Reckless_engineer.

Sorry not looking for swaps(unless you have a garage of mini parts lol) I will split if theres no look as a job lot over the weekend but i dont really want to go as far as pulling the upgrades from the chassis.

So its time to let my dream truck go to a new home that can abuse her properly!!!! I decided i would build my dream truck with no expense spared but i cannot bring my self to abuse her like she needs lol. After spending over £1000 on her she has had 2 runs in the warehouse at work and has been shelved ever since. Everything in the pictures is included including charger,batteries,tools EVERYTHING! Everything is practically brandnew as it was bought specifically for this truck ( exept the trenchers and spare roller) so is as new if not new The batteries have had 1 charge each and been run through the truck once. I have just had 5 minutes with the truck on the road and everything is still perfect. The truck cost me in excess of £1000 to get to were it is and if you promise you can abuse here properly i will take £350 if you cover fees PLUS Postage (theres alot so it may not be cheap) Id rather you collect it (s62 7AA) The truck is a hongnor scrt10 with the following parts(i cannopt remember everything that went on the truck so the list may not have everything - Tekin RX8 ESC Can take anyhting you can wire upto it lol. Tekin SC4X 5.5 turn motor (tekin hotwire included) Savox sc1256-TG servo spektrum DX3.0 Radio gear Overlander hardcase 2's lipos 5000mah 25c. They charge to 6500!!!! these put my turnigy batteries to shame!!! x2 Strc aluminium upgrades- I think every strc part is included although there is 1 or 2 i never even got around to fitting!! Carbon front shock tower and body mount Carbon rear body mount front upper Arms changed to traxxas links (cheaper, stronger and easier to get hold off) Upgraded to CVD'S all round lightweight metal spur and spare centre diff (not fitted) De racing rims with proline trenchers and hub nuts (were used on my slash before still 90%+ tread) De racing rims with slingshot sand tyres (still not finished glueing them on) brandnew proline bowties premounted to proline rims Brandnew 2 body shells There is also probably 95% of a full spare 2nd hand roller included as i bought a roller for spares(it's in bits but most should be there as i didnt really break much with 2 15 minutes runs lol) Theres 3 bagged sets of A arms and 2 rear arms (plus the ones fitted to the spare roller) Spare upper front arms loads of bearings ect ect A boxed HPI REACTOR 500 charger Boxed. Shock oil and diff oil. Oh and a set of ed's drivers

sold to the man above

Not at the minute no. I had some little t***s run over the roof of my mini so need the cash to to sort her out. I will take

Up for grabs is my traxxas slash 4x4 ultimate roller. Includes everything in the pics. I will throw in the losi radio gear and servo as a freebie so all you will need is motor,esc and wheels. The shell is a bit tatty as can be seen but does what it needs to and ive seen far worse on a slash lol. The roller id fitted with rpm as follows A-arms all round Nerf bars front and back shock towers front bumber rear body mount Being the ultimate the all the hubs ect are aluminium and big bore shocks as standard The rear hubs are also blue aluminium traxxas jobbies. Included is a few spares ioncluding a-arms,rear hubs spare springs, shock parts RC GLOVE ect It will come in the original box with all manuals. Im looking for

Ive got a slash 4x4 ultimate roller with rpm parts all round for a bargin price. I can throw in some radio gear too.

Set 5 is the last set i have at the minute

Anyone fancy the roller complete with the wheels centre diff and all the spares pictured for

Ive got a traxxas 2.4 link rx and tx set for sale

Batteries sold to meekster shell sold to gruss proline shocks sold to gruss esc sold to big gaz motor and servo sold to the rat

Ok ive had about 15 private messages in the past 10 mins asking for prices so a few quick prices. Motor,fan and esc

Will do

A full set of 21 boca bearing yellow seal ceramic bearings for the slash 4x4. They were fitted to the slash,ran down the street then taken out as i was going to the beach. They have been ever since and are as new. I will include the original reciept for $105 plus $15 shipping then a £22 royal mail charge. In total they set me back £98!!!! If you bought them from boca and didnt get a customs charge there going to set you back £75!!!!!! I will also include the mouse mat boca included as a freebie. Im looking for £35 posted if you cover fees Bargin!!! Up next is a kindheadz motor mount again it has hardly seen any use and definatley no abuse. It inlcudes 3 spare bearings and an aluminium slipper bearing adaptor. Again i will include the original recipet for $56.48. If you were to buy new from kingheadz without a custom charge it would be at least £35. Im looking for £22 posted if you cover the fees. And finnaly is a tekin hotwire pc interface. I payed £30 a few week back and have used it once top program my rx8. It is still in original box and is as new. £15 posted if you cover fees. Thanks in advance Tom.

Like i said in the pm, I have logged on and noted i put the sheets in the wrong parcel!!! The replacments have been sent. Glad to see you post trying to bash me but not to say i included next day courier FREE OF CHARGE. Mistakes happen no need to make me out to be something im not.

Just the one set remaining now. I also have 1 set of the smaller squares left.