John hutchenson
-
Posts
121 -
Joined
-
Last visited
Recent Profile Visitors
1,237 profile views
John hutchenson's Achievements
-
60amp esc needed to complete a project.
-
like i want to brake it???. well managed to program esc. turnt timing to high from medium. will give it a go tomorrow????if no joy a new esc I think sc8.
-
I have the manual but getting a bit confused with the beeps.
-
I was using that set up in another 1/10th MT. And never seemed to have a problem. would the 2600kv burn out the 60amp esc?
-
sorry ?
-
don't have program card so trying to sort it out manually. but BEEP BEEP BEEP. it doing my head in. I ordered a program card for this esc the weekend but hasn't arrived yet. what's the turbo? also do you think the 3656 3800kv motor and 60amp esc would hold up in this truck?
-
well I have re soldered all the connections fitted a new deans so will see how It goes. it is strange as both esc are made by trackstar. will have a look through programmng next. ??
-
right so I swapped out the 3800kv motor and put the 2600kv back in with the 60amp esc and it goes with out any cogging what so ever. so is it the 120amp esc that is the problem?
-
no I haven't would it be ok as the other motor draws 65amps and the esc is only 60amps?
-
losi 10mt, 1/10, 40tooth spur started with a 15 pinion right down to a 12. tried 3s 3500mah 30c and 2s 5000mah 60c still the same, but as I said 3800kv 3656 motor and a 60amp esc works fine. but when I tried the q20amp esc with the new motor same prob. that's why I was thinking it could be something wrong with the esc.
-
esc and motor thats not working in the model is a 3660 2600kv motor and a 120 amp esc. the one i put in over the week end that works an d runs the model is a 3656 3800kv motor and a 60amp esc. both setups run on 3s 5500mah 30c lipo
-
right here we go. I have a 3660 2600kv motor that was cogging under load, on the the bench works fine. uped and lowered pinion still the same. so i hooked up a new 3656 3800kv motor in to the same esc and the same problem. what could it be. have had a bit a read up and think it my be a bad solder joint on the esc? on inspection they all look ok is there any other way to be sure.
-
as title looking for a 3800kv motor 3660 or 3665 4 pole, 3s capability.
-
looking for front/rear diff cups for losi 10mt
-
went down to a 13tooth pinion and she's off. thanks everyone for your help.
