howie87

ive often wondered wht they don't come like that from the factory

not bad advice you trim the part down instead of buying an extra bit? works a treat

do you mean the shock brace? you need different inserts or just cut down the ones your shocks came with

easier yes but more satisfyiing to build it yourself

that is strange. i cant think of any shops that dont take cards. even the tiny hardware shop i used to work in could.

I had a look up its just the same miserable git with less stock than before

anyone been yet?

id leave the screws nd use dry wall screws. not pretty but will not come out

First off what's it going in then is your esc Lipo compatable?

I lost a tooth off two different 20t ones last year. It was on gravel the first time but just grass the second

it has a few different engines in it throughout the video first has a lambo badge on it. 2nd has a red top and 4 cylinders visible but it clearly a v8 by the sound so i guess Ferrari v8 the last is a flat engine which i would guess is a porshe flat 6. not that the last car looks much like the one at the start im also going to say i dont think you can call it a fiat 500 apart from the vague shape thres none of it left haha

Bump

Bump

you dont do jumping

no problem. ive done that many times myself haha

right in that case take off the gear cover and check the mesh between the pinion and the spur gear. there should be some slack between the two. fie a piece of paper and put it between the gears to set the mesh correctly

is it hard to move when the power is off? mine got stiff once after it landed hard on the motor and pushed the mesh together

have you checked your throtle trim? when the cars is stationary what colour led is on the esc?

ive got a revo 2.5? if thats any interest.

i just cant believe its 800 new.

Ok mate. Just assumed it was an option

bump

bump

i got this off a friend with the intention of keeping it but i prefer my savage so its time to go its more or less stock bar the alloy shock bodies. stock steering servos hobbyking alloy servo. im not sure on the specs but its more than up to the job home made alloy bumpers. i have the ez start wand ive just forgotten to take a picture. the motor turns the engine over but the glow plug lead is damaged so dose not work most of the boots have splits in the but seeing as no other car i know of bar the baja has them i havent seen it as an is it needs tx/rx and a receiver pack and a micro servo for reverse if you want to use it. looking for 150.