Jefferson

Bump

bump 2 left - will sell for £10 posted the pair

bump

Hi, in between postings I have been offered full asking. Awaiting payment in the morning, if for whatever reason that doesn't happen I'll let you inow

Hi, single model memory only for the dx2e

thanks for the offer, with respect I'll decline as the extras with this (cnc parts, wheels, spoiler, lipo packs, screw kit, esc and better radio gear) make this a great deal at £140 inclusive. Thanks

OK thanks, I'm also in and out for the day so will mull it over a little and come back later

cheers, felt it was priced quite well. Likewise, I don't think it will come to parting it down (I don't have the time)

hi there, the battery retainers can be put back - easily done with the 4 screws/bolts in the bag - a two minute job. However, if you were to put these back then the esc would need to be moved back to the top deck. There is no damage to the buggy, just one or two minor scrapes on the chassis. All that is needed to make it fully rtr would be a suitable lipo charger. In terms of pricing, ideally I'd like as close to asking as possible but feel free to make an offer thanks

still available & not sure what happened above with the quote

thanks first post edited - collection from colchester in Essex

Can do them for £14.50 posted

Nope, still available. First pm was re a poss trade p/ex but this is sale only

think I managed to do it via my mobile, extracted from photobucket then added via phone - or one of us has, thanks

thanks first post edited - collection from colchester in Essex

hi, I couldn't embed them so uploaded to photo bucket as that worked perfectly. I can try again but kept getting error messages

I'm selling up, so have the following package for sale.... This is an almost ready to run package, which includes a buggy, brushless combo, radio gear and 4 batteries (3 lipo), some hop up parts and spares. Full list further below. Up for sale is a 1/14 lc racing emb 1 (h variant buggy), this is the version with all metal parts Inc chassis plate, suspension uprights and tunable alloy shocks. OK, here is what is included in the sale... 1) lc racing emb 1h buggy (complete) - with red cnc spindle carrier, red alloy/cnc hex's (for wheels) 2) Spektrum dx2e radio and Sr210 receiver - upgraded over original radio gear 3) batan servo - originally with buggy 4) brushless motor - original one 5) 60a turnigy esc (upgraded) 6) 3 x lipo batteries (1300 mah zippy 20c discharge) - each used no more than 6 times 7) original battery and charger (unused) 8) t-bone racing front bumper (fitted) 9) t-bone racing skid plate (not fitted) 10) 1/10 buggy tc wheels (hpi ones and fitted/seen in pictures) 11) originally included wheels and tires (seen in picture) 12) larger spoiler (fitted) and original spoiler (in picture) 13) shock oil 14) thread lock 15) tool kit including eds driver 16) spare screw kit - official one 17) spare rubber parts for body clips 18) spare plastic spindle carrier and plastic hub nuts 19) speedo fan and switch 20) spare screws (more) and numerous heat shrink parts The buggy has had the following tweaks.... 1) Spektrum receiver placed between servo and motor with on/off switch on servo 2) (improved) turnigy 60a esc fitted to bottom deck at rear of chassis 3) battery retainer posts and strap removed (included in Bag) 4) space for 1300mah battery on chassis (as pictured) 5) velcro on chassis and battery packs (to Secure) 6) velcro on chassis sides to secure shell 7) red cnc spindle carrier 8) red cnc locking hex's 9) crush tubes fitted 10) shims fitted this is a great package, but due to lack of use (once in 14 months) it is best to move it on and let somebody else enjoy it everything is in excellent condition and works perfectly postage is with interlink and will be £20 - due to the size of the box and adequate insurance required buyer to pick up paypal fee's I am after £120 excluding postage, bear in mind this is the "better" model, has some cnc parts, an upgraded esc, 3 lipo and upgraded radio gear!! Collection welcome by arrangement cheers Link to pics.... http://s842.photobucket.com/user/dimmockg/library/LC%20Racing%20Buggy

it is indeed, drop me a message

as per the title, have a 35a esc removed from an lc racing emb-1 this has only had about 6 packs through it, the wires to the battery have been shortened and re-soldered to make things tidy and shorter (covered with heatshrink) - performance not affected at all small footprint esc that can be squeezed in tight spots! link to photbucket pics.... http://s842.photobucket.com/user/dimmockg/library/Speed%20Controller after £10 + postage (£3) - so £13 all in exc fee's i'm selling up and will be listing a few bits

as per the title, have 2 turnigy lipo packs for sale these are all: Spec. Minimum Capacity: 1700mAh Configuration: 2S1P / 7.4v / 2Cell Constant Discharge: 20C Peak Discharge (10sec): 30C Pack Weight: 92g Pack Size: 91 x 26.5 x 18mm I have removed the original connector and put bullets on - cables are approx. 5cm long photobucket photo's.... http://s842.photobucket.com/user/dimmockg/library/ actual item: http://www.hobbyking.com/hobbyking/store/__15088__Turnigy_1700mAh_2S_20C_Lipo_Pack_Suits_1_16th_Monster_Beatle_SCT_Buggy_.html these have had circa 6 or 7 charges each, never charged at greater than 1a and never over-discharged, always balance charged as well. Each one in superb condition and Velcro attached to hold securely when in vehicle listing these at £5.35 each including postage (exc fee's) - or £10 both posted i'm selling up so will be listing various bits

as per the title I have a core rc uac 50 charger for sale this comes fully boxed, with power lead, balance board, instructions and an array of leads has hardly been used and still has the protective film on the screen £30 + postage (which would be £4.45 using royal mail 1st class), so £34.45 all in (exc fee's) pics on photobucket.... http://s842.photobucket.com/user/dimmockg/library/Core%20UAC i'm selling up so will be listing all manner of parts

Rx, tx and servo arms sold

Up

Some further reductions, need to shift this lot

Up