flatout!

http://www.freeprawnracing.co.uk/angled-short-stack-uni-air-filter-1.75-height.html This is the sort of thing im looking at but in a double or triple filter

The losi filters the one I'm going for, or a triple filter, dt1 is it, but the losi one is short, and dosnt catch on my cage

Have you got that reed of yours in anything yet Dave?

Fanks!

You've done what pal?

It'll be a bit better when I gear it up right, gunner go with the 20 54 and hope it's going to be a bit better Stop it screaming pointlessly up the top end, it's running out of steam up top end so the gearing should sort it out, It's good fun having all this power and theres a 34 reed on methonol coming to our gang soon lol! Now that's going to be power! There's going to be 3 reeds, 30.5 reed fm 32.0 reed And a 34 reed tuned for methonol Can't wait to get some videos of them three at it lol! Wwwwwhhhhhrrrrrrr!!!!!!!!!!!!!!!!!! FLATOUT!

Baja 5b 30.5 reed ht: https://youtu.be/H6TgD5afa2I 30.5 ht obr reed: https://youtu.be/Sb6SWrvBhdk Few vids

Tuck it out for spin!

Evening guys, Off out tomorrow for a couple of tanks, going to try another new spot tomorrow iv been before but didn't run my motor coz my t/b servo let me down lol! Was a while ago now but it's still the same up there, it's about getting to the places with the van, to keep the tool box close can't be doing with carrying stuff lol! But iv got to make sure we all can get there and it's safe, can't go leaving the van in the middle of nowhere it'll get broken into, But as for were it is its close to were i normally go, it's all grass and a few little jumps here and there, I want it to rain hard tonight so its wet id like it to be as wet as possible so I can test these belted viper tyres out, im impressed with them up to now running in the dry, its rounding them off slightly but that normal a bit of wear, I'm just interested to see what there like, I imagine them to be good in the wet so we'll see. Got some kraken front arms top and bottom coming Monday Tuesday hopefully and a chassis to replace my bent broken one lol, Can't wait to get the front arms on, mine are completely nackered, The balls on the front hub are just dropping straight through lol, and that means that the bottom front suspension arm is sitting on the bottom of the front hub lol, So yeh it'll stiffen it all back up again with the new hinge pins and squat plates iv got, genuine hpi hinge pins and squat plates Be like a new un when the front is done, the rears done and im very happy with the rear end its lovely and tight and the diff is great its locked the diff right up just how I wanted it, 20k diff oil, if i was to change it again, or I get a problem with the the diff its coming out and im going to replace it with a vertigo diff locker, for sure, My motors got more than enough power for what I want, you can only go round corners a certain speed or it all goes wrong lol! But I love getting that rear end squatted down and get it on full power pushing itself round lol! Loose a bit of traction to get the rev's back up a bit, No clutch to dip so you have to drive it, lol! Im just getting used to having the power when I ask for it, pull the trigger and its there specially in the low range, you don't have to scream its head off anymore all over the place, better on the tyres too, loads better on the tyres, I was always on full throttle and it was ripping the crap out the hostiles mx's, thay didn't last a tank from brand new lol But now nice and steady and when you need a bit of power you just ask for it, ask for it and you get it, a great big hand full lol! Ill get some footage from tomorrow

SOLD!

Sorry I removed this thred and ill but another review up in a week or so, I was a bit hasty in my review and ill redo it if that's ok with everyone, sorry if is effective to anyone

If that little square piece thats fell out will help with fitting a aftermarket exhaust The bend in the header won't have to have as much of a bend on it now, that piece thats come out restricts you getting the header in there lol, Done you faver.

