Spotted the TRAXXAS stand with a netted cage for the demo runs of all the off-road stuff.  Asked if I could have a go and was very quickly told no, demo only.  You could try the crawlers on a small course but that was it.  The 'pro's' were good to be fair, launching up a vertical ramp, bouncing of a canvas roof and coming back down for a (very hard) wheels first landing - they do seem to be tough models!

[Team Associated Rival MT10 owners.]

Wow, that looks bombproof!  I was thinking more along the lines of clear tape for the outside of the body 😉

 

Helitape Bike Protection Tape by 3M ™ – Trailvision - Mountain & Road Bike Bearings

[Team Associated Rival MT10 owners.]

@Spunkymunky88 - I've not bothered with the mesh cover and not had any issues.

 

@Buggy Malone - I used Gorilla duct tape to reinforce the body holes and other key points.  also used helicopter tape (MTB frame protection) on the outside of the shell on the key places it will slide on when mid-crash.

[Team Associated Rival MT10 owners.]

Could soon destroy the lawn and the flower beds if those got let loose 😉

[Team Associated Rival MT10 owners.]

The MT10 is my first RC for years so can't really comment in comparison to others.  However, I have bounced it off a good few jumps/trees etc and it has stayed in one piece.  Brilliant fun I must admit.

[Team Associated Rival MT10 owners.]

Do it!

[Road wheels/tyres on a Rival MT10?]

Kind of fancy getting some cheap on-road wheels/tyres for the Rival just for fun and to see how it handles.  They will have a much smaller diameter than the off-road tyres so I wonder if it will overrev and/or overheat the motor or will it just find it's natural limit and be ok?  Anyone tried this? 

[Team Associated Rival MT10 owners.]

So, swapping the Badlands to the front (and using the wider hub option) has turned the MT10 back into the drifting, donuting, powersliding monster I prefer.   Just so much fun and spraying dust and dirt in all directions.  Still impressed with how smooth the suspension is as well after the shock upgrade 🙂

[Team Associated Rival MT10 owners.]

Can't really offer any advice as this is my first RC model as well.  Can only suggest going through the instructions in the user manual for setting up the radio/receiver etc?  Failing that post something in the general RC section as there will be people there with far more expertise.

[Team Associated Rival MT10 owners.]

Been a bit quiet in here for a while so...  Had no issues with loose wheel nuts since using Loctite so that's good.  Had to buy a pair of Proline Badlands as the MT10 wheels/tyres were out of stock after stripping a hex in one of the wheels.  They are really grippy ( were spraying me with sand when I ran the truck!) but have made it it a bit understeery.  Have swapped then to the front and used the wider hubs to give more clearance - hoping to get back the power slide hooligan it was when using all four MT10 tyres.  Also fitted the Associated alloy shock upgrade and it is really smooth on landing jumps etc.  Will report back on the handing after the wheel swop round.

 

If anyone has a spare standard MT10 wheel going spare please let me know 🙂

[Team Associated Rival MT10 owners.]

If you use the blue one it's designed to come undone again with a socket - not a permanent seal - cheap too.   Thread Lock GP Blue Industrial Grade, 10g (farnell.com)

[Team Associated Rival MT10 owners.]

Have you tried using threadlock on the wheel nuts?  I have put it on mine but not had a chance to actually run the thing yet unfortunately.  

[Team Associated Rival MT10 owners.]

Did the Badlands tyres make much difference to the handling (not had a chance to run mine yet)?  They look grippier than the Associated tyres.

[Team Associated Rival MT10 owners.]

Hiya - I replaced the rear wheels with these (as per Bertberr's recommendation)  PROLINE BADLANDS MX28 2.8" All ATModels (align-trex.co.uk) - fit fine, maybe a few mm narrower track but don't see that as an issue.  Have also invested in some threadlock to put on the axles!  Also found that I had put the rear diff in the wrong way round so the front wheels were trying to go forward and the rears backwards!  Wondered why it would roll across the garage floor...