coolas4k

... ...

Sold, please close

Not yet. If you have any further questions, message me privately please, thanks

*** Genuine Losi 5ive-T roller *** I bought this truck as a roller from brand new. It's not had much use as you can tell from the lack of wear to the drive cups/ pins and underside of chassis and certainly hasn't been abused. It's a very clean and well looked after truck. A lot of the plastic parts have had very minimal use due to being replaced with upgrades shortly after purchasing the truck. The panels are in good condition with just a few dents and marks as expected but no major damage. The cage is in great condition, no broken pieces. The panels have a custom designed vinyl wrap which is in good used condition with a few minor scrapes but still looks acceptable. It comes with original box, instruction manual, stock clutch bell with carrier, stock air filter, 19t engine mount inserts, 3000mah 6v rx battery and a few additional upgraded parts as follows; - Red springs at front, Orange at the rear - Metallic blue shock covers - Hot Racing anti-roll bar kit including alloy bar holders - FID Racing - 4 Disk/ 6 Pad Brake System plus spare discs - Silverback Mercenary wheels as good as new, only used for one outing - Silverback HD beadlocks, brand new - Alloy enclosed wheel nuts - Rear axle mud guards I'll throw in a load of other odds and spares too (see pics). Requires engine system, servos and radio gear. Price is SOLD collected. I may consider posting within the UK ONLY if I can find a suitable courier as the box is huge and will be very heavy. Postage costs and PayPal fees will be at the buyers expense. IF YOU HAVE ANY QUESTIONS, PLEASE MESSAGE ME PRIVATELY, THANK YOU. upload pictures

... ...

...

All prices include postage within the UK but if you choose to pay via PayPal 'goods', please cover the fees. Any questions, please contact me privately. - Area RC alloy enclosed wheel nuts, mint condition = SOLD - NRP billet aluminium diff case = SOLD - 1x Hostile MX Nightmare tyre, moderate wear but still plenty of use left = £12 - 4x Outerwears shock covers. Small holes in 2 of them (see pics) but nothing major = SOLD - Chassis apron mud guard with all fixings. A small 5mm split on one guard (see pic) but will make no difference to protecting your chassis as it still overhangs the side pods adequately = SOLD

Sold please close

I won't split the motor on its own but I'd be willing to sell the following items as a bundle for £950 posted; * MGM Controllers TMM 25063-3 X2 series ESC * Lehner LMT 3080/6 motor + 16t pinion * USBCOM5 + CC11 cables for connection of ESC with PC * External capacitor pack * Motor temperature sensor * Custom power switch * ESC Mounting bracket * Instructions manual

* MGM Controllers TMM 25063-3 X2 series ESC * Lehner LMT 3080/6 motor + 16t pinion * MGM Conversion kit including battery tray with billet holders and velcro straps + billet motor mount * USBCOM5 + CC11 cables for connection of ESC with PC * External capacitor pack * Motor temperature sensor * Custom power switch * ESC Mounting bracket * Instructions manual Everything is in excellent condition and perfect working order. Only 7 months old with only around an hours worth of use max. I still have receipts to prove when I bought it. I haven't had enough time to use this hence the reason for selling it. It is a serious premium piece of kit capable of propelling your Losi 5ive-T with up to 15s of lipo power. Everything will be sent fully insured and tracked but collection is welcome from DY3 area. £SOLD. Any questions, please message me, thanks *** The Losi 5ive-T truck in the photo is NOT part of the sale. It is used to show what the kit looks like in the truck ***

I've never experienced this on my Baja before or any rc for that matter. It must occur when the thread of the plastic is quite worn and loose then

I almost ruined the thread the first time I tried 'unscrewing' one of these silver bolts, what's the reason for them over the normal right hand screw bolts? I can't fathom a reason for them

Hey Gary, I know it's been a while but found your thread whilst researching hybrid builds and it looks well impressive from the pics but for some reason I can not view the videos on the links. It says the content is no available or something along those lines. I don't suppose you have a YouTube link for the videos or even current ones assuming you've still got this beast?

... ...

Nice one

Which Hitec one is that?

I hear the Hitec HS-5245MG are one of the best servos for a direct fit. Anyone else running them on theirs

...

I completely agree mate, I'll never have one again. Next time, I'll either go down the sticker route on top of a single colour shell (cheap option), a homemade spray job (moderate cost but unpredictable finish) or a proper pro spray jobby (salary sucking)... Choices choices

Why thank you lol although the wrap on the shell has seen better days now if you saw it up close

Thanks Zannu Yeah I'm well pleased with it now. I was never happy with it when it was powered with the OBR 32 reed engine even though it was relatively quick. I think the 4wd system zapped too much of the power for my liking plus the unpredictable fun of my petrol powered Baja always outshone it.. But now it's much more responsive and torque bound as brushless so I'm equally as happy with it compared to the Baja now

My oh my!! Managed to give it the maiden run this morning and I am well impressed albeit the ground was very wet and mossy so couldn't really put the power down properly. It was ran on 8s with 2x 4s 70c 6750mAh Lipos which lasted approximately 13 mins. Temps after the run for the motor and ESC were in the 30 Degrees range but the Lipos reached approx 60 degrees which was more than I'd have liked. To be fair, my trigger finger was pressed down near enough the whole time but I couldn't help myself needs a little bit of tweaking with the ESC settings and I want to review the black box info hooked up to the PC but all in all I'm grinning like a Cheshire cat right now! Anyway here's a short video of its first run

...

Ah OK, I'll keep mine as it is then if there's no real benefit. Have you encountered any faults or problems with the ESC or motor at all? I'm impressed with the 3 year warranty with ESC, that also shows they're built to last in my opinion if the manufacturer is prepared to cover any faults for that length of time

That's a right beastly setup I'm not surprised the tyres couldn't cope Not overly keen on that motor wires adaptor looks wise but is there any benefit to it apart from reducing the amount of wires on show?