speedloader

Yes these are Triton wheels. I havent tried them yet. But have read that they have good grip.

Hello, Almost finished with my build. Just missing to make front and rear window in plexiglas. Does any of you have an idea where it's possible to find a net for the side windows?

Sure no problem.😀 There are no spacers in this tower.

They are mounted in a turtle racing shock tower combo. Only one mounting position.

The bigbore shocks have a longer link at the bottom of the shock and therefore the clearance is better at lower front arm.

Well the stock shocks wont centre perfectly no matter what i do. There is only one spacer (not 2 as i earlier wrote) at the bottom mounting point. I have to keep the spacer at the rear of mounting point in the lower arm. Elsewise the shock will touch the lower front arm. But i think there is space enough for the big bore shocks now. But it surely will be a tight fit.

There are small spacers in the lower front arm. But these i need one on each side of the shock mounting point so the shock is centered in the lower front arm. However the stock upper arms has small plastic spacers for caster adjustment, but the RPM upper front arms do not allow these spacers and therefore No caster adjustment.

Hello,Is anyone in here running the RPM arms and Innovative RC big bore shocks on their HPI Baja?I cant figure out why there isnt space for the big bore shocks in the front upper arm.I have attached a picture of the arms with the standard shock and as you can see it isnt in the centre of the front upper arm.But with the RPM arms, no caster adjustment is possible.

Hello, I got a WT-771 with polished intake from MMR. Whats the stock needle setting for this carb? Now im on: L= 1turn out H =1,5 + 1/8 out

Hi, Which oil ratio is recommended for a high rev engine? Using TS Reed case with 30.5 ESP, and Klotz super techniplate oil. Will 32:1 be sufficient?

Ok i just ordered the bartolone torpedo.

That Bartolone sidepipe for the HPI 5B, looks a lot like the Olimat. Never thought of Bartolone, it looks nice though. I can just see that Olimat is becomming more and more popular. I wonder if they will perfrom the same?

Im just thinking if either the Olimat or Predator V3 is a good upgrade from the Victory Pro?

Hi,Does anyone here have experience about the Uber Predator V3 pipe - quality and performance?http://uberrc.com/product/144/ How will it perform next to Olimat? BR Lars

Hi, I'm considering upgrading to a bigbore, but i cant decide if i should go with Alx Super Malossi or RCMax supreme. 65cc , 71cc or 85cc What are pros and cons of these manufactors? Quality, Power, Support From watching a lot of youtube videos, it "sounds" like Alx is able to rev a little higher, but im not sure if this is the real picture?