Mkebmwfan

Bump. 100Pounds!

Bump

New Price; 125!

Bump. Price Drop: 150!!!

Problem sorted out. Receiver problem so it needs a new receiver. New price is 170

Hey peeps. I am selling my Traxxas Revo 3.3 due to having trouble with the police cause my neighbours keep calling them out. Lately Ive been bashing in Lordship Lane Park and there was a big puddle and the truck went into it. I guess water went in the servos cause once you Turn it on it starts shakeing. and the receiver is blinking red. I tried disconnecting the servos and just turn it on while only 1 servo is connected and the Throttle/Brake servo is ok but if I plug in any other it starts shakeing. Now im not really into repairing it cause I dont have the time to do it. The engine (Dynamite T19 pullstart/was 130pounds) is brand new (2 weeks old) and only 4 liter/1 gallon of fuel has been run thru it.It has fuel filters on both fuel lines. Starts easy, and has allot of torque and a really good top end. Brake in process properly done with good weather conditions and allot of patience. I have allot of spares with the truck: Traxxas 3.3 engine for spares cause compression is really low so if you want to run it it will need a rebuild kit. 2 Traxxas OptiDrive unit EZ Startbox with 1800mah battery and wiring for the truck Stock Air Filter Replacement Steering Servo 60CM Silicon Fuel Line from Proline Racing Multitool for Glowplug/Wheel Nuts Glow Plug Igniter + Charger 2 Sets of AA Arms unopened. 2 Dynamite Glow Plugs The truck doesnt have a bodyshell cause it was too shreded and I throwd it/ The Truck is Located in North London for collection but I can send it via RoyalMail in all the UK. I would like to get 200

Hey. Do you still have the Turnigy Trackstar combo?

Hey chaps. Looking forward to add a truggy to my collection and was doing some researches and these 2 are the one I like. My budget is max 350

Hey all. I want to add a BL to my collection of bashers and I came across this Basher Sabertooth. Does anyone own one? It costs 160

Thanks for replying. I will buy the fuel when I get there. Also the RX Pack is NimH.

Hey guys. Today Im going to a Holliday and Im takeing my Revo 3.3 with me. Everythings is nice and clean, engine has been cleaned out with wd40 and dryed so as the exhaust and airfilter. Everything else is nice an tydee. RX pack and glow plug igniter in separate box. Air filter oil,after run oil,shock silicone is in a box with the exhaust and the airfilter. I take my Imax B6 charger as well. Did anybody ever took hes RC via Flight? Im kinda worried they will have a problem with it. Last time they didnt but who knows. Can you guys tell me your experiences please?

20% Byron Gen2

Hey all. Lately Ive bought a Dynamite T19 Mach 2 engine for my Revo. I managed to break it in, everything went smooth. Only stalled a couple of times and was easy to restart it. Im still at the in setup which was preset by thr manifacturer for breakin in so its riiichhhh. The engine is at 220? when I am bashing it and I cant really find in the Guidebook what is the optimal running temperature and how much can I lean it out. Also please give me some instructions please on how to lean it out(the process of leaning) cause I can feel that its rich cause the acceleration is kind of like slow(really far from wheelies) and allot of smoke is coming out of the exhaust. I mention again that Im a beginner with nitros so dont be crude with me ). I read a review that someone who is useing this engine leaned it out and it at a stable temperature of 260? and I dont know but that seems a bit hot for me... So basicaly process of leaning out and safe temperature.

Thank you guys. I just bought fresh fuel and 2 extra glow plugs. Bought after run oil and a new glow plug igniter. I bought 20% Byron Fuels Race Gen2. The guy in the shop said its the best for it so I bought that. Tomorow I dont think I will have time but Monday I will start brakeing it in. Il post feedback about the process and how I am getting along [emoji14]. Cheers again

Hey guys. I recently bought a new engine named Dynamite Mach2 .19 for my Revo. It arrived today and I just installed it . Im having concerns about the fuel line. Some say it should be 6-8inches. Mine is about 5 and a half. Will that be ok? I had to modify the throttle linkage cause the small arm of the carb was to short and didnt reach the throttle linkage. I heated up the plastic linkage and bent it up about and now its fine. The engine hasnt been started yet and I have like 1 liter of fuel left from the past (about 3-4months old). Should I use that or go to an RC-Shop and buy fresh fuel? (Nearest shop is about 11 miles so its quite a big jump). If someone has some tips for a beginner like me related to breaking in the engine and maintaining it, what to pay attention to,etc I would be thankfull. Il put some pics of the monster.

Hey all. Moment has come. Today Ive ordered the new engine in my Revo. Poor things sitting for more then 2 months. The new engine doesnt come with a clutch assembly so Im in kinda like an issue. Will the TRX 3.3's clutch fit the Dynamite T19 engine? I bought new bearings,clutch shoes and the spring. I hope its gonna fit. Second question is what fuel should I use in this engine? I want it too last long so please tell me advices what to do and what not cause Im still a novice. Truck is completely dissasembled atm,cleaning out everything nice and tidy. Thank you for help everyone [emoji14]

When you ran it in could you post some feedbacks pls?

Hey guys. Im lookin forward for getting my Revo back running . I took a look at the Traxxas 3.3 engine then I found on the Ofna site this JL28MAX engine. The price of the JL is 130 included with the CNC mount and the price of the TRX 3.3 is about 100-120. Does anyone have any experience with the Force engine? I just cant decide which one to buy? What do you guys say?

Mine had the same issue. Those carburateors are just plastic and if you keep adjusting the LSN (Low Speed Needle) then it just gets loose and you cant screw it back cause it keeps moving and getting out. You can try something like black silicone but only a little bit on the screw and screw it back till its flush with the carb body and hold it for like 2-3 mins. If youve got luck that carbs gonna last a bit more but Im not givin it too much hope :/. Best is to just order a new carb if the engine is in good condition. If the engine is worn (ran more then 10-12 gallons of fuel) then you might get better if you just buy a new engine. I will get a new engine in my Revo this month. Ofna JL28MAX is the name of it. I didnt find any reviews of it, only some videos but people say that it aint that bad so I hope it will last!

Another stupid question but understand it please cause im a newbie [emoji14]. If I run it in correctly and run it with a healty tune how much can an engine like this last?

I was thinkin about gettin a new engine in it so I can sell it as a runner like Nitroholic said. I took in consideration an engine named Ofna 55205 JL. 28MAX which is kinda like in a good price and its a drop in engine to the Revo. Here is a link with the engine: http://www.ebay.co.uk/itm/360917677134?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT The 3.3 engine is pretty much expensive and I couldnt really find a proper one in the used sections so I tough Il buy this Ofna. The problem is that I couldnt find any review :/

Hey guys. I have kinda of like a stupid question and I am sorry for that. Ive got a Revo 3.3 In 8/10 condition, with some upgrades and a dead engine. I want to sell it and I dont know how much to ask for it. Could you guys help me out?

Looking for a good condition Traxxas Stampede VXL (waterproof one).

Do you want a swap? Il give you a Traxxas Revo 3.3 in good condition with an engine that needs a bit of attention,Hobay Hyper transmitter and receiver.