kkppww91

Someone give me 1k and you can have it. ?

Cheers. I always feel as I'm asking too much when I try n make prices up. They sound reasonable . Thanks.

Would it be a big difference selling it in bits? I wouldn't know what to value the parts at.

http://s1259.photobucket.com/user/kkppww91/library/ outerwears pre filter and pullstart filter Savox SV0236MG (.17/40Kg) Heavy Duty Jumbo Metal Geared Servo 40Kg Savox SV0235MG DDM Piston Stopper For CY/Zenoah Turtle Racing v2 Billet CY/RC Starter Assembly DDM Billet Gas Cap Outerwears Losi 5ive-T Shockwears Turtle Racing HD Chassis Braces DDM Racing Aluminum Front Top Chassis Brace LOSB 2581 5ive-T Mud Flap & Retainer Set (2) x1 TGN Losi 5IVE-T Mud Flap Savers Modified RC Center Diff Mount Set Team Hoonage Steering Upgrade Kit Vertigo Vented Clutch Bell Turtle Racing HD Clutch Bell Carrier Silverback RC '5imian' Losi Five-T Wheels Bartolone 32cc Tuned Pipe Hot Racing 54t Steel Spur Gear & 23t Pinon Gear Hot Racing Losi 5ive T Throttle/Brake Servo Brace Jofer RC Aluminum L-1 Engine Mount Inserts Silverback Beadlock Screws Silverback RC Lipped Inner HD Beadlock Silverback v3 Lipped Outer HD Beadlocks scott finley tuned g340 engine. ported and polished. No tx or Rx included

Oh and a question about gearing aswell. I'm running the pro mx g340 with a Bart xp pipe. Still on standard gearing and diff oil. Any one recommend what I should change to?

I wouldn't mind some for mine aswell.

Wire brushed exhaust today with my dremel. Can anyone recommend some paint for it?

Can they bring them to polished finish aswell?

My bartolone so pipe is in need of a refurb. Was wondering if I could sand or wire brush all the black paint off and go for a polished look. I have a dremel and all the polishing gear. Is there any threads on how to do it?

Found my standard steering servo out yesterday and tested it in my rx to see if it worked fine. Turns out that does the exact same as my savox. I'm guessing it will be my futaba rx after all

Mines still driving me mad. Swapped my throttle and steering servo leads over today on my rx, seems to be better but still not great. I've got over 1k of upgrades on my car so I don't want it stood due to this problem . Darn thing lol.

I have a pro mx340 in my losi. I was wanting the most hp engines at first. Glad I didn't because the promx is a lot more powerful than I was expecting. that cy23 must be ported and polished lol.

Never tried a power cap no. If they aren't expensive then it's worth a try. I have orange rx's in my little park jet I built. Haven't let me down yet.

I'll try that tomorrow. it's my futaba rx from my 4pls Hope it's not my rx as it will be costly. Is the r304sb futaba rx 2c lipo compatible?

I was going to open it up and have a gander. I know it will void the warranty but it's my 3rd one so heck. Hope it's not my Rx that's the prob. It's so frustrating lol.

It like has a fits out though and glitches and locks the steering to the left for a few seconds.

Oooooo I have second thoughts now lol

They look good, have they got a good feedback. The savox ones have never been reliable for me.

I can't thank you enough lol. Been searching a while but no luck, didn't know what to type in. So that's when I went to bartolone themselves and they wanted nearly $30 for the part and postage. Can you help me with another problem. Can you recommend a good steering servo that doesn't buzz and glitch out like my savox 0236. Do hitec do a good sub

A while back the rubber flexi thing with bolts either side that attaches the Bart Xp pipe to the mount broke. It costs quite a lot for the part plus postage from bartolone themselves. Does anyone know where I could get one cheap or build one? I bolted it on with a single nut and bolt at the moment but it bends the mount and the exhaust touches the plastic side tray.

Ill try and upload some pics of it tomorrow. savox steering servo is still peeing me off.

with some hostiles fitted it would make a hell of a difference. in need of some taller gears aswell.

New motor has had its 2nd run today at clumber park. The g340 is a beast of an engine with Plenty of power all the way through the Rev range. Top speed is so much better even on the stock gearing. My losi was hanging on for dear life when the throttle was applied.

Nice one gaz.

every time I go to clumber with my cars the park ranger always comes up to me to check my pass and then mentions the group with the scale lorrys. I've never seen you lot around though. Would be good to have a look and the rigs you are running