jjl5590

Yep I've still got all my connectors with 4mm banana plugs from the Hyperion 🙂👍

Looks good to me - cheers

Around £50

Hi all, I've decided to sell my trusty Hyperion charger due to it needing an external power supply, which I've also sold. Since it was about 10 years ago since I purchased it, can anyone recommend a good new lipo charger with a built-in power supply? Is this one any good? SKYRC Genuine iMAX B6AC V2 Cheers

WTB Tekno Eb48 roller

Looking for a buggy roller

Thanks for the offer and kind words! Appreciate it. But I think I will try and hold out a little longer

Hyperion EOS 0610i DUO Battery Field Charger for Lipo/LiIon/LiFe/NiCD/NiMH/PB Lead Acid - £75 Battery types: 1-6 cells LiPo; 1-6 cells LiIon; 1-6 cells A123 (LiFePO4); 1-16 cells NiCD/NiMH; 1-12 cell lead-acid batteries. Balancing features: Two built-in balancers, one for each charging port Charge current: 0.1A-10A in 0.1A steps. I like this feature, since I have LiPo packs that are all over the board when it comes to capacity, down to small 200mAh packs, and this allows me to charge them at an exact (and safe) rate. Maximum charge output: A whopping 360 watts Input voltage range: 11V to 26V — good if you're charging big packs Input and display: Five buttons and a backlit LCD. It's nice and bright and allows you to change charge settings in almost pitch black conditions. Memory setup: 20 presets for battery packs, 10 per charger port Air conditioning: Via two fans Requires power supply, please see my other items for sale. https://www.rcgroups.com/forums/showthread.php?825005-Hyperion-EOS-0610i-DUO-Multichemistry-Charger-Review

Brand new, stripped from a new 2021 Traxxas X-Maxx - £100 RRP £230 Specification Input Voltage: 4s/6s/8s LiPo (Max 33.6 Volts) Case Size: 2.23in (58mm) x 2.83in (72mm) x 1.81in (46mm) Weight: 215.5g (7.60oz) On Resistance Forward: 0.00075 Ohms On Resistance Reverse:0.00075 Ohms BEC Voltage: 6.0V BEC Continuous Current: 10A BEC Peak Current: 20A Power Wire: 10-Gauge Maxx® Cable Input Harness Wire: 26 Gauge / 100mm Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Battery Input Connector : Traxxas High-Current Connector Motor Types : Brushless Ports: RX Input, auxiliary fan, Traxxas accessory port

HPI Mounted Phaltline Tires 140x70mm On Blast Wheel Chrome #4729 - £45 - 17mm hex - Set of 4 - Belted using high tensile fishing thread

TP Power TP4070 2080kv brushless motor - £110 - Huge power, measures 40x107cm - 5mm shaft w/flat spot - Upgraded faceplate screws installed - Sealed can Parameters: Can: Smooth T: 4D KV: 2080 Max Amps (A): 300 Max Volt (V): 24 Continuous Power (W): 3850 Max Power (W): 7600 Max RPM: 50 K Internal Resistance (Ohm): 0.0024 No-load Current (A): 9.8 Shaft Diameter (mm): 5 Flat spot: Yes Diameter X Length (mm): 39.5 X 107 Weight: 505 g Pole: 4-pole

MAAS SPS 9400 BENCH POWER SUPPLY 230V 40A DC Regulator 3-15V DC - £115 High efficiency Low ripple and noise Excellent load and line regulation Thermostat control fan cooling Over voltage protection at 16.5V The series of HIGH POWER SWITCHING MODE DC REGULATED POWER SUPPLIES provide high current 40 Amps output in a lightweight and compact size case. They are suitable for a wide range of uses, such as radio equipment, and are ideal for high power car stereo work. In addition to variable output from 3 to 15VDC, a fixed 13.8VDC can be selected. Overload, Over temperature, and Over voltage protection are standard. 40A current output High efficiency Adjustable output voltages 3V to 15V 13.8V lock control Light weight and small size Over temperature protection Over voltage protection at 16.5V Variable speed thermally controlled fan. High RFI stability Power factor correction >0.95 Housing are available in Pantone warm grey 1C or Pantone 433C dark grey Overload protection with constant current Floating ground Low Ripple & Noise

2pcs Zeee 14.8V Lipo Battery 4S 100C 9000mAh EC5 - £120 **Used once to test fitment in an X-maxx - perfect fit!** 45+ mins runtime in a Traxxas X-maxx Specification: Brand: Zeee Voltage: 14.8V Capacity: 9000mAh Discharge Rate(C): 100C Configuration: 4S1P Connector Type: EC5 Plug Balancer Connector Type: JST-XH Length: 166mm/6.53inch Width: 49.5mm/1.95inch Height: 41mm/1.61inch Weight(±10g): 736g/25.96oz/pc

