badenemy

thank you thats what i have it on.

hi to all i have been looking over all the settings in my hpi firestorm flux it has a cut off point when my lipo battery is depleted to a certain point i can change this but not sure what to set it at my battery im using is gens ace 5000 50c 2s any advive would be greatfull.

ok cheers

i mean attaching battery to charger and just reading what charge is in the battery lipo 2s that is

is there anyway to just read what the battery charge is looked over the manual 4 times now its the 4 button overlander charger below.

i read the manual but could not find it but im sure it must do the charger is an Overlander RC6-VSP 80watt 7A Output AC/DC Charger

ok so charge at 5.0 and 7.4v 2s and store at the exact same ?

thank you just one other thing if you have, an overlander 4 button charger is there a setting to tell me what the battery is currently at.

hi to all i have got 4 gens ace 5000mah 50c 2s lipos and an overlander 4 button charger im wanting to know when i charge it on a balanced charge what amp should i use 5.0 is what i think it is but it could be 0.5 just want to make sure also would like to know what amp to use when using store mode thank you for your help.

the hpi e firestorm has a tamiya female connector i take it you mean cut it off and put on a female deans

thank you very much for your help and have a merry xmas and a happy new year.

I've seen what i think i need on ebay but not sure off the exact size required

never soldered before

yes my charger has deans connector can i not buy an adaptor as i want my son to use the NIMH battery also to start with to get used to the car

hi guys and girls need some advice just bought hip e firestorm and it came with a NIMH plasma battery but after asking on the forum i was told to get some lipo batteries problem i have is lipos i have come with deans connector so how do i connect deans connector to the connector on HPI firestorm this is the battery i have in the link below that connects to the car. http://www.ebay.co.uk/itm/like/310857408399?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0

thanks everyone i have ordered tbone front and rear bumpers and tone wheelie bars were can i get dog bones just in case i will get some bright tape also so i have a chance off finding them if they pop off

which one mate the question was can I use any off them on ebay that links shows about 20 different ones so not sure if you miss read but thank you for your reply.

guys just quick one bought Overlander RC6-VSP 80watt 7A Output AC/DC Charger http://www.ebay.co.uk/sch/i.html?_odkw=multi+balance+boardOverlander&_from=R40|R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.XOverlander+multi+balance+board&_nkw=Overlander+multi+balance+board&_sacat=0 can i use any off these balance boards or does it have to be an overlander one

cheers allready have tbone front bumpers ordered and wheelie bar. were can i get cvds for them and thank you for your reply. cheers allready have tbone front bumpers ordered and wheelie bar. were can i get cvds for them and thank you for your reply.

hi there im just waiting on these two rc cars arriving to wrap up as xmas gifts im just wondering what spare parts i should get just incase off any breaks has anyone any idea off what i really should have in the way off spares and im assuming both use same parts mostly obviously not the motors thank you.

no just using 5 one after the other

just if i use 5 2s lipos does there be a chance off overheating the motor

ok so check the temps maybe after running two packs then 4 and so on

would i be doing the motor any damage by running 5 battery packs at one outting Gens Ace 5000mah 50C 2S Hard Case Lipo pack on my HPI FIRESTORM FLUX and what run time should i get about. thank you

cheers will order the adaptor as im new will leave the soldering for now so two battery packs and two off the connectors