marky7seven

Hi Guys I'm lost with this one also, first of all throttle and brake was working, but once you turn the steering everything starts to jump, and become unresponsive. Its like everything is twitching. I then tried recalibrating, it did step one ok with throttle, but then wouldn't except brake it just stayed on flashing red. Now when you restart it, its flashing like a Christmas tree, in no real order, its like it connects to the remote, then disconnects very quickly. Thank you

Can any one help with an issue I'm having my my Savage, when you put it on full throttle then stop the Hobbywings erzun 150a pro flash red, and is unresponsive. Like its activated thermal shutdown, but this happens from cold. When you restart it works again, then stops. Here is the video:

Ok, change of plan. I've just purchased a used Baja from ebay for £347. I'm going to strip this down and convert to electric. Time for a new thread.

I am looking at baja on eBay to strip them down and rebuild as a electric.

I've built a few on road cars now, so would like to do a basher. My budget is £1000

Hello, can any one recommend a good 1/5 kit to build, and best place to get one. I've looked at a Baja 5b SS, or a Losi 5ive t from a site in the states (doesn't come with a engine, so works out more expensive than the baja). Any suggestion would be great. Its more for the fun of the build.

Cheers Cowboy, sorry for the delay in replying, but this is really appreciate, and thank to everyone else too. Looks like I have some home work tonight, I will look at the bits I need and post them on here. Thank you

Thank you, I didn't want to break any rules.

Hi Guys I'm think about parting exchange a baja, and seeing if anyone would consider swapping it for a eRevo. Do I post this in RC for Sale? Mark

Hi Guys Just an update on this, turns out the card isn't compatible with the 120a or the 150a, even though it was marketed as been. the card did work on a 60a. Does anyone know which card is best for the 150a gen 2 trackstar esc. or even how to program with card, everything is ok, apart from there is no reverse. Thank you Mark

Hi Guys I want to have a go at airbrushing one of my shells, I have a typical garage compressor, in fact its a 'Wolf Sioux 50 Litre 2.5HP 9.5CFM 116PSI Air Compressor" would I be able to use this, or would it be too powerful? If I can use this, what adapters/connectors would I need? Thank you in advance. Thank you Mark

Hello I hope someone can help, I have issues with the trackstar programming card, I've tried it on the 150a and 120a and n both esc I only get the one light in AutoLipo Looking online, it seems a common issue, but no one seems to have an answer. Thank you Mark

I do have a nitro savage I need to convert, but can't seem to find a conversion kit for it.

I think I'm moving towards either a HPI or ARRMA

What about? http://www.modelsport.co.uk/kyosho-inferno-ve-race-spec-r8-brushless-buggy/rc-car-products/39788 or http://www.modelsport.co.uk/hpi-trophy-buggy-flux-2.4ghz/rc-car-products/383161

Hi have a hyper7 I've just converted, and have a Losi 8ight, again converted. Both brought second hand as nitro's. I'm interested in comparing my build against a new original electric car. But saying that, there is a used Hpi Vorza flux on ebay for

No Batteries or Charger, as I have a good selection of those. RX and TX would be good, but not important. Just a good handling car, and good Motor and ESC

Hello I'm interested in treating myself to either a Truggie or Buggie 1/8 scale, and electric. I have a budget of

I will order some, and test what is easier to solder. the 5.5mm bullets look promising.

Thank you Carpi, I have some tidying up to do, including converting all the batteries to dean connectors. I'm new to soldering, so I need to practice first.

Its official, I'm stupid. That works

Hello I'm pretty new to this, but I have stripped out this hyper 7 I've brought second hand, and converted it to electric. My issue is that the motor goes quicker in reverse than forward. I assume this is due to the position I'm mounting it, if I turned it around I'm sure it would be fine. Surely you can change the motor in aspect to its mounting position. I've purchased a Trackstar motor controller, but as you can see from the images below, there is only one light on. Not sure what I'm doing wrong. This is the engine model: Turnigy TrackStar Waterproof 1/8 Brushless Power System 2100KV/120A Here are some pictures

Would you take

Sorry, I'm with drawing my interest in this car

Cool, I will give you