Yoshimoto

Wow! Big improvement for steering accuracy,I'm getting another set.... Don't bother with the supplied screws...they are too long use the kit ones. There's hardly any slop anywhere but I noticed the axle's were a little more sensitive to wheel nut torque....solid overall [emoji41] Sent from my Nokia 2.4 using Tapatalk

The knuckles come with a bushing arrangement.... should help with the wear induced camber from the stock plastic. Sent from my Nokia 2.4 using Tapatalk

Crikey! I almost blew 40 quid on a motor for the Crack wing.....I couldn't see many 2202 motors for sale at less than 35 quid so opted for the slightly heavier 2203...much more choice in this size and just over a tenner. Got most of the parts together for both of them bar props and two sub 6g servos for the crack wing.....it's not really my thing but I'm going to build it up anyway.... it's the Hummer I'm really looking forward to flying again...such a good bit of kit [emoji41] Sent from my Nokia 2.4 using Tapatalk

All sold via eBay please lock. Sent from my Nokia 2.4 using Tapatalk

Nice surprise Axial....30+ quid isn't cheap for this tiny shell but there's multiple decals and livery in the set which will deffo add some easy options when it comes to finishing [emoji41] Sent from my Nokia 2.4 using Tapatalk

Picked up two epp models from one of the local club lads. Hobby king Hummer...this is my third and a RC Factory Crack wing. Looking forward to some quiet sessions with the Hummer in the new year [emoji41] Sent from my Nokia 2.4 using Tapatalk

So it's back to a roller again untill the Mighty Tekin BXR arrives,so for now i've sold the white body and bought a clear one to do a custom colour way.Some of the Jeep 2019 factory colour's are very appealing two or three factory Gray's and silvers caught my eye....I'm really liking their take on grey 'Sting Grey' I think it will look great with a rag top in black. I haven't run the other in a week or so,but it's had a wash and lube as it looked well rough along side the fresh one. So while I haven't been crawling I have been watering the moss and lichens on the course to keep them alive.....it's Baltic in there at this time of year so I've been looking at some space heaters to keep the garage warm while I crawl and paint from time to time... any ideas for a draughty garage with roller door? [emoji851] Sent from my Nokia 2.4 using Tapatalk

Aircraft radio set wanted,2.4 only. Tx + Rx unless DSM/dsm2 as I have Soektrum rx,no daft prices please a flysky FS i6 would suffice but what have you. PP and post unless local to Newcastle. Sent from my Nokia 2.4 using Tapatalk

I'm wondering if I could squeeze a DSMR Rx and the Turbo Racing ESC in there,I'm guessing too big tho,the ESC is 25x25 mm ish Sent from my Nokia 2.4 using Tapatalk

Second used tx also sold via eBay [emoji851] Sent from my Nokia 2.4 using Tapatalk

Ah is that your offer....through here 22 all in [emoji851] Sent from my Nokia 2.4 using Tapatalk

I've never really looked into the Orlando's but that xo1 is a fantastic looking platform. Is there much choice for aftermarket electronics to go into them?... I can see space is very limited.....how does they're own combo stand up you ever tried it? Sent from my Nokia 2.4 using Tapatalk

They will look fantastic,what are you putting em on? Sent from my Nokia 2.4 using Tapatalk

They do look nice......for the Hunter yes? Sent from my Nokia 2.4 using Tapatalk

And a second tx Rx ESC combo up for grabs. This one has a few months light use in a stock scx but is in very very good order with full function and no real discernable signs of wear and tear or use. £12 tx £15 ESC/Rx SOLD EBAY The pair £21 That's delivered I pay fees. Yoshi[emoji851] Sent from my Nokia 2.4 using Tapatalk

So I bit the bullet today....got a BXR at the right money from Yakhobby in the US with expedited shipping for under 70 notes all in tax prepaid....and found some cheap Chinese brass to try out...and I mean really cheap...free post and less than the magic £15 quid for the pair of knuckles and diff cover on fleabay [emoji851] I'm sure they will be fine.....[emoji51]

Sold on eBay. [emoji851] Sent from my Nokia 2.4 using Tapatalk

I almost got round to cutting up some foams for the stock rubber..... More stock beadlocks in black and ordered some more Patagonia's too. Took off the brass hex's also to keep a realistic width. Yoshi [emoji851] Sent from my Nokia 2.4 using Tapatalk

New set of four,fronts have 10g each added of lead,chamfered to clear knuckles,factory glued no inserts 7mm hex fits all sorts too. £16 all in [emoji41] Sent from my Nokia 2.4 using Tapatalk

NOW SOLD EBAY. Built not bought,Savox 1210sg,Castle 1/8th sidewinder with 1515 2200kv motor,castle BEC. Little use,good selection of RPM fitted,Badlands on RPM rims,HR motor plate,r bumper, towers. Built over the last couple of years. Perfect working order,all bearings have been replaced in the last 12 months,as you can see very low use. Radio ready you will need a tx and Rx or a DSMR Rx can be supplied. Set up for 3s with one good quality hardcase pack available for collection only,on xt60's. Comes with the 4s and 5s battery expansion parts motor and ESC are 6s capable.Fresh shell has minor splits at front all drilled to halt. Optional nip motor fan by castle...never needed as only had 4 packs through it maximum and doesn't get more than warm on longish grass Roll bars alloy shock caps. Some nip spares to be agreed. Complete posted with all electrics minus tx and lipo £350 all in. Let me know what you think,a lot of kit in great order at what I think is the right money.Not too keen to split at this bundle price. Yoshi. Sent from my Nokia 2.4 using Tapatalk

I bet the lego would be brilliant,they will love it. Weight in the wheels and around the axle's will get them working a good bit better out of the box,then the servo as it's close to its limits with no extra weight added and next on the list has got to be tyres and wheels if your wanting a more serious performer. The stock ESC works fine but ties you to the stock transmitter too. Remember I built these to crawl predominantly on my own all rock course,thankfully they behave just like the tenth versions too. The turbo ESC's are a good little unit but it's not much of an upgrade over stock unless your looking for a cheap separate to use your own radio....its not got as smooth a start up and isn't as nice as the factory in use for delicate traction searching. Trail driving,mud blasting,bashing,average driving round I'm sure it would be fine....it's just not a specific crawler ESC. Sent from my Nokia 2.4 using Tapatalk

Not completely stock but some proper wheels and tyres would get it on a level with the older one. The stock boots are of course showing their weaknesses against the Patagonia's and I'm pretty sure they won't get too close to the wider RC4WD in terms of performance even with some custom inserts.Right now the new one is about on its limit for weight with the kit tyres,it needs approx 20g more front and rear but as is,the tyres will start to fold rather than hold with any extra weight added. So far I've managed to collect some dual stage memory foam and three or four sheets of packing foam in various densities to try and make some workable inserts [emoji851] Sent from my Nokia 2.4 using Tapatalk

The long links took 17 days from New Jersey USA....I can do a bit more now. [emoji41] Sent from my BLN-L21 using Tapatalk

New removed from a deadbolt,fresh batteries are installed and it has been switched on on the bench to confirm full function which it has. 30 delivered,not too keen to split but try me. I pay fees too. Yoshi. Sent from my BLN-L21 using Tapatalk

Well it fits well enough but it's got a way too fast start-up for this 24,the stock ESC is much better (read actually workable) in this respect. The settings for NiMH/LiPo and running mode;forward reverse (boat)...forward brake reverse and forward with instant reverse and drag(crawler) are set using jumper plugs just like some larger ESC. Wish I had a spare micro kicking round for this may be. Yoshi [emoji41] Sent from my BLN-L21 using Tapatalk