Strada mt 83

+1 for the vrs. My mate just sold his after 4 years . It was a 54 plate . Had 46000 miles Great car if u like the looks, drives better than the astra an miles better than any 207. That's my 2 sense anyway lol --- I am here: http://maps.google.com/maps?ll=51.897558,-0.388572

First was a 1.1 205 Then three 1.0 novas lol A 1.2 nova 205 gti 1.9 with a 150 bhp lump( went like stink) Another 205 gti with same lump A celica st160 A mk 3 three litre supra( loved that car, drift everywhere ?) And now I have had an a reg chevette for past 5 years and Which is now running a 1.7 ford xflow --- I am here: http://maps.google.com/maps?ll=51.899254,-0.386561

ANY THOUGHTS PEOPLE. ALSO WOULD IT BE COVERED UNDER WARRANTY?

if its the motor, wot should i replace it with, or if its esc shoulkd i uprate. any help welcomed

can manage to get motor to spin if while i pull the trigger i spin the pinion, will spin fine untill u stop , then i wont move till u start it spinning it yourself. take it this implies motor is kapupt, am i wrong

took the strada apart, the motor makes many squeeks and chirping . sometimes will spin other times will just shoulder, any thoughts? i figure either esc or motor its the standard brushless esc and motor. please help

Got a problem while out just now with my atrada mt evo s an All was running fine. Except brake seemed bit poo. Then all of sudden it stopped. And if u use the throttle it just beeps and shudders. Red light on esc lights up and or flashes. Wots do i do ? Had just replaced shocks was alloy ones to. Barely got to test them. Doh

Solved the pin issue. Bloody lil grub screws coming loose. Silly me. Still could do with thought on the camber issue. Ta --- I am here: http://maps.google.com/maps?ll=51.899393,-0.386710

I new the pins came out cause It spat out both rear shafts leaving the wheel stub still in the bearing --- I am here: http://maps.google.com/maps?ll=51.899258,-0.386558

Hi guys hoping for a lil info an help I ordered some of the uprated drive shafts , hsp ones of black smith products. Problem is they fit however seem to long an when the lower arm goes up its pushing the shaft into the diff???? Only way I found to cue this was to put loads of positive camber on. Which can't be right. Surely any help appreciated . Also the metal pin which holds the uj joint together keeps falling out to ?please help . U Its driving me nuts

Bit off topic. Jenny. Wot wheels are on the blackout mt. The truck looks like my strada mt and im looking for wheels

Hi I got the strada my evo s last month.. I put some 2 s lipos in it an it flys now. Thats my pennies worth any. Cheap option and then Ur already on lipos for another motor at some point.

Any thoughts on a cheap brushless combo for? Not fust bout loads of power but something to give the girl a bit more pace. Cheers --- I am here: http://maps.google.com/maps?ll=51.897530,-0.388752

I did wonder that. Is there no way of getting a longer lasting one in there? Also probably a very noob question but the rage I got was second hand with no controller , the receiver is a 27 MHz am an takes a crystal . Can I use an 27mhz transmitter with matching crystals ? Cheers --- I am here: http://maps.google.com/maps?ll=51.897660,-0.388808

If anyone has used lipos on the brushed motor. Let us no wot it's like an wot lipo ur using cheers and how long it will last --- I am here: http://maps.google.com/maps?ll=51.897546,-0.388787

Got one of the buzzers spare. Got one on my strada. Cheers for the links mate. Nice one --- I am here: http://maps.google.com/maps?ll=51.897660,-0.388920

Hi guys got my missis a lil xtm rage to play with to stop her using my strada lol. It's a standard brushed version How can I get more run time out of it? Can I use a lipo? Space looks tight. If so wot ones would be good an cheap? Cheers guys any help appreciated

Motor fan is sorted as is the low voltage buzzer? Does anyone do hub extenders to suit the strada mt with 12 mm hex --- I am here: http://maps.google.com/maps?ll=51.899262,-0.386555

Any one any thoughts ?

Do they do such a thing as hub axle extenders so I can give it a wider track???? Cheers. Also ordered a fan for the motor an wondered how to wire it in. Where is best? Low voltage buzzer turned up so thats on now for some peace of mind.

Hi This may be a silly question but here goes Just received some alloy 12mm hex things for my strada mt. Fitted them fine however their is now some in and out play on the axle stub. The pin locates in the hex fine but seems like the recess isn't quite deep enough. Wot should I do or is it fine to run like that? Cheers --- I am here: http://maps.google.com/maps?ll=51.899285,-0.386588

Guess mainly mud / gravel . Hoping for something with more chunky tread . There out of stock of the universal drive shaft? any others supplyer do them? Many thanks for the help --- I am here: http://maps.google.com/maps?ll=51.899262,-0.386555

Wot tyres would be better finding it needs more grip lol . Guess wheels an tires would be good --- I am here: http://maps.google.com/maps?ll=51.899258,-0.386558

Sweet will go on that now as just been out with it and bent a drive shaft lol. Got it wheelie ? lol --- I am here: http://maps.google.com/maps?ll=51.899258,-0.386558

Sweet. Nice one mate ? Oh another one lol, did I read right that the hsp brontosaurus was the same truck so could use alloy bit for that truck . ? Or did I read wrong --- I am here: http://maps.google.com/maps?ll=51.899262,-0.386555