Sean

go to save as and change the type to JPG

I quite like nick crapping his pants at 6 minutes lol Shrink it in paint stebro, do you know what the size limit is?

This should be good enough quality for a profile picture

A little harder than I thought im afraid. Because it was filmed in DV widescreen when i try to export it as a frame it gets distorted. should be able to work around it when I have more time to play. Thanks for all the comments, video wouldnt have been posible without everyone that commited to the weekend.

Better quality one is there now (thanks for sorting the link nick) but its nearly 10 times the size so left the other there too if your having streaming issues

Buy me a HD camera and the next one will be easy ill sor it when I get chance I will try and sort the quality, may take a while as it took an hour and a half to encode at that.

Its abit long had nearly 2 hours of footage, i'd recomend putting it on full screen and sitting back for 12 minutes Enjoy! Low quality version for faster streaming

Ive put this on ebay, fed up of people making deals with me then messing me around. Sean

Any brushless motor will work with it but like matt says the lower the kv the better if you are planning to run 10 cells. 10 cells is 37V so a 5kv motor would theoretically get to 160,000 rpm with would almost cetainly destroy the bearings. But motors very rarley get close to the theoretical top speed anything below about 2500 should be ok on 10 cell But thats not the controller that is limiting it its that fact you would be running 10 cells. Sean

would anybody like to make me an offer on this?

bump

cant remember exactly about a year or two pretty sure its out of warenty so the receipt is no good. I have only used it in my hyper which i only used on flat surfaces mainly car parks. I got it to run my hyper at the Fast RC speed event last year but then failed to make the event after that I started converting my hyper back to nitro and selling off the electric bits. I was running it on 8 cell with a 7XL

with more cells you will draw less current not more I have no video but i wouldnt hesitate to run that setup the MGMs are good controllers just a bit pricey to buy new next to mamba controllers. I never had any heat issues so didnt need to fit a cooling fan

I have a 120A 10 cell lipo MGM controller that I ran in my Brushless Hyper 7 that im selling. The manual for it is here. Its model number 12032-3, specs are on page 8. I also have a UBEC to go with it. Looking for around £80 posted. Cheers

hush matt

Any one have a spare EB4 s3 roller for sale?

Thanks for the compliments guys

Sorry it took a while for those of you that were present at any of these bashes. Enjoy!

anybody intrested in these last few bits?

battery tray sold anybody intrested in the last few bits?

Rest is still for sale if any one is intrested happy to take offers

Wheels sold open to offers on the rest. thanks sean

motor and cc BEC sold, thanks

Hi all this stuff is up here to sell so I am open to reasonable offers, prices include postage. Feels free to ask any questions. I am looking for some hyper spares mainly a steel spur gear and engine mounts but will consider swaps for other hyper 7 or eb4 spares. A set of hyper 7 shocks including a handful of plastic spares and 3 spare shock shafts. £10 Prolux Lipo balance charger for 2-4 cell, no balance leads are included. £15 Li-saver works with 2 to something like 12 cells primarily designed for planes but can be used in cars, it reduces the power slowly to keep the voltage per cell up as appose to cutting the power. £8 Cellpro 4s DPM this is a combined BEC and voltage cut off for use with 4 cell lipo. £8 Battery tray, it has had two holes drilled into it and screwed down other than that in good condition, details [sOLD] A full set of ofna 1/8 buggy foams that have never been ran. [sOLD] Feigao 7XL motor, has a 5mm shaft 2382kv can supply with a pinion or two if needed contact me. [sOLD] Castle creations BEC can take 6s lipo input and output a max of 10A, never been used. [sOLD]