BN17VTEC

hey guys don't want to jack your thead nick-b so ill just post my link to mine as i have not had much response on my post but a few guys on your seems to know there stuff i just would like some question answered if possible thank you again http://www.msuk-forum.co.uk/topic/208654-just-another-3racing-sakura-de3/

so i need to up grade never really had a decent one ... was looking at this are they any good ? Flysky FS iT4 2.4Ghz 4CH RC http://www.asiatees.com/display?Fly-Sky-All-Parts-Hop-Ups-Upgrades&brand=Fly%20Sky&model=All&id=63151&pid=1

sweet ill do a little research on the servo's talk to me about this counter steer then ...

ok so iv been on here a while but long forgotten about this website and my sakura d3 luckily iv dug it out of the cob webs and getting back into it now , you may have seen me post things on other pages so forgive me if you have already seen a post similar to this but I

Ok this is my situation as you can see from the picture below there not enough room to get the wires from the esc to the motor without bending or damaging them. I was going to re solder them in the oppersite direction so there wires and terminals would be on the outside if you will I'll pop some pictures below , but after closer inspection iv realised what you just said so the only other options I can come up with is drill holes in the rear bulkhead , to feed the wires through ? Sent from my iPhone using Tapatalk

You sir were correct done it now onto the next problem of relocating the terminals ha ! Sent from my iPhone using Tapatalk

Quite simply I unscrewed the three screws in the back of the motor to see if I could turn the connection terminals around and now the case won't got back together any ideas?? I'll post a link below with the motor. http://www.skyrc.com/index.php?route=product/product&keyword=Cheetah&product_id=182 Sent from my iPhone using Tapatalk

Yer you can upgrade to carbon graphite chassis or a few others too I had a shaft driven tt01, and just wanted to test the tater with something new Sent from my iPhone using Tapatalk

Ok no worries Sent from my iPhone using Tapatalk

4 Advan wheels for sale 17's no tyres just been sandblasted ready for painting Staggered fitment & offset fronts 8J rears 9J Perfect skid wheels for a 200sx , skyline etc will also fit on ep shape Honda civics 114.3x5 400

Iv gone and brought a sakura d3 with a few hop ups too ! First CS car Sent from my iPhone using Tapatalk

Hi guys I have had a tt01 for a while now was pretty cool to start off with Didn't really wanna spend big money on it but now it seems a little out dated , What I would like to know what else is out there 1/10th size that drifts well Was looking at upgrading to a TA-05 CS is this a good platform to go to , I'm ideally Looking for a good set up drifting , not for touring. Also I brought a good sensored brushless power system would this fit a TA05 The specs are ; 10.5T 60A sensored brushless motor & ESC

Would anyone be able to tell me if this is ok for drifting its for a tt01 for those that can't see the link its a Cheetah esc & motor combo SKYRC Cheetah 1/10 60A 3250KV 10.5T Sensored Combo Brushless Motor ESC Program Card Will I need to change any of the gears with this need some helps as I wanna order it this weekend if possible. http://bit.ly/1bVsnWj

i wish i had read this 20 mins ago as i just put up a thread with some of the answers in here duhhhh

Hello firstly im going to introduce myself , my name is Ben Rowe and i live in West Sussex. I own a TT01 and also a HPI E10 right basically im looking to create an awsome tt01 drift car. the car is stock at the moment i would like a car that is good in tight cornering but still able to do the long sweeping drifts too i know most of it is skill practice practice and more practice , however there is a list of things i would like somebody to help me with firstly the car needs to go from brushed to brushless want i really want is the best stuff for not over the top prices. i will be upgrading the car to aluminium steering , prop , knuckles , top arms , lower arms , etc. this is the list of things that i need help with What brushless system to run : theres so many out there. iv herd that a sensored ones are better ? Turn motor : ? 10T 12T ETC ? Pinion gear : ? im thinking solid axle rear diff one way front diff ( to help with the linking of drifts and a bit more control ) some sort of controller 2.4 ghz ? Any help appreciated