[How much is my losi worth]

Someone give me 1k and you can have it. ?

[How much is my losi worth]

Cheers. I always feel as I'm asking too much when I try n make prices up. They sound reasonable . Thanks.

[How much is my losi worth]

Would it be a big difference selling it in bits? I wouldn't know what to value the parts at.

[How much is my losi worth]

http://s1259.photobucket.com/user/kkppww91/library/

outerwears pre filter and pullstart filter
Savox SV0236MG (.17/40Kg) Heavy Duty Jumbo Metal Geared Servo 40Kg
Savox SV0235MG
DDM Piston Stopper For CY/Zenoah
Turtle Racing v2 Billet CY/RC Starter Assembly
DDM Billet Gas Cap
Outerwears Losi 5ive-T Shockwears
Turtle Racing HD Chassis Braces
DDM Racing Aluminum Front Top Chassis Brace
LOSB 2581 5ive-T Mud Flap & Retainer Set (2)
x1 TGN Losi 5IVE-T Mud Flap Savers
Modified RC Center Diff Mount Set
Team Hoonage Steering Upgrade Kit
Vertigo Vented Clutch Bell
Turtle Racing HD Clutch Bell Carrier
Silverback RC '5imian' Losi Five-T Wheels
Bartolone 32cc Tuned Pipe
Hot Racing 54t Steel Spur Gear & 23t Pinon Gear
Hot Racing Losi 5ive T Throttle/Brake Servo Brace
Jofer RC Aluminum L-1 Engine Mount Inserts
Silverback Beadlock Screws
Silverback RC Lipped Inner HD Beadlock
Silverback v3 Lipped Outer HD Beadlocks
scott finley tuned g340 engine. ported and polished.

No tx or Rx included

[A few niggles and naggles on my 5ive.]

Oh and a question about gearing aswell.

I'm running the pro mx g340 with a Bart xp pipe. Still on standard gearing and diff oil.

Any one recommend what I should change to?

[Pitbull-RC inner wheel fenders]

I wouldn't mind some for mine aswell.

[A few niggles and naggles on my 5ive.]

Wire brushed exhaust today with my dremel. Can anyone recommend some paint for it?

[A few niggles and naggles on my 5ive.]

Can they bring them to polished finish aswell?

[A few niggles and naggles on my 5ive.]

My bartolone so pipe is in need of a refurb.

Was wondering if I could sand or wire brush all the black paint off and go for a polished look.

I have a dremel and all the polishing gear.

Is there any threads on how to do it?

[A few niggles and naggles on my 5ive.]

Found my standard steering servo out yesterday and tested it in my rx to see if it worked fine.

Turns out that does the exact same as my savox.

I'm guessing it will be my futaba rx after all

[A few niggles and naggles on my 5ive.]

Mines still driving me mad. Swapped my throttle and steering servo leads over today on my rx, seems to be better but still not great.

I've got over 1k of upgrades on my car so I don't want it stood due to this problem . Darn thing lol.

[HP rating of a KM 29.5 Ported Engine?]

I have a pro mx340 in my losi. I was wanting the most hp engines at first.

Glad I didn't because the promx is a lot more powerful than I was expecting.

that cy23 must be ported and polished lol.

[A few niggles and naggles on my 5ive.]

Never tried a power cap no. If they aren't expensive then it's worth a try.

I have orange rx's in my little park jet I built. Haven't let me down yet.

[A few niggles and naggles on my 5ive.]

I'll try that tomorrow.

it's my futaba rx from my 4pls

Hope it's not my rx as it will be costly.

Is the r304sb futaba rx 2c lipo compatible?

[A few niggles and naggles on my 5ive.]

I was going to open it up and have a gander. I know it will void the warranty but it's my 3rd one so heck.

Hope it's not my Rx that's the prob.

It's so frustrating lol.

[A few niggles and naggles on my 5ive.]

It like has a fits out though and glitches and locks the steering to the left for a few seconds.

[A few niggles and naggles on my 5ive.]

Oooooo I have second thoughts now lol

[A few niggles and naggles on my 5ive.]

They look good, have they got a good feedback. The savox ones have never been reliable for me.

[A few niggles and naggles on my 5ive.]

I can't thank you enough lol. Been searching a while but no luck, didn't know what to type in.

So that's when I went to bartolone themselves and they wanted nearly $30 for the part and postage.

Can you help me with another problem. Can you recommend a good steering servo that doesn't buzz and glitch out like my savox 0236.

Do hitec do a good sub

[A few niggles and naggles on my 5ive.]

A while back the rubber flexi thing with bolts either side that attaches the Bart Xp pipe to the mount broke.

It costs quite a lot for the part plus postage from bartolone themselves.

Does anyone know where I could get one cheap or build one?

I bolted it on with a single nut and bolt at the moment but it bends the mount and the exhaust touches the plastic side tray.

[New motor time.]

Ill try and upload some pics of it tomorrow. savox steering servo is still peeing me off.

[New motor time.]

with some hostiles fitted it would make a hell of a difference. in need of some taller gears aswell.

[New motor time.]

New motor has had its 2nd run today at clumber park.

The g340 is a beast of an engine with Plenty of power all the way through the Rev range.

Top speed is so much better even on the stock gearing.

My losi was hanging on for dear life when the throttle was applied.

[Scale plant and lorry shows.]

Nice one gaz.

[Scale plant and lorry shows.]

every time I go to clumber with my cars the park ranger always comes up to me to check my pass and then mentions the group with the scale lorrys. I've never seen you lot around though. Would be good to have a look and the rigs you are running