Jump to content

maxamus

Members
  • Posts

    5
  • Joined

  • Last visited

maxamus's Achievements

Apprentice

Apprentice (3/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

1

Reputation

  1. lol don't think I will , new problem today though first run got carb tuned, car going well but then had a flip all ok but then noticed when I apply brake it wasn't really working and it was applying a little bit of throttle but also noticed some of my settings had changed on my tx as new to this I'm unsure if I've altered thr throttle brake settings on one of the channels. and the servo when set to brake is twitching
  2. new spark plug fixed problem , and it roared to life . thanks all for your replies
  3. thanks Mark , I was assuming the guy tried all that at the shop but I have ordered a plug and will give it a shot, ill post results thanks
  4. Thanks for the reply Mond . the guy at the shop tried everything ,also resetting the needles back to standard settings , still no joy I am wondering if it could be the coil although I tested for a spark which was present , I wonder if its to weak or failing sometimes ??
  5. Hi all a newb to this lark lol, I have just recently been gifted a losi 5ive t with a 26cc 2 stroke , long story but anyway, with it not having a tx or rx I fitted one of my aero rx's and binded it with my tx all was good whacked some 25/1 fuel in gave it a few pulls and it fires up for about 15 or so seconds then stopped , since then I have not been able to get it to start , there's a spark ,compression, but it will not start so off it went to the local rc car shop ,and they couldn't get it started after an hour @ a cost of £30 an hr labour so its now back home , ive pulled off the carb didn't see anything odd or outta place , so now I am looking for advice, don't want to be throwing loads of cash at it trying this and that , or on the other hand should I just buy a new engine and be done with it? currently is fitted with the CY180146B 26cc . I am looking possibly at this https://www.rcmodelz.co.uk/engine-parts-upgrades/complete-engines/km-29cc-4-bolt-engine.html is this a direct swap over job ? or should I be looking at simple things to try 1st ? to save the old engine . looking forward to some suggestions from you guys regards Maxamus
×
×
  • Create New...