Bred2shred

Sold.

Hey folks, bought this a couple of months ago and haven't touched it since. This model is discontinued, so unbuilt ones are becoming quite rare. You can decal it for rossi or haydon and it comes with the metal detail parts and all the parts bags are sealed. I bought all the acrylic paint pots as per the instructions but you will need some spray can colours to complete. Looking for

Bump

More than willing to listen to sensible offers.

bump

Hey there folks. I'd put this set up together over the past few months with the intention of fixing it up and learning to fly over the winter and give this heli lark a proper go in the summer. Unfortunately my other hobby needs some money thrown at it so this has to go. I bought the heli from ebay which had been damaged in a boom strike and i have replaced all the broken parts with new helivol spares. Which are new main blades, new boom, stabilisation and brace parts on the boom, feathering shaft and some linkage parts in the head. Electrics are all acer labs, 3100kv brushless motor, 40a esc, G1000 giro and acer 8g servos. Radio is a brand new, never used Spektrum DX6i with DSMX and it somes with an AR6210 reveiver. Also included is a rapidpro 4S charger with balance board and 240v power supply, 2 11.1v lipos one 1800mah 25c and a brand new 2200mah 25c. Spares include 1 new canopy 1 used, used main frame in good condition, new rudder control rod, new tail parts, new pitch rod, new spindle bushes, newmain mast, 2 new feathering shafts, new boom, new set of blades, used belt, a used main mast and box with useful screws, washers and nuts. I'll also include the radio gear i got it with which is a 35mhz 6 channel with receiver and a spare esky balance charger, plus a set of nut drivers for working on the heli, training gear and an alien command stabilisation unit which is damaged but may be repairable. Full instructions are also included. Looking for

I know there's a few MTB'rs lurking on here and thought someone might like these. As the title would suggest i'm selling my reba teams. To be honest i've not used these forks a huge amount, cant be much more than 100 hundred miles offroad. The only damage is that one of the stickers got scraped a bit while on my cycle rack, but i am supplying the spare set of decals in gold if you want to replace them, there is also a couple of marks but their very light. Fork also comes with the 80mm spacer (forks are at 100mm and can be increased to 120mm internally) a pushloc remote and the manual. These are a top quality short travel fork and easily the lightest and plushest fork i have used. Looking for

Around the

As title X1 gaming headset for the xbox 360, used a handful of times brilliant for playing call of duty online, you can hear people reloading from halfway across the map with these on. All cables supplied to connect it up.

Still for sale if anyone wants to make a reasonable offer.

Approximately 100g.

Was brought this watch back from spain (as thats the only place you can buy them) worn it a few times but the big dial doesn't suit my skinny wrists, it's 45mm diameter. Couple of small scratches nothing major. Here's a link to the website http://www.watx-relojes.com/en/watches-130110181910000000/watx/scafandro-291209145410000000.html

Swap deal agreed please close.

Swap deal pending.

To be honest i'd rather keep the spares with the car. One and only price drop before ebay and a pic of chassis condition. Now

Bump.

It's the original '08 spec but the car has only done one seasons racing. Thanks for your interest.

You asked me the exact same question on another forum, and i'm not looking for a swap, unless you have a set of nearly new rockshox recon suspension forks. I will let you know jon, if it doesn't sell in a week it's going on flea bay and i'll sell you the pin tool separate.

The car has been cleaned and rebuilt and all broken or worn parts replaced and this includes all drive pins and cvd pins, so everythings nice and tight again. There's no shell with the car but most people like their own race colours anyway. Comes with 3 sets of wheels and tyres, set of angle spikes, a set of crimefighters and a set of grp cone spikes (one of the hexes is rounded on these but tyres are fine) Spares include nip upper arm ball joints, nip front lower arm, nip ferrodo brake pads, nip bearing set, spares radio box, 15t + 16t clutch bells, fly wheel, some new clutch bearings, full tube of new 8mm bearings, 2 new chassis skids, some shock pistons, wing mount spares, bulkhead half, 2 new c6 novarossi plugs, 3 1600mah flat packs, fuel bottle, 9 new air filter foams, 3 air filters one water proof, selection of oils some new, set of hudy drivers, some ball drivers, wheel wrench, custom made drive pin tool and some curved body scissors. I'll also thow in anything else i can find r/c related like screws and stuff. It'll come with the original box and manual too. This lot would give someone new a great start into racing as it covers alot of bases. Any questions just ask.

I have a Losi 8t 2.0 roller for sale. http://www.msuk-forum.co.uk/index.php?showtopic=78665

Whats wrong with the xray 808 i offered to you on the csor forum? It's just that you never got back to me on the subject. If your really looking for one i'll be glad to negotiate.

One and only price drop before it goes on ebay.

Bump

Hey there folks her is my Losi 8t 2.0 I've used this once since buying it from jimmi price and we all know what standard he keeps his kits to. Comes with all the bits you get with a new one like springs, clutch bell, some tools and sway bars, i'll also chuck in a 1600mah hump pack thats been charged once and a set of nearly new mugen clutch shoes. £200 posted, in it's original box with the manual