NOFX
-
Posts
2,970 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Prizes
MSUK-Forum - RC Model News and Community
Articles
Events
Posts posted by NOFX
-
-
https://www.componentshop.co.uk/7-4v-120mah-15c-continuous-discharge-lipo-battery.html. I've emailed them to ask when they'll be back in stock. If everyone who's after the lipos emails, they might get em in quicker 😊
-
1
-
-
Lower the c of g. Can you make the battery tray lower?
-
https://www.robotbirds.co.uk/lipo-nimh/lipo-packs-2-cell/0-1000mah/2s-0120-30c-gens-ace-lipo.html.html. I found these, but they're on back order.🙄
-
Hello 😊.
-
1
-
-
Have you dropped the battery tray onto the spur gear cover? That's good for lowering the CofG & preventing roll overs
-
Where are you getting the lipos from? I'm after a few 120mah ones, but can't find them anywhere that'll post em to me 🙄
-
I took the xo1s shocks apart ,lubed em & took the small spring out to give it far more articulation. & I'm spraying the roll cage eye blistering orange. It's drying above the cooker as I type.
-
If you're on Facebook, have a look at "Orlandoo builders guild". There's loads of hints on there. Lubing up the shocks helps. I used graphite oil that I use on my mountain bikes chain. Tiny4x4 is the place to go for hop ups & spares. They've got the best customer service I've ever seen 😊
-
1
-
-
36 minutes ago, mydoddy69 said:
Where did you get your T0002 esc from can’t find them in the U.K. I wanted that one from the start as it’s super small
This chap has given me some good tips as well
The DooRok is my next build 👍 Followed by the Ibex when it gets released, think I’ve caught the bug well and truly again now 👍😂
-
1
-
-
The me5280 shocks with the little spring removed are a good hop up. Wheel weights in the front make a hell of a difference too. I'm half way through building my 2nd one. The doorok from tiny4x4 is excellent. I've just ordered 2 of the T0002 ESCs because the space inside the xo1s is a bit errrrm limited.🤣
-
1
-
-
54 minutes ago, mydoddy69 said:
I ordered these
https://wheelspinmodels.co.uk/i/305459/
Im hoping by decasing everything else I’ll get them in if not I’ll more than likely go the 1s in series route 👍
I've decased the Rx . But the Xo1 cage is so tight that the 180mah battery lead pokes out the side 🙄
.
-
It's a right pain in the bum🙄. Tiny4x4 are trying to find a company that'll ship lipos that ain't "in a device". The 180mah lipos I've got barely fit in the Xo1 because of the electronics. Loads of people are trying to get hold of lower mah lipos for them. I ordered 5 from bangood "UK". But the lipos are in China & they won't ship them to the UK 😡
-
I finally got the neon orange paint for the next Orlandoo xo1 roll cage. I ordered it over a week ago with next day delivery 🙄.
-
17 hours ago, mydoddy69 said:
Got any pics of your builds fella I’m super tempted to buy one 😂
I can't post pics for some reason. I've tried several hosting sites & still can't 🙄
-
1 hour ago, mydoddy69 said:
😂😂 You got to be a brave man to tackle it that’s for sure 👍
I'm 3/4 the way through building a 2nd Xo1. Excellent little trucks. But getting all the electronics in the cage is a pain in the bum.
-
I put together the links for the Orlandoo xo1 at about 4 this morning. My gods it's a tedious job 🙄
-
28 minutes ago, Iain .R said:
Well the car went out today I stayed in lol it's faster than my carnage and bit wide bounching about over bumps well I got a bit distracted and crashed it yea yea (only a wee bump) only then I noticed that the body over laps the front bumper which if it was a full on crash I'm thinking that the body which is fixed to the roll cage will move back which the roll cage is sitting.on the shock tower the VERY thing posts will.snap .
So I'm.asking has anyone done this had a crash and snapped these if so I guess alloy ones as replacements
Is there any way of extending the bumps on the ftx outlaw forward so the body sits behind the bumper NOT in front of it cheers
The only thing I've snapped on the outlaw is the front body post. But that was when our little un drove it off a 80ft rock strewn drop.
-
1
-
-
Hello 😊
-
Looks alright that 😊
-
Take the electronics out & dry them out on a radiator. That might sort it out.
-
Anyone know where in the UK I can buy batteries for the Orlandoo xo1 ?
-
Appy Xmas Nick. & Thanks for running the best RC site on the net 😊
-
I've never had a problem with it eating pinion gears. The outlaw's a really good truck for the money. If you Google " Ultra4" you'll see what they're intended for 😊
-
I've ordered 2 es9251 servos. Hopefully I'll get the one of the xo1s running at the weekend 😊
What did the postie bring you today?
in General RC
Posted
2 sets of 28mm shocks for the micros😊