Jump to content

Rhysgent

Members
  • Posts

    5
  • Joined

  • Last visited

Profile Information

  • RC Cars
    Ansmann virus 3.0 with hyper 7 upgrades, maverick ion mt BL
  • How did you find this forum?
    Through google search

Rhysgent's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Drive terrain feels smooth with motor out it rolls on the ground freely and diffs feel smooth too Might try dropping to an 11t I got in pinion set see how that goes as a a guide what temps are safe though
  2. i installed the 12t 5050kv http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=43532 and a 13t pinion but the motor gets really hot to the point of not being able to it, does this mean i need to change to a higher pinion gear or lower and what gear would be best thanks
  3. Got everything up and running now working good except the front dogbones pop out sometimes, I've got the helion animus dogbones and outdrives, measuring the animus ones with the stock maverick they are about 3-4mm smaller, i am going to upgrade to turnbuckles throughout from the mini recon to get some negative camber on the front but what else will help Btw its wicked fast and needs punch control set to full and still gets all wheels spinning and front ones off the ground
  4. Thanks gonna get the overlander one as its what the lhs has in In stock will get pinion too as canr can't wait for delivery Im too impatient Thanks for help just need to make servo fit now
  5. After seeing this thread i decided to go and buy a maverick ion mt and convert to brushless, Going for the turnigy Esc motor combo Turnigy 2s 7.2v 2200mah Absima r3wp rx (to go with tx in virus 3.0) Animus steel oudrives and aluminium drive shafts and 4 gear diffs I have a alturn usa low profile servo http://www.modelsport.co.uk/alturn-usa-low-profile-servo-bb-mg-high-speed-/rc-car-products/359810 And mounts which i will try and mount for steering the rx has dual rate so if travel is too far i can limit it down with this Few questions as its my first proper for ages as I've been more nitro and petrol How many pinion gear teeth would be a best all rounder (accel/topspeed) Will this work to charge the lipo? www.wirelessmadness.com/rc-accessories/batteries-chargers/chargers/overlander-rc6-vsp-80w-7a-output-ac-dc-lipo-li-ion-life-nimh-and-pb-charger-ol2604 Or would this be better www.ebay.co.uk/itm/Turnigy-Accucel-6-lipo-charger-LiPo-LiFe-NiMH-Nicad-UK-/180676231920?pt=UK_ToysGames_RadioControlled_JN&hash=item2a112482f0 Any help would be appreciated as im a total noob when it comes to leccy
×
×
  • Create New...