Hi guys, I appeared to have hit a bit of a brick wall after a ton of reading and research across this forum and others. So, I'm an absolute RC freshman and I've had an FTX bugsta for about a month or so now. I've been researching my first upgrade; upgrading the motor to brushless. I've decided on a Hobbywing Max10 4000kv or 3300kv combo with 60A ESC. However, I've heard that this motor has a 5mm shaft and here's where I come totally and utterly unstuck! It appears that the stock pinion gear will not fit (17T) because I believe the old motor runs a narrower shaft. So, how would I go about sourcing a plug and play pinion gear that will support the new 5mm shaft and tie in nicely with the stock spur. There's like a million different pinion specs and it's mind blowing! For additional info, I'm wanting to use 2s lipo and I'd like to avoid fiddling with gearing for now to keep the upgrade simple. Can anyone please point me in the right direction to selecting the correct replacement pinion gear? It's been an absolute ball ache for me as I'm clueless.. Thanks in advance! Sent from my ONEPLUS A6003 using Tapatalk