2x CNHL 9500MAH 14.8V 4S 90C LIPO BATTERY EC5 - £150 - Brand new - Perfect fit for Traxxas X-Maxx - 45+ mins runtime in an X-Maxx Thanks for looking - check out my other items! Description: Brand: CNHL Racing Series 14.8V 9500mAh LIipo Battery Capacity: 9500mAh Connector: EC5 Weight: 751g (Including wire and connector) Size:42X48X168.2mm Color: As Shown Caution: Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water. Package Included: 2x CNHL Racing Series 14.8V 9500mAh Lipo Batteries

Hobbywing Max6 v3 ESC - £95 Includes large capacitor pack for added reliability. Popular X-Maxx replacement, fits in stock location. Comes fitted with: - Fan shroud protection - EC5 connector - RX wire for voltage telementry - SAGA 50v 4100 Cap Pack with Board *THE ORIGINAL BEAST* Thanks for looking Continuous Current: 160A Peak Current: 1,050A Motor Type: Sensored / Sensorless Brushless Motor (only in sensorless mode) Applications: 1/6th Touring Car, Buggy, Truggy and Truck Motor Limit: With 6S LiPo/18S NiMH: KV <1500 (5892 size motor); With 8S LiPo/24S NiMH: KV <1200 (5892 size motor) LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC) Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller) Size (LxWxH): 70x56x46.5mm Weight: 240g Programming Port: FAN /PRG Port

Hi All, Gutted to be making this post 😩 I bought it new from Modelsport in May 2021 - can forward receipt for proof and warranty --- *USED ONCE* It was a present to myself for finishing my degree, however I have just been made redundant out of the blue so it is with a heavy heart that I can no longer keep this. Bought new from Modelsport UK in May and not used until July, as I was waiting ages for lipo batteries to arrive from Aliexpress. Its only been used ONCE on grass in the park. Note: I have modified the chassis to fit the Hobbywing Max5 ESC in stock location, to lower the COG. Also there is some silicone residue on the outside of the bodyshell leftover from when I attempted to strengthen the shell following a youtube tutorial, but it didn't work out so I ended up removing it all. Comes with the following: - Shock covers - Plastic bodyshell reinforcements - Powerful front & rear LED lights which are remote-operated - Hobbywing Max 5 ESC - Radiolink RC6GSv2 6-channel radio w/R7FG 7-channel receiver - 2s 2800mAh transmitter lipo The Radiolink has a huge 600 metre range from dual antennas, a built-in gyro and battery voltage telemetry with low-voltage alarm. Like the truck, the Max5, radio and everything else are all new. Going to try and look to recover as many funds as I can for this so asking for £900. Doubt that I will get this though. Collection preferred from North London. Thanks for any interest

Added CNHL 9500MAH 14.8V 4S 90C LIPO BATTERY With EC5

Arrma Talion v4 6S rolling chassis upgraded - £230 (https://www.ebay.co.uk/itm/154542013552) TP Power TP4070 2080kv brushless motor - £125 (https://www.ebay.co.uk/itm/154542018548) HRB Graphene 6s 5000mAh 100C lipo - £55 (https://www.ebay.co.uk/itm/154541857097) Hobbywing Max6 esc & cap pack - £105 (https://www.ebay.co.uk/itm/154542028564) Traxxas X-Maxx - XMaxx VXL-8S ESC 3496 Brand New - £105 (https://www.ebay.co.uk/itm/154543166771) Radiolink RC6GS 6-channel radio w/R7FG 7-channel receiver - £55 (https://www.ebay.co.uk/itm/154542029577) Arrma dBoots KATAR T 6S Tire/Wheel Set 5x - £45 (https://www.ebay.co.uk/itm/154542025309) HPI Phaltline Tyres 140x70mm On Blast Wheel Chrome - £50 (https://www.ebay.co.uk/itm/154542027869) CNHL 9500MAH 14.8V 4S 90C LIPO BATTERY With EC5 - Two Available - Brand New - £85 (https://www.ebay.co.uk/itm/154549162445)

Looks like a neat idea except I'm not sure that clip would fit around the front bumper. Also it looks very long and is flexible so not sure how I would stow it

Hi all, Has anyone come up with an inventive solution to carrying around the X-Maxx? With batteries mine's too heavy to lug around, so was thinking how I could tie something to the front bumper to pull it along, and store it inside the body when not in use...

£650

Thanks for the interest - would rather sell as a package so will see if this goes on ebay. If not, I'll look to split

Looking to sell all in one ideally

Car minus stock electronics. But I miscalculated the price on that, reduced by a further £100.

Brand new. Taken from a new 2021 Traxxas X-Maxx. Traxxas X-Maxx Transmitter TQi Link Enabled 2ch 6528 Traxxas 6533 5 Channel Micro TQi Receiver With TSM/Telemetry £50