gumbo
-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Prizes
MSUK-Forum - RC Model News and Community
Articles
Events
Everything posted by gumbo
-
I believe they are a different size.
-
Hi there,sorry I should of put it is the rear diff.
-
Hi all,I'm wondering does anybody know of a set of gears that will fit the rear diff of a mi4cxl that are not spec r?.I seem to be having real trouble locating some everywhere saying out of stock.Any info or part numbers would be greatly appreciated.
-
I do believe they have a club car I will enquire about it.
-
Hi all,I want to get a brushless setup for indoor carpet racing.I have been to watch a couple of times and not sure what to get its between a Schumacher gt12 or a touring car,could anyone help with pros and cons with these cars.I am used to nitro buggies so I am a complete newbie to this any help much appreciated thanks in advance.
-
Hi all, has anybody ever used or seen a x-act .21 engine in use.Any info would be great ie are they any good and the usual questions like that.Many thanks in advance.
-
Hi all,im looking for a case to put my flysky pistol grip controller in.I have seen some but i don't think they are the right size any help would be really appreciated.
-
I think silver it is cheers for the advice.
-
Hi all,i have ordered some tamiya spraint paint its copper colour and want to know what to back it with?.I realy want it to pop so i achieve that orangey/copper look some suggest silver and others suggest translucent orange.Any help from someone whos done this colour or knows about colours would be greatly appreciated.
-
Do you have any idea how much it would cost to have it done?.
-
Nice one will have a look.
-
Ok so instead of spraying heat sink/cylinder head how do i measure for a new one?.I want a black one for a xtm xt2 if anybody knows where i can get one that would be great.Are they one size fits all 1/8 buggy or do they have to be specific to that engine.Any help much appeciated.
-
Ok cheers for the heads up.
-
Hi all,is it possible to respray heat sink/cylinder head with hammerite or do you nerd special paint?.Im not sure because of how hot it can get.Thanks in advance for an help or tips.
-
Hi all,im looking for a body shell for my xtm xt2,i believe some hyper 7 shells will fit.So the question is if i change the side guards to hyper ones do you think this will make shell easier to fit.The chassis on xtm are really wide making it harder to find one,but hyper ones are everywhere. Thanks in advance.(i dont mind doing some modifications)
-
I did see somewhere about putting a blanking plate on the back,wasn't sure about that so thought i better ask.
-
Hi all, I am looking at getting a starter box i have a roto start at the moment if i do buy one can i leave the roto start on will i have to remove it.Its a xtm roto start thanks in advance.
-
Thank you for the help,im thinking of ordering a clear shell just in case of mistakes which will happen im sure.
-
Was it sprayed from the outside or inside?also did you strip off previous paint first?
-
Hi all,i would like to change the colour of my buggy shell its a xtm xt2 to a copper/ orange colour.The problem i have is what colour to lay down as a base coat also do i need primer.And finally would i spray from inside or outside of shell i have never done it before,any recommendations on make of paint.Thanks in advance for any tips.
-
I've tried rebinding the 2 cars i have set on it but no joy.The problem is the servos on both cars go nuts then the cars just stop throttle and steering wont work.I have put freshly charged batteries in everything it will pick up signal for about 15 metres then nothing.So my last thing I can try before buying 2 new receivers is to reset everything.
-
Hi all,does anyone know how to reset a flysky pistol grip controller. Having trouble with it so i thought resetting might solve the problem its my last resort.Any help much appreciated.
-
I also have one it was my first car great fun and pretty whippy.I also had to put a new engine in last Christmas but still great little cars, nice work on fixing it up looks good.
-
Would all the above be a straight swap over?or will other bits need to be changed.
-
Hi,could someone give me some advice on a engine upgrade,i have a xtm xt2 with a .24 in it i think it could do with pepping up a bit.Any ideas with what also should it be a straight swap what do i need to look out for.thanks.