ams_Sxi

Yep all stock, the one in before was the manufacturers fitted one. Was still glowing OK when i took it out but looked quite old and wasn't starting at all with that in.

Was having trouble starting my eb4 so put as new glow plug in. It starts but only with a little throttle and doesn't stay idle unless i have the throttle pulled a little.

Really struggling to start my EB4 S2. What do you guys suggest. I have ordered os8 glow plug https://www.ebay.co.uk/itm/230844401025 think this is right one. I need something that will make it easy to make the fuel go into the carb. Also any other suggestions will help

Thanks for your help, the modezone stores are closed down now so can't take it back. Might try file the lower wishbones, don't want to be buying new tyres/wheels all the time...

Recently got a Thunder Tiger EB4 S2 Pro from Model Zone. I didn't really take much notice at the start but the front wheels have alot of camber and they are pointing inwards so the inner bit of the tyres are wearing out. I took it to a model shop who adjusted the camber for me but after that the drive shafts kept popping out so had to adjust it back to how it was. Now I don't think they are the wrong drive shafts in the front, just wanted to know what size should they be and also if its a common problem and if there is an easy fix?

Got a EB4 S2 RC Car, set up correctly following the manual leaving about 1mm gap on the carb. Had few problems starting car kept stalling after starting. Drove it at 1/4 throttle for a tank yesterday. Started up today but as soon as i take the glow plug starter off the engine cuts out. Any ideas?

Bought a Thunder EB4 S2. This is my first car so not quite sure what to do. I was told I need to buy 1/8 Scale air filter (did not come with one) Nitro starter kit. Glow Fuel 20% Nitro Could anyone recommend a cheapest place to get them or if i could buy other alternatives? I am based in South East London/Kent would prefer to travel to a local place or can buy online if it is cheaper. Thanks

Yep will be first nitro, so i have no idea what i am looking for. That's why i thought buying brand new would be better?

cool, yep think i will get from modelsport. Any model recommendations? Budget

Looking for a new RC Car, seen a few at modelzone since there stores are closing down. Either EB4 or MTA4 Don't think they are really that cheap as modelsport are the same price. Where is a good, cheap place to get a Nitro RC Car?