nemo#1

hello,ive been looking for a idler gear 29tooth upgrade as I broke my stock one today but cant seem to find bullet proof or hardened idler gear just standard ones that cost about a fiver,can enyone help me to find a up graded idler gear thanks

Hello my nephew has bought a savage xs for his birthday,only problem is the pinion gear works its self loose after 1 battery or some times not even that long,it was bought from new only taken it out 3 times with same problem every time,even after tightening back up with lock tight,eny suggestions ,thanks

Thanks for the info guys,I left it with my model shop yesterday,hopefully they can sort it.

ok thanks guys,its a tork engine on a savage hp,I haven't been keeping an eye on the temps,only had the truck a couple of weeks but bought it second hand and had this problem from the start

Is there eny solution to stop it moving,thanks

Hello I stripped my pinion gear today,it looked like the pinion had moved out of line with my spur gear but on closer inspection I noticed my motor pin had moved out slightly and with a couple of light taps it went back in,has enyone experienced this,is there eny way I can secure the motor pin from moving again,thanks

hello,im after a k+n style air filter for my savage,where can I purchase one from,thanks

I fancy a set of new tyres for my savage,big joes or trenchers,what you guys think,thanks

Hello,What shock oil would you guys recommend,for a savage hp on 6s,I put some 40w in the shocks but didn't have enough to finish the job so there is a mixture of shock oil in them,just over half throttle it won't stay on its wheels lol,I think it was better with the softer shocks lol

Ok thanks mate,it's my first electric car and all a bit new 2 me lol,thanks

Hello I have bought a second hand savage flux hp,it came with a IMAX b6 charger,and overlander 2s 3250 batteries,and setting the charger at 3.3a and 7.4v they charge fine,but I bought nano tech 3s and 2s 5.0 batts,setting the charger to 5.0 amps it lets you start charging batt but cuts out a second or so in to charge and cuts charger out,only way is to set charger to 4.0a and it stays charging,what would happen if I charged a 5.0 batt at 4.0 on charger,thanks

ok,thanks for the info guys

ok,thanks guys,can you damage the batterys if your only using half throttle or lower end throttle,like I said its all new to me lol,I would rather spend a couple more quid and have good quality batts,thanks again guys

hello,i have finally bought a savage flux hp,all this lipo and brushless is new to me lol,always been a nitro head,what 11.1 lipo batterys do u guys recommend,thanks

hello I have bought the xl chassis plates for my savage x4.6,soon to buy the lrp z 32 engine,do I need a xl motor mount? ,just want to make sure before I order 1, thanks

hello,i am going put a 3 speed gear box into my savage x 4.6 with a 52t spur gear,i have a 13t clutch bell,is this a good combination?,going to put the lrp z 32 engine on soon aswell.thanks

Wanted,savage x or xl flux with up grades,thanks

hello,im looking at servicing my shocks on boyth my trophy 3.5 and savage x 4.6,what shock oil would you guys recommend for bashing or should I get two different types ? thanks

ok I thought it could cause problems,i will just order the 13t bevel gear thanks

hello,i have a savage x 4.6,a couple of teath have broken on my bevel gear, the 13t one. was thinking about the bulletproof diff and bevel set 29/9t,will it be ok to have front on 29/9 and back set up still on original 43/13t

is it in good condition mate,i can get a 3 speed hpi gear box for 52 pound posted,and is it a hpi upgraded spur gear,is that in good cond ?, thanks

do you know how much the gear box will cost mate

is it a straight forward job converting a savage x 2 speed in to 3 speed,thanks

thanks guys,just been looking at the lrp engines,would you recommend the zr32,would that engine be as fast as a hpi k5.9 ?

I have a savage x which needs a new engine was thinking of the hpi k5.9,what would you guys recommend,thanks