Hello,
This is my first time using any type of forum concerning RC cars! I have a problem with my FTX Vantage, which I have recently converted to brushless/2S LiPo using this ESC and motor combo: http://www.hobbyking.co.uk/hobbyking/store/__65980__TrackStar_ROAR_approved_1_10th_Stock_Class_Brushless_ESC_and_Motor_Combo_13_5T_.html (a really great value set which works perfectly in my Tamiya DF02 chassis!)
The Problem I've experienced with the Vantage is possibly something to do with the transmitter and receiver, which is an etronix system. After I calibrate the throttle position using the programming button on the ESC and pull the trigger on my transmitter, the car moves off in reverse at full speed, and when I set the trigger to reverse the car moves forwards at half speed (which I assume is the setting for reverse.) At first I thought simply reversing the channel would solve the issue, however this caused the car to move at reverse speed in the forwards direction, and would cause the car to cut out altogether if I quickly switched from forwards to reverse position. Not too sure what's going on here!
I have checked all the contacts on both the ESC and the motor and they all seem to be fine. I'm pretty certain that the motor is not drawing too much power from the battery, so doubt that this is an ESC problem, but I could be wrong! I have tried rebinding the transmitter with the receiver, however the problem persists despite my efforts....
Any advice on how to solve this problem would be greatly appreciated! I can't think of what else to try!
Thanks