If you want somthing I can sort for ya, send a pm of what it is your after or is it a case of looking and deciding what you'd like to buy for it lol! Its all stock stuff for the yama buggy, basically 2 Buggys stripped for spares

Here I have is a little buggy I picked up the other day, it was all in pieces and iv just put it together to take the pictures of what it looks like, its no good in bits you'll never of known what it was, I'm still none the wiser, i know nothing about nitros, from what I can make out the engine is all there and the head is off, don't no why but when I checked the bore and piston it all looks fine, held the he'd down and turnd it over and its all good, it no interest of mine im into 5th scales, it needs a pull start and a front suspension middle mount, the screws have been snapped off inside, easy fix for about a

There loads more were they come from, Just give them rx's a try, they should be fine, there quite new, I think shaft wise you could also try the fg shafts, there all the same on the yama buggy and fg, Some thinks are usable of the fg to fit to the yama buggy, I was going to put the fg front end rear end on the yama buggy chassis but never got around to it, The yama buggy is a 1 piece chassis too, but not very strong compared to the fg chassis, So if your stuck for any more parts for your yama buggy drop me a pm and ill get you sorted as quick as this time round

We're did the 990 come from gaz? Out of interest really coz I think the 990 I got off almighty15 was folty, and im not sure were he got it from!

Don't forget though if your setting the suspension for the wheelies it'll handle like a dog in the corners lol! Itll just tuck under when you have the front soft lol! Itll flip over like deans was today, not by accident either he can do it on que lol! Watch! this! watch! this! and FLIP! It was over and straight to its wheels, parked lol! Perfect! Pmsl! But the Sc isn't renound for it cornering is it? If I had the sc id have the rear squatted on the rear and the front end up in the air, thats how my ovel race car was set up, its nose would come up like a speed boat anyway but its a good suspension setting for getting tucked in for the corners with the ar5e hanging out and get it ready for getting out the corner, Its all set up ready as I see it but im sure people well differ, but i bet I whip there ar5e from one side of were we are and back again, Only if it ant in a straight line though lol! I can put corners in a straight and some more, I was once described as a stabbed rat! Lol! But I love my baja atm mainly the suspension now it sorted, need some front suspension arms but there going to have to do for bashing, if it was racing then that would be different wun it! It would be done yesterday lol! You'll get it gaz, just be careful on them suspension setting if ya turn in fast it'll flip over im sure with the front being soft lol!

Grinning from ear to ear I was, it feels funny when the front wheels come up, iv never been close, but now bounce them front spring on and off the throttle and its up lol, iv got the rear springs as hard as they'll go and the fronts soft so they bounced it up, Thats probably what you may need to do gaz, wind your rear springs down to harden them up, so the rear springs don't Swallow all the power up, if the rear springs are soft it just squats down

It most of been a bit of head wind gaz the other day, Iv had some good wheelies out of mine today Wheelieing straight out the blocks lol! Good fun init Just rammed a tank through it, straight through in one go, I dont think iv done that for months, months its been since I last put a tank straight through my baja like that, Seemed to have sorted the leak out. That seemed to be ok another run is in order to make sure it's definitely solved.

Come on then were is it? Get it on! Let's see some wheelies done

What Kill switch is it Dan?

Iv just messaged him because iv forgot to order somthing that I didn't no he did Zen Plug cap the red one and the spring for in side, the one I had on was way to big and got knocked off again after a roll, quite a quick roll but it managed to do that lol!

Yep lucked in to all that and iv gone for a pull start lol! A genuine zenoah from freepawn and iv seen a few of these zenoah ones and there different to the cy and the others aswell, The zenoah pull start hasn't got a really deep pawl, and from what I can work out its the pawl being really deep seems to be the trouble atm with these cheaper pull starts, The zenoah pull start seems to look and feel much much better, and the compression this reeds got is insane and it'll kill just about anything, I was worrying that it would burn out the bearings in the rota starts, mi mates get really hot and it turns over really quickly, mine turns over nice and goes on the first couple pulls, the compression helps in one way and kills what ever it is thats starting it lol! Let's just hope the zenoahs going to do it, its a zenoah motor so it should have one hay!

You have a side pipe silly Billy lol!