EvilR

iCharger 406duo just over a year old with the following stats if you aren’t sure on what these offer. Sold shipped with a Perspex stand (power supply not included) The extremely powerful iCharger 406 DUO is the new 6s icharger to join the 308 duo & 4010 DUO. It delivers an impressive 1400W (@23.5V) in synchronous mode! It’s effectively two 6S chargers in one . When used in dual mode, capable of supplying 70A continuously. 2 x Balance Board CB1010-XH (JST) and connecting harnesses are included with this charger. 406DUO Special Features 1 The 406DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1400W, the maximum charge/discharge current of a channel is up to 40A, and two channels in Synchronous Mode are up to 70A. 2 Each channel supports 6s LiPo, Lilo, LiFe and NiZn batteries, with maximum 1.2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-20s NiMH/NiCd batteries and 1-12s Pb batteries. 3 With 1A/5V USB charging port, convenient for the user to charge mobile phones and PCs. 4 When the channel output connects the battery after the charger powers on, it will start automatically theanti-sparking protection. 5 Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fanspeed. 6 Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the outputpower is automatically reduced; and the charger will shut down when temperature exceeds the Shut-downtemperature. 7 This charger can save 64 parameters sets and support the data import/export to SD card. 8 A 2.8-inch LCD screen provides rich information including current, voltage, power, capacity, internal resistance,control status, time-consuming and temperature, etc. 9 Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expandingdischarge. 10 Supports measurement for internal resistance of battery offline and online. Can measure not only the internalresistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery. 11 The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature,charging capacity, overrun time and maximum power etc. 12 Supports upgrading the hardware program by USB port or SD card. The iCharger also supports the “Logview” Appearance Parameters The software and can display, plot and analyze the charge and discharge data by it. (See detailed information about Logview at the following website: http://www.logview.info) 406DUO V1.0.0 Synchronous Balance Charger/Discharger Specifications Input voltage range: Maximum input current limit: Maximum charge/discharge current: Maximum charge power capacity: Maximum discharge power capacity: Maximum regenerative discharge power capacity: Maximum extra discharge power capacity: Maximum current drain for balancing: USB charging port: 10.0—30.0VDC <60A, CH1/2<47A 70A@Syn. Mode 40A@Asyn. Mode 1400W (Channel 1000W @input > 23.5V) 140W (Channel 80W) 1400W (Channel 1000W) 2000W (Channel 1000W @25V/40A) 2.4A@Syn. Mode 1.2A@Asyn. Mode 5V/1A(current-limiting protection 1.2A) Net weight: Dimension: 0.91kg 171.2×117.8×58.8 ±0.5mm

I have a Castle 2.0 BEC available

I’ve got a unused set of HPI Rover 2.2’s I don’t think I have any foams though

Still looking for a new home! Brand new build and has never been used

£75.00 shipped

Prices reduced New prices in first post 👍🏼

What’s your budget I have a top spec Vanquish VS4-10 Pro

All still available and will entertain sensible offers 👍🏼

Last price reduction 1) chassis inc electrics (no wheels) £1000 2) chassis only (no wheels or electrics) £700

Last bump and price reduction £86.00 shipped

Slight reduction £95 shipped within the UK

Still available and open to offers

All these still available so make me an offer 👍🏼

Sold my X-Maxx but have these options parts and lipos for sale Parts are all new Lipos have 3 cycles through each and always balanced charged on a 406duo Turnigy Graphene Panthers 4S 5000mah 3 cycles through each pack since purchase 3 months back £45.00 each X-Maxx 2 piece central drive shaft with Traxxas drive shafts and base plate so you do not need to modify your current parts £45.00 X-Maxx RPM front carriers in black with bearing £10.00 X-Maxx Proline rear hubs with bearings £12.00 X-Maxx bearing set from Boca Bearings (high quality set of bearings) £18.00 X-Maxx WFO outdrive sleeves £15.00 X-Maxx RPM hinge pins £6.00 X-Maxx WFO motor dual fan mount £14.00 X-Maxx Extreme Racing 3mm Carbon Fibre ESC/Radio tray and chassis stiffener (it’s predrilled for 1/5 electronics I only checked against the XLX2 which does mount on it) Without custom work it won’t work with the WFO dual fan mount listed above £35.00 Random new Arrma GB I just found! part number: AR310854 Arrma 6S Heavy Duty gear box case set £10.00 Price is plus shipping (lipo’s collection from Bedford or I can look at shipping options as I’m not sure on what’s available)

sold

MT410 and the you can make it into an ET48 part and aftermarket support is huge and now after building a few Tekno’s I wouldn’t buy anything else for racing/general bashing!

Still available and still unused! I’m now keeping the wheels so it’s chassis with or without electronics

With less then one Lipo pack through it this Holmes Hobbies Puller Pro 2700kv Team Spec motor is up for sale £75.00 shipped within the UK

All still available and willing to take reasonable offers

And a slight price reduction

Bump as I’ve now included a hardly used Futaba T4PM

Unfortunately not mate, sorry

Split up

Few parts I found when doing my clear out 4x Proline Powerstroke shocks 102mm with the optional spring kit (assume these don’t come with mounting bits but as PL didn’t sell them with the shocks but if I can find any I’ll include) £42.00 a pair or £80.00 for all four 2x Proline Powerstroke shocks 85mm with the optional spring kit (assume these don’t come with mounting bits but as PL didn’t sell them with the shocks but if I can find any I’ll include) £40.00 4x Proline Bigbore scaler shocks 90-95mm with optional spring kits (assume these don’t come with mounting bits but as PL didn’t sell them with the shocks but if I can find any I’ll include) £90.00 Odd Vanquish bits all for their 2.2 OMF wheels 2x 2.2 OMF outlaws in black with clear front rings and black beadlock rings £110.00 4x 2.2 OMF front rings blue (one is a slight shade different) £40 purple (custom Cerakote) £48 Black £44.00 Grey £44.00 2x VP 2.2 Beadlock rings £18.00 1x Vader Capra skid to run stock trans or 10.2 (3 gear trans) unfortunately I don’t have the servo mount for the dig servo £32.00 1x Capra cage with Vitavon CF panels, custom made rear CF panels and painted interior (please note cut on in interior needed to run 3 gear trans with dig) SHOCKS NOT INCLUDED £85.00 All prices include UK shipping

Any UK Mini-Z racer wanting to start a small club or a good sized home track here’s an opportunity! Purchased as I had planned on building a home track but building work didn’t go to plan so no longer needed. All brand new and most still sealed, couple opened just to look 👎🏼 Track comprises of 3x Kyosho 87032 Mini-Z Grand Prix Circuit 30cm tiles (48 pieces) rrp £227.00 each pack to total of £825.00 https://wheelspinmodels.co.uk/i/258304/ 1x Kyosho 87031-01 rrp £275.00 Mini-Z Grand Prix circuit expansion kit 30cm tiles (62 pieces) https://wheelspinmodels.co.uk/i/222033/ 1x Kyosho 87031-02 rrp £74.00 Mini-Z Grand Prix circuit large corner set 30cm tiles (12 pieces) https://wheelspinmodels.co.uk/i/222034/ Total cost £1174 before shipping Selling for £800 but must be collected from Bedfordshire UK