Raysworkz

Yeah cheers matey yeah just don't plug the battery in channel 4 eh haha i can tell you now it doesn't like it hope you get on better with yours !! Sounds like you know your stuff unlike me so I'm sure you'll be fine !

Hi mate I've fixed the problem !! Turns out if you plug the battery into channel 4 this is what happens !!! Doh !! The battery is in the right connector now and it's working fine . Newbee mistakes !!!!!

Yeah it's a nitro buggy mate. Yes servos not old both digital but throttle servo was replaced recently and steering was working fine before attempting to use sanwa . I will try and change servos over to see if its that but can't see why it wouldn't work. I got no steering battery is fully charged also . Very annoying start I must say !!

Hello mate thanks for the response . I have tried all the settings and it won't change anything steering just turns hard right and won't move ?

hello and merry Christmas !! I have received my new sanwa mt44 and installed the receiver and carried out the bind but the steering servo just turns hard right when it's switched on and will not respond to any input made by the steering wheel ? The throttle servo works just fine only problem is the steering. Any body can help me out I'm at a loss ?

Hope so dude ?? rc parts welcomed ? I have a before video so you can see what it was like before I changed fuel but not an after one ill do one for you shortly ?

Hey guys just wanted to give you some news! I just ran my buggy using byrons fuel and it's cured all my problems ? i was even able to lean it out and put a nice tune on it it's now much faster and way less smoke !! So looks like it was the fuel after all !! Thanks for all your advice and input defiantly won't be using hpi again !!

Sorry yeah the hole where the pull start cord came out of . I'm thinking of getting the engine realy hot and try and get it fully broken in just in case it isn't ? See if that night help ?

Thanks guys it was broken in during cold weather only a few months ago !! I don't think it's fully broken in yet ! Although it's been ran a fair bit . I brought a new engine last night as this engine had a pull start on it but was snapped off by a helpful guy down the track. So I just silicone the hole up and now it starts from a starter box. I'm thinking that could have something to do with it as well ?

Hello ? I recon no mate I'm going to try a fuel change and seal everything up and see how that goes but I'm ready to buy a new engine ? this one had a pull start on it but that's gone now I recon it's that that's causing the problem mate

Haha yes ?? I've been looking at a novarossi mito 4 or fx . I'm liking the novarossi better at the moment but I can get the fx half price !! I'm also wondering if it's not broken in fully as well ?

Thank you for the reply ! It starts realy well first time. The engine was brand new it's done about 10ltrs of fuel up to now. I've changed plugs 3 times doesn't seem to make any difference. I've had a guy who runs my local track tune it and it still runs very rich. It's sworkz rtr engine that came with the 350 evo I'm in 2 mind's weather or not to just buy a decent engine!! But I want to get this thing running right but I'm ruining out of options

Hi guys ok so I'm new to the hobby I have an sworkz rtr with a 21 engine . I'm currently using hpi 25 % but I find I can't lean out my engine and it's very very Smokey runs realy rich but doesn't like it when I try to lean it out ! I'm thinking of changing fuel to see if this helps. Anybody got any veiws or advice please and will this even help ? Thanks in advance looking forward to hearing from you ?