stevek32

or i found this.... http://www.ebay.co.uk/itm/261148872352?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 its only 500mh so thats 0.5a if im correct?

So if I were to get an eflite charger where can I source the lead? I know the Lipo from the husband has a Molex connecter but what is the connecter for the eflite charger?

so any links guys?, bog standard lipo is 2400mah 3.7v now its only 1s....... so a 1amp would be ok? but 5v?? does anyone know exactly what a pc usb kicks out? volts and amps, and are all the same?.....

so any standard usb wall plug is ok? like this for example..... http://www.ebay.co.uk/itm/BRAND-NEW-GENUINE-3-PIN-UK-USB-WALL-CHARGER-ADAPTER-PLUG-FOR-iPOD-and-iPHONE-/320859209198?pt=UK_MobilePhones_MobilePhoneAccessories_MobilePhoneChargers&hash=item4ab4b2fdee

Hi all. Just wondering what I can use as a replacement charger for my hubsan x4. Fed up with having to power up pc to charge the hubsan. Is there a USB replacement wall plug I can use?. My phone mains plug is USB can I use that? Or is the output voltage to high?. Or does the hubsan USB lead regulate it?. Any help.....

Hi all. In the near future I'm thinking of getting a 450 size clone, can't afford a align etc so been looking at hobbyking for inspiration. But what would u all recommend?, also hardware like: 1, gyro 2, motor 3, esc 4, cyclic servos Any help guys, I know its not a cheap hobby but I don't want to throw huge amounts of cash at it and be to scared of flying it incase I crash it many thanx....

upgraded to rakon head unit and swash , the little begger just turned super sonic pitch has increased huge amounts recommended upgrade to all. nice engineering just a shame it cost as much as the heli i recommend here for parts http://store.blinghelis.com/index.php/heli-parts/e-flite-blade/msr-msrx.html now just toying with the idea of putting the mcpx tail on it to see if that mellows it out at all?

ok thanks guys i will check all the above but i have since broken the blade grip pinion ball..................duh ..... ive ordered the rakon grips now but will i have to get the other rakon gear with i???t, i.e rotor hub and swash etc?, just when i thought i was getting the hang of it outside, it bit me on the a~~e, lol did a loop then another then went for high speed fly by and panicked at the fast aproaching tree tried to steer.... panicked fumbled the control and dropped it on full forward tough little heli tho, skids and blade grips were the only damage,

yep end cap still in place, took it out this morning and even tho it is noisy its flying ok....ish?, it occasionally piros on take off but seems to sort itself out, puzzled by this one,

Hi guys I have bought the above and flown it 6 times only had an impact with a table not high speed but since then rear tail motor is noisy and heli won't fly, nothing is broken or loose and tail motor works but not as it should I.e on lift it piroettes then slide off in one direction is the motor shot or have I damaged board?. It's on a stock tx if that makes any diff?. Any advise pls........ Thanks

ok bit the bullet and went for this http://www.fast-lad.co.uk/store/e-flite_blade_combo_blh3200-p-17834.html not a bad price just need to save up for a dx6i, what are the best upgrades for this little heli, ive been looking around and swashplate seems an obvious choice, but i dont want bling more interested in performance, any advice pls guys

thanks guys, i think i will go down the msr x route it sounds a trickier beast to fly but patience is a virtue.... or so they say, i did buy a hk 450 once that i built but never flew, as to scared too, not because of the crash damage but because i made a stupid mistake once where i didnt check the throttle control when i plugged the lipo in..... several carbon fibre cuts to my hand and legs could of been alot worse, but it kinda put me off and i sold everything.... but the msr looks like its a close comparable with the controls but without the pain...

Toilet bowl affect?. Thanks for the replies so far guys.

hi everyone, just a quick one really, the better half has said santa can bring me a micro heli, so ive been researching and e-flite blade seems to be the manufacturer of choice, now im stuck as to which model, im torn between MSR or MSR-X to me as a newbie which is easier to fly the flybar msr or flybarless msr x, i have flown those silly little

cant take a

Brand new, boxed with instructions Ezrun 150a ESC bought this about a month ago new and never used it bought a 2nd hand combo instead was going to use it as a backup but need to scale down on parts, sold........... thanks guys ebay seller feedback stevek3222 (genuine seller)

ok thanks, perhaps i,ll put it up for

hi all just testing the water really, i have a brand new ezrun 150a esc and thinking about flogging it i paid

Hi all I have a prob with the fan on the xerun 150a esc, when I power on the fan really screams. Like a dry bearing noise it does go but only after about 10mins is there any thing I can do to solve it?. Didn't fancy putting wd40 on it.

Just as an afterthought yes u are right NEVER move mid range needle. But if u do buy one 2nd hand u can easily check mid range by removing hsn and look done the hole u should be able to see the msn if its correct u will see a tiny hole on the msn shaft bang central in the hsn tube, if not just turn it slightly either way until u get the hole dead central. NEVER turn it a full turn tho needle must stay flush but even a 1/8th turn off central will cook your engine. Hope this helps

Lipos sold bag still up for grabs

sensible offers?

come on guys these are a real bargain

Size 139 x 46 x 26mm