steve71075

Bump

Have also found a light set for the shell , a roll cage , extra silver wire covering and a couple of spoilers

Hi sorry for the delay . 4 x sets of wheels 4 x sets of tyres White wheels offset 5 , tyres been used on concrete although nothing a sand and polish wouldn't sort out , make unknown . Black mst 6 spoke wheels offset 11 , mst csr tyres with silver/grey dot on back . wheels were silver and have been coloured in with a sharpie , tyres as new . Black mst 5 forked spoke offset 3 , mst tyres that have been used on concrete again nothing a sand and polish wouldn't sort . can't see any coloured dots on these Black 10 spoke mst wheels offset 9 , one wheel has three spokes broken . tyres are mst csr with a purple dot and are like new . £30 delivered for all of them through PayPal sound fair ? Steve

For sale on this forum in the classifieds mate . will list on eBay next week if it doesn't sell Steve

May well sell the extra wheels and tyres , i would rather keep hold of the spares at the moment though to see whether the rest sells . Let me have a look to see what's exactly there , I know are least one wheel is missing a spoke and one set of tyres has been used on concrete although not on this chassis . then see if we can come to a deal

Mst ms-01d vip ii Flysky gt3b to + rx modified firmware and lipo conversion 2 x turnigy hardcase lipo batteries 5800 mah Savox servo 1251 Yokomo s14 body Speed passion reventon sensored brushless 13.5t Imax b6 charger Camber gauges , ride height guage Various spares , belts , bearings , wheels , tyres , turnbuckle , anti roll bars etc etc Everything in very good condition apart from flysky controller which has been hydrodipped and painted badly in white but works perfectly . everything needed to get started apart from power adaptor for charger . Looking for £450 ono collected from reading , can box up for collection by courier if required or can post at buyers expense if you find someone that allows postage of batteries no problem . Any questions feel free to ask Steve

I was thinking somewhere around 400 wouldn't be too painfall to take as I've had quite a few hours fun out of it . Will probably stick it up on eBay for a little over that with best offer and see what happens . Will have to charge the batteries to make sure everything everything's working as it should , who knows maybe I'll find some new enthusiasm

Not at the moment mate . Not 100 % I want to sell yet but would prefer to sell as a complete running package if possible.

These are the only couple I have at the moment Steve

Sadly have not really used this much so thinking of listing on eBay and wondered what sort of price I should be asking for ? Mst ms-01d vip ii Speed passion reventon 13.5t sensored brushless set up Savox 1253 servo 2 x turnigy 5600 mah hard case lipo Flysky gt3b tx + rx , modified to take lipo which is included and modified firmware B6 battery charger , balance leads etc Yokomo s14 shell in good condition Few sets of wheels, tyres , springs , bearings , belts , anti roll bats, turnbuckles etc etc Everything is boxed and in pretty much new condition , has been put together nice and tidy . The gt3b controller is pretty ugly, has been hydrodipped and painted white and the body has a couple of small scuffs but apart from that all very tidy . Everything I bought brand new except the flysky bits so has obviously cost a fair wedge to put together , any ideas on a value ? Nothing on eBay or the classifieds to compare to at the moment . Thanks Steve

another mst

is that the one from hobbyking ? i did look at those but could'nt find much info on them . i got the reventon r 13.5t for

oh no hopefully not , at least i can get another locally if the 26t does not fit . took me ages searching yesterday trying to find out what size pinion size i needed and did find a thread on drccentral where one of guys from soul says that a 24t -28t is used with the standard 88t spur . theres also a chart posted in the thread that seems to say the same so hopefully it will be ok . thanks steve

nice driving i cant wait to get this built up now , got the reventon r 13.5t combo ordered and hopefully everything else should be here by the weekend . it was a

great just what i wanted to hear . is it the "r" you run in an fxx ? i think i have read your thread as i had my heart set on the exact same chassis until this ms-01d popped up at a good price . the reventon r 13.5t combo is the model i'm looking at on ebay as you say . one of the sellers is just down the road from me and carries savox 1241 servos so i could pop over and pick both up at the same time and get a bigger discount hopefully . i'm just waiting to hear back from him confirming it has the silver esc rather than blue . so you happy with the performance in both chassis , smooth , reliable , enough power ? what gearing do you use on the cs sakura ? thanks for the help steve

hi , i have a an mst ms-01d vip ii on the way to me and need a motor and esc . having never owned a brushless setup before , i've been doing some reading and over various forums and seems i need a sensored setup somewhere between 7.5t - 13.t turn . i'm planning on using 1.82cs and will be running on carpet in a fairly confined space approx 7m x 3m mainly for the moment . the chassis looks too nice to run outside on asphalt but i might if i fit a protector and can find some smooth clean concrete locally . i'm within driving distance of both soul rc and wycombe so would like to visit both at some point . i see most people run 7.5t - 10.5t and then quite a few are then turning down the punch and throttle by some quite high % and wondered what the advantages of doing that rather than running a 13.5t or even a 17.5t . from my understanding these will be smoother as well as having better run times or do these just not have enough power for larger tracks ? i've put a wanted ad up on here so will see what comes up , but with the chassis turning up middle of next week hopefully . i'm pretty keen to get everything here and built up ready for use so am also looking at new combos . so far i'm looking at the rc omg combo in 10.5t or 13.5t or speed passion reventon r , s or pro in 10.5t or 13.5t . any others to consider or better options ? thanks steve

hi , i am looking for a smooth sensored brushless combo around 10.5t and a good quality fast servo to suit a 1/10 mst ms-01d vip ii drift car . i'm a bit ocd with things matching so if they were black , anodised red or grey to match the carbon that would be perfect why ? price posted with fees etc included to reading berkshire please or can collect if near enough . cheers steve

any offers ? not much interest as a whole so may consider splitting

up